Result
| product_id |
short_description |
full_description |
meta_keywords |
meta_description |
search_words |
promo_text |
unit_name |
| 2164 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2165 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2166 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2167 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2168 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2169 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2170 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2171 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2172 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2173 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2174 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|
| 2175 |
|
Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
|