Result
| product_id |
short_description |
full_description |
meta_keywords |
meta_description |
search_words |
promo_text |
unit_name |
| 2130 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2131 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2132 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2133 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2134 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2135 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2136 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2137 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2138 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2139 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2140 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2141 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2142 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2143 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2144 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2145 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2146 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2147 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2148 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2149 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2150 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2151 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 3833 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 3834 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|