SELECT 
  cscart_ult_product_descriptions.product_id, 
  cscart_ult_product_descriptions.short_description, 
  IF(
    cscart_ult_product_descriptions.short_description = "", 
    cscart_ult_product_descriptions.full_description, 
    ""
  ) AS full_description, 
  cscart_ult_product_descriptions.meta_keywords, 
  cscart_ult_product_descriptions.meta_description, 
  cscart_ult_product_descriptions.search_words, 
  cscart_ult_product_descriptions.promo_text 
FROM 
  cscart_ult_product_descriptions 
WHERE 
  cscart_ult_product_descriptions.product_id IN (
    6963, 6952, 6953, 3484, 3487, 3485, 3486, 
    6969, 3434, 6947, 3424, 3911, 3422, 
    3910, 3421, 3909, 3420, 3423, 3912, 
    3430, 3429, 3437, 3436, 3438, 6959, 
    3425, 6958, 6960, 6968, 6961, 6964, 
    6957, 6956, 6954, 6955, 3500, 3501, 
    3431, 6948, 3499, 3914, 3913, 3455, 
    3466, 3454, 3456, 3449, 3461, 3441, 
    3444, 3471, 3442, 3480, 3448, 3440, 
    3467, 3468, 3435, 3476, 3447, 3439, 
    3465, 3446, 3460, 3443, 3469, 3464, 
    3459, 6950, 3470, 3457, 3462, 3450, 
    3458, 3463, 3451, 3445, 3472, 3481, 
    3482, 3475, 3483, 3474, 3473, 3426, 
    6949, 3427, 3477, 3452, 3478, 3479, 
    3453, 3491, 3488, 3497, 3495
  ) 
  AND cscart_ult_product_descriptions.company_id = 1 
  AND cscart_ult_product_descriptions.lang_code = 'en'

Query time 0.00134

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "75.71"
    },
    "table": {
      "table_name": "cscart_ult_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id",
        "company_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code",
        "company_id"
      ],
      "key_length": "13",
      "rows_examined_per_scan": 96,
      "rows_produced_per_join": 96,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_ult_product_descriptions`.`company_id` = 1) and (`gaseus`.`cscart_ult_product_descriptions`.`product_id` in (6963,6952,6953,3484,3487,3485,3486,6969,3434,6947,3424,3911,3422,3910,3421,3909,3420,3423,3912,3430,3429,3437,3436,3438,6959,3425,6958,6960,6968,6961,6964,6957,6956,6954,6955,3500,3501,3431,6948,3499,3914,3913,3455,3466,3454,3456,3449,3461,3441,3444,3471,3442,3480,3448,3440,3467,3468,3435,3476,3447,3439,3465,3446,3460,3443,3469,3464,3459,6950,3470,3457,3462,3450,3458,3463,3451,3445,3472,3481,3482,3475,3483,3474,3473,3426,6949,3427,3477,3452,3478,3479,3453,3491,3488,3497,3495)) and (`gaseus`.`cscart_ult_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "66.11",
        "eval_cost": "9.60",
        "prefix_cost": "75.71",
        "data_read_per_join": "366K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "company_id",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text
3420 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.700 mminlet W30x2RH nut acc. to DIN 477-5, No. 59, with 90° angle<br />outlet M20x1,5RHk nut - 12S
3421 <p>flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.700 mminlet W30x2RH nut acc. to DIN 477-5, No. 54 inert gas/N2, with 90° angle</p><p>outlet M20x1,5RHk nut - 12S</p>
3422 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.700 mminlet W24,32x1/14RHf nut acc. to DIN 477-1, No. 10, with 90° angle<br />outlet M20x1,5RHk nut - 12S
3423 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.700 mminlet G3/4RHf nut acc. to DIN 477-1, No. 9, with 90° angle<br />outlet M20x1,5RHk nut - 12S
3424 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.700 mminlet W21,8x1/14RHf nut acc. to DIN 477-1, No. 6, with 90° angle<br />outlet M20x1,5RHk nut - 12S
3425 <p>free of oil- and grease, for inert gas, fuel gas and oxygen, BAM - approved,consisting of: 2 HP double shut-off valve, 2 pressure regulator HR 20 acc. to ISO 7291, BAM - approved with membrabe and HP-contact gauges with inductive-contact, in Ruhestellung geöffnet, bei steigendem Druck schließend, incl. 2 Meter langem, 2 pol. Anschlußkabel, Farbe "blau", Abblaseventile mit montiertem Cu-Rohrbogen (270°, 10x1 mm), 1 change over block and 2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet pressure max: 300 bar<br><br>outlet pressure: 20 bar fixed<br><br>flow max: 170 Nm³/h air at 20 bar outle tpressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 40/20 bar<br><br>width x height x depth: 875 x 325 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
3426 <p>acc. to DIN EN ISO 2503, class 20, single stage, with double flowmeter for exact control of the flow in Nl/min, with high pressure compensation for constant working pressure with safety gauge acc. to ISO 5171, with shut off valvesinlet pressure max: 200 bar</p><p>outlet pressure: 2x 2,5 bar pre adjusted<br><br>flow: 2 x 3,0 - 30,0 Nl/min. adjustable<br><br>inlet: W 21,8x1/14 RH nut acc. to DIN 477-1, no. 6<br><br>outlet: 2x G 1/4 RHk x 6 mm tail-piece acc. EN 560<br><br>inlet gauge: 0 – 315/200 bar<br><br>width x height x depth: 250 x 230 x 130 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape<br><br><br><br>Replaces article 2264551189</p>
3427 <p>acc to DIN EN ISO 2503, class 10, single stage, with double flowmeter for exact control of the flow in Nl/min, with high pressure compensation for constant working pressure with safety gauge acc. to ISO 5171, with shut off valveinlet pressure max: 200 bar</p><p>outlet pressure: 1,5 bar pre adjusted<br><br>flow: 2 x 4 – 42 Nl/min. adjustable<br><br>inlet: W 24,32x1/14 RH nut acc. to DIN 477-1, no. 10<br><br>outlet: 2x G 1/4 RHk x 6 mm tail-piece acc. EN 560<br><br>inlet gauge: 0 – 315/200 bar<br><br>width x height x depth: 250 x 230 x 130 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3429 single stage, with safety gauges acc. to ISO 5171inlet pressure max: 60 bar<br />outlet pressure: 0 – 20 bar adjustable<br />flow max: 90 Nm³/h compressed air at 20 bar outlet pressure<br />in- and outlet: G3/8 RH female<br />inlet gauge: 0- 100/60 bar<br />outlet gauge: 0 – 40/20 bar <br />width x height x depth: 220 x 200 x 75 mm <br />with label on regulator
3430 einstufige Bauart, mit Sicherheitsmanometern nach ISO 5171, Eingangsdruck max: 40 bar<br />Ausgangsdruck: 0 – 20 bar regelbar<br />Leistung max: 90 Nm³/h Druckluft bei 20 bar Hinterdruck <br />Ein- und Ausgang: Klemmring Ms 12 mm<br />ohne Eingangsmanometer<br />Ausgangsmanometer: 0 – 40/20 bar senkrecht<br />Breite x Höhe x Tiefe: 220 x 200 x 75 mm <br />mit Typenschild auf Druckminderer, mit Werkszeugnis 2.2 Bedienungsanleitung, Etikett mit Lindenummer/öl- und fettfrei auf Folie und Karton
3431 <p>acc. ISO 7291, single stage, with safety pressure gauges acc. ISO 5171</p><p>inlet pressure max: 25 bar<br><br>outlet pressure: 0 – 1,5 bar regelbar<br><br>Flow max: 18 Nm³/h at 1,5 bar outlet pressure <br><br>inlet connection: M24x1,5RHak male<br><br>outlet connection: M24x1,5RHak male<br><br>inlet pressure gauge: 0 – 40/ 25 bar<br><br>outlet pressure gauge: 0 – 2,5/ 1,5 bar<br><br>Width x heighth x depth: 232 x 185 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape and certificate 2.2</p>
3434 <p>to pre heat the gas in the high pressure area, PN 200, heating power 200 W, protection class housing: IP65, plug: IP44, supply voltage 230V/ 50 Hz,</p><p>complete with electric cable 2m and plug, inlet W21,8x1/14RHf nut, outlet W21,8x1/14RHf male</p>
3435 single stage with safety gauge acc. to ISO 5171, inlet pressure max: 20 bar<br />outlet pressure: 0 – 4 bar adjustable<br />flow max: 10 kg/h at 4 bar working pressure<br />inlet: W 21,8x1/14 LH nut acc. to DIN 477<br />outlet: G 3/8 LHk x 9 mm tail-piece EN 560<br />outlet gauge: 0 – 6/4 bar<br />width x height x depth: 198 x 134 x 75 mm<br />with Linde-Logo on body, with Linde-tape and Linde operating manual<br />
3436 In-line regulator for non aggressive gasesnot to use for: He/H2/C2H2/C3H8/CH4/C2H2<br />inlet pressure: max. 40 bar<br />working pressure : 0 - 20 bar adjustable<br />membrane : PTFE coatet<br />inlet gauge: without <br />working gauge : acc. to ISO 5171, 0- 40/20 bar<br />inlet an doutlet connection: 18 mm brass two ferrule compression type fitting<br />flow : max. 90 m3/h<br />free of oil- and grease<br />width x height x depth: 220 x 200 x 75 mm <br />With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "N", additional sticker on foil: "No cost-free redemption when foil is damaged "<br />The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br />Test report and test report 2.2
3437 <p>single stage, inlet pressure: max. 40 bar</p><p>working pressure : 0 - 20 bar adjustable<br><br>diaphragm: PTFE coatet<br><br>inlet gauge: without <br><br>working gauge : acc. to ISO 5171, 0- 40/20 bar<br><br>inlet an doutlet connection: 18 mm brass two ferrule compression type fitting<br><br>flow : max. 90 m3/h compresse air at 20 bar working pressure<br><br>free of oil- and grease<br><br>width x height x depth: 220 x 200 x 75 mm <br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
3438 In-line regulator, single stage,inlet pressure: max. 40 bar<br />working pressure : 0 - 20 bar adjustable<br />membrane : PTFE coatet<br />inlet gauge: without <br />working gauge : acc. to ISO 5171, 0- 40/20 bar<br />inlet an doutlet connection: 18 mm brass two ferrule compression type fitting<br />flow : max. 90 m3/h<br />free of oil- and grease<br />width x height x depth: 220 x 200 x 75 mm <br />With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br />The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br />Test report and test report 2.2
3439 acc to DIN EN ISO 2503, class 3, single stage, with safety gauges acc. to DIN ISO 5171,<br />with shut off valve<br />inlet pressure max:200 bar<br />outlet pressure: 0 – 10 bar adjustable<br />flow max:48 Nm³/h air at 10 bar outlet pressure <br />inlet connection: W 24,32x1/14 RH nut acc. to DIN 477-1, no. 10<br />outlet connection: G 1/4RH x 6mm tail-piece acc. EN560<br />inlet gauge: 0 – 315 /200 bar<br />working gauge: 0 – 16/10 bar<br />width x height x depth: 210 x 190 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3440 <p>acc to DIN EN ISO 2503, class 3, double stage, with safety gauges acc. to DIN ISO 5171, with shut off valve</p><p>inlet pressure max: 200 bar<br><br>outlet pressure: 0 – 10 bar adjustable<br><br>flow max: 28 Nm³/h air at 10 bar outlet pressure <br><br>inlet: W24,32x1/14RH nut acc. to DIN 477-1, no. 10<br><br>outlet: G 1/4 RHk male with 6mm tail-piece,<br><br>inlet gauge: 0 – 315 /200 bar<br><br>working gauge: 0 – 16/10 bar<br><br>width x height x depth: 240 x 190 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3441 according to DIN EN ISO 2503, with inlet pressure compensation for constant downstream pressure when the inlet pressure falls, with safety pressure gauges in accordance with ISO 5171, with shut-off valveInput pressure max: 200 bar<br />Output pressure: 0 – 30.0 bar<br />Performance: 40 Nm³/h compressed air at 30 bar back pressure<br />Input: W 24.32x1/14 RH Ü-nut according to DIN 477-1, No. 10<br />Output: G 3/8 RHk x 9 mm hose nozzle according to EN 560<br />Input pressure gauge: 0 – 315/200 bar<br />Output pressure gauge: 0 - 60/40 bar<br />Width x Height x Depth: 210 x 230 x 75 mm<br />with Linde logo on the housing, with Linde operating instructions and Linde adhesive tape
3442 <p>acc to DIN EN ISO 2503 class 0, double stage, with safety gauges acc. to DIN ISO 5171, including shut off valve</p><p>inlet pressure max: 200 bar<br><br>outlet pressure: 0 – 1,5 bar adjustable<br><br>flow max: 5 Nm³/h air at 1,5 bar outlet pressure <br><br>inlet: W24,32x1/14RH nut acc. to DIN 477-1, no. 10<br><br>outlet: G 1/4 RHk male with 6 mm tail-piece,<br><br>inlet gauge: 0 – 315 /200 bar<br><br>working gauge: 0 – 2,5/1,5 bar<br><br>width x height x depth: 240 x 190 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3443 acc. to ISO 2503, class 5, single stage, with high pressure compensation for constant working pressure, with safety gauges acc. to ISO 5171, with shut off valve,inlet pressure max.: 200 bar<br />outlet pressure: 0 – 20 bar adjustable<br />flow max.: 75 Nm³/h air at 10 bar working pressure<br />Inlet connection: W24,32x1/14RH nut acc. to DIN 477-1, no. 10<br />outlet connection: G 1/4 RHk x 6 mm tailpiece acc. to EN 560<br />inlet gauge: 0 - 315/200 bar<br />working gauge: 0 - 40/20 bar<br />width x height x depth: 210 x 210 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3444 acc to DIN EN ISO 2503, single stage, with high pressure compensation for a constant working pressure on falling inlet pressure with safety gauges acc. to DIN ISO 5171inlet pressure max:200 bar<br />outlet pressure: 0 – 40 bar adjustable<br />flow max: 120 Nm³/h at 40 bar working pressure<br />inlet connection: W24,32x1/14RHf nut acc. to DIN 477-1, no. 10<br />outlet connection: G 1/4RH x 6mm tail-piece<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 60/40 bar<br />width x height x depth: 210 x 210 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3445 acc to DIN EN ISO 2503, single stage, with high pressure compensation for a constant working pressure on falling inlet pressure with safety gauges acc. to DIN ISO 5171inlet pressure max:200 bar<br />outlet pressure: 0 – 60 bar adjustable<br />flow max: 140 Nm³/h at 60 bar working pressure<br />inlet connection: W24,32x1/14 RHf nut acc. to DIN 477-1, no. 10<br />outlet connection: G 1/4RHak acc. to EN560<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 100/60 bar<br />width x height x depth: 210 x 210 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3447 acc. to ISO 2503, class 3, single stage, with safety gauges acc. to ISO 5171, with shut off valve,inlet pressure max.: 200 bar<br />outlet pressure: 0 – 10 bar adjustable<br />flow max.: 48 Nm³/h air at 10 bar working pressure<br />Inlet connection: W21,8x1/14LH nut acc. to DIN 477-1, no. 1<br />outlet connection:G 3/8 RHk x 9 mm tailpiece acc. to EN 560<br />inlet gauge: 0 - 315/200 bar<br />working gauge: 0 - 16/10 bar<br />width x height x depth: 210 x 190 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3448 <p>acc to DIN EN ISO 2503, class 3, double stage, with safety gauges acc. to DIN ISO 5171</p><p>inlet pressure max: 200 bar<br><br>outlet pressure: 0 – 10 bar adjustable<br><br>flow max: 28 Nm³/h air at 10 bar outlet pressure <br><br>inlet: W21,8x1/14LH nut acc. to DIN 477-1, no. 1<br><br>outlet: G 3/8 LHk male with 9mm tail-piece,<br><br>inlet gauge: 0 – 315 /200 bar<br><br>working gauge: 0 – 16/10 bar<br><br>width x height x depth: 240 x 190 x 75 mm</p>
3449 acc. to ISO 2503, class 5, single stage, with high pressure compensation for constant working pressure, with safety gauges acc. to ISO 5171, with shut off valve,inlet pressure max.: 200 bar<br />outlet pressure: 0 – 20 bar adjustable<br />flow max.: 75 Nm³/h air at 10 bar working pressure<br />Inlet connection: W21,8x1/14LH nut acc. to DIN 477-1, no. 1<br />outlet connection: G 3/8 LHk x 9 mm tailpiece acc. to EN 560<br />inlet gauge: 0 - 315/200 bar<br />working gauge: 0 - 40/20 bar<br />width x height x depth: 210 x 210 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3450 acc to DIN EN ISO 2503, single stage, with high pressure compensation for a constant working pressure on falling inlet pressure with safety gauges acc. to DIN ISO 5171inlet pressure max:200 bar<br />outlet pressure: 0 – 40 bar adjustable<br />flow max: 120 Nm³/h at 40 bar working pressure<br />inlet connection: W21,8x1/14LHf nut acc. to DIN 477-1, no. 1<br />outlet connection: G 3/8LH x 9mm tail-piece<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 60/40 bar<br />width x height x depth: 210 x 210 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3451 acc to DIN EN ISO 2503, single stage, with high pressure compensation for a constant working pressure on falling inlet pressure with safety gauges acc. to DIN ISO 5171inlet pressure max:200 bar<br />outlet pressure: 0 – 60 bar adjustable<br />flow max: 140 Nm³/h at 60 bar working pressure<br />inlet connection: W21,8x1/14LHf nut acc. to DIN 477-1, no. 1<br />outlet connection: G 3/8LHak acc. to EN560<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 100/60 bar<br />width x height x depth: 210 x 210 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3452 <p>acc to DIN EN ISO 2503, class 3, single stage, with safety gauges acc. to DIN ISO 5171,</p><p>with shut off valve<br><br>inlet pressure max: 200 bar<br><br>outlet pressure: 0 - 30 Nl/min. (0 – 10 bar) adjustable<br><br>flow max: 30 Nl/min. at 10 bar outlet pressure <br><br>inlet connection: W 21,8x1/14 LH nut acc. to DIN 477-1, no. 1<br><br>outlet connection: G 3/8 LHk x 9 mm tail-piece acc. EN560<br><br>inlet gauge: 0 – 315 /200 bar<br><br>working gauge: 0 – 30 Nl/min.<br><br>width x height x depth: 210 x 190 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3453 <p>acc to DIN EN ISO 2503, class 3, single stage, with safety gauges acc. to DIN ISO 5171,</p><p>with shut off valve<br><br>inlet pressure max: 200 bar<br><br>outlet pressure: 0 - 50 Nl/min. (0 – 10 bar) adjustable<br><br>flow max: 50 Nl/min. at 10 bar outlet pressure <br><br>inlet connection: W 21,8x1/14 LH nut acc. to DIN 477-1, no. 1<br><br>outlet connection: G 3/8 LHk x 9 mm tail-piece acc. EN560<br><br>inlet gauge: 0 – 315 /200 bar<br><br>working gauge: 0 – 50 Nl/min.<br><br>width x height x depth: 210 x 190 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3454 acc to DIN EN ISO 2503, class 3, with high pressure compensation for constant working pressure, single stage, with shut off valve, with safety gauges acc. to ISO 5171inlet pressure max: 200 bar<br />outlet pressure: 0 – 10 bar adjustable<br />Flow max: 48 Nm³/h compressed air at 10 bar working pressure<br />inlet: W 21,8x1/14 RH Ü-Mutter nach DIN 477-1, No. 6<br />outlet:G 1/4 RHk x 6 mm tail-piece acc. to EN 560<br />inlet gauge: 0 – 315/200 bar<br />outlet gauge: 0 – 16/10 bar<br />width x hight x depth: 210 x 190 x 75 mm<br />with metal diaphragm, 5m hose #400 206 01, 2 hose clamp VA #400 223, 1 tail piece #402 003, 1 nut #402 021, 1 cylinder rack #410 040 01, complete blistered with label "free of oil and grease" with operating manual Linde in box
3455 acc to DIN EN ISO 2503, class 3, with high pressure compensation for constant working pressure, single stage, with shut off valve, with safety gauges acc. to ISO 5171inlet pressure max: 200 bar<br />outlet pressure: 0 – 10 bar adjustable<br />Flow max: 48 Nm³/h compressed air at 10 bar working pressure<br />inlet: W 24,32x1/14 RH Ü-Mutter nach DIN 477-1, No. 10<br />Ausgang:G 1/4 RHk x 6 mm Tülle nach EN 560<br />outlet:G 1/4 RHk x 6 mm tail-piece acc. to EN 560<br />inlet gauge:0 – 315/200 bar<br />outlet gauge: 0 – 16/10 bar<br />width x hight x depth: 210 x 190 x 75 mm<br />with metal diaphragm, 5m hose #400 206 01, 2 hose clamp VA #400 223, 1 tail piece #402 003, 1 nut #402 021, 1 cylinder rack #410 040 01, complete blistered with label "free of oil and grease" with operating manual Linde in box
3456 <p>acc to DIN EN ISO 2503, class 5, single stage, with high pressure compensation for a constant working pressure on falling inlet pressure with safety gauges acc. to DIN ISO 5171inlet pressure max: 200 bar</p><p>outlet pressure: 0 – 20 bar adjustable<br><br>flow max: 75 Nm³/h at 20 bar working pressure<br><br>inlet connection: W21,8x1/14RHf nut acc. to DIN 477-1, no. 6<br><br>outlet connection: G 1/4RH x 6mm tail-piece<br><br>inlet gauge: 0 – 315 /200 bar<br><br>working gauge: 0 – 40/ 20 bar<br><br>width x height x depth: 210 x 210 x 75 mm</p>
3457 <p>acc to DIN EN ISO 2503, single stage, with high pressure compensation for a constant working pressure on falling inlet pressure with safety gauges acc. to DIN ISO 5171inlet pressure max: 200 bar</p><p>outlet pressure: 0 – 40 bar adjustable<br><br>flow max: 120 Nm³/h at 40 bar working pressure<br><br>inlet connection: W21,8x1/14RHf nut acc. to DIN 477-1, no. 6<br><br>outlet connection: G 1/4RH x 6mm tail-piece<br><br>inlet gauge: 0 – 315/200 bar<br><br>working gauge: 0 – 60/40 bar<br><br>width x height x depth: 210 x 210 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3458 <p>acc to DIN EN ISO 2503, single stage, with high pressure compensation for a constant working pressure on falling inlet pressure with safety gauges acc. to DIN ISO 5171inlet pressure max: 200 bar</p><p>outlet pressure: 0 – 60 bar adjustable<br><br>flow max: 140 Nm³/h at 60 bar working pressure<br><br>inlet connection: W21,8x1/14 RHf nut acc. to DIN 477-1, no. 6<br><br>outlet connection: G 1/4RHak acc. to EN560<br><br>inlet gauge: 0 – 315/200 bar<br><br>working gauge: 0 – 100/60 bar<br><br>width x height x depth: 210 x 210 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3459 acc. to ISO 2503, single stage with safety gauges acc. to EN562inlet pressure max:200 bar<br />outlet pressure: 10 - 200 bar adjustable<br />flow max: 380 Nm³/h at 50 bar outlet pressure <br />inlet connection: W 21,8x1/14 RH nut acc. to DIN 477-1, no. 6<br />outlet connection: W 21,8x1/14 RH male DIN 477-1, no. 6<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 315/200 bar<br />width x height x depth: 170 x 140 x 180 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3460 compressed air, acc. to ISO 2503, class 3, single stage, with safety gauges acc. to ISO 5171, with shut off valve,inlet pressure max.: 200 bar<br />outlet pressure: 0 – 10 bar adjustable<br />flow max.: 48 Nm³/h air at 10 bar working pressure<br />Inlet connection: G 5/8 RH screw acc. to DIN 477-1, no. 13<br />outlet connection:G 1/4 RHk x 6 mm tailpiece acc. to EN 560<br />inlet gauge: 0 - 315/200 bar<br />working gauge: 0 - 16/10 bar<br />width x height x depth: 210 x 190 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3461 acc. to ISO 2503, class 5, single stage, with high pressure compensation for constant working pressure, with safety gauges acc. to ISO 5171, with shut off valve,inlet pressure max.: 200 bar<br />outlet pressure: 0 – 20 bar adjustable<br />flow max.: 75 Nm³/h air at 10 bar working pressure<br />Inlet connection: G5/8RH screw acc. to DIN 477-1, no. 13<br />outlet connection: G 1/4 RHk x 6 mm tailpiece acc. to EN 560<br />inlet gauge: 0 - 315/200 bar<br />working gauge: 0 - 40/20 bar<br />width x height x depth: 210 x 210 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3462 acc to DIN EN ISO 2503, single stage, with high pressure compensation for a constant working pressure on falling inlet pressure with safety gauges acc. to DIN ISO 5171inlet pressure max:200 bar<br />outlet pressure: 0 – 40 bar adjustable<br />flow max: 120 Nm³/h at 40 bar working pressure<br />inlet connection: G5/8RH screw acc. to DIN 477-1, no. 13<br />outlet connection: G 1/4RH x 6mm tail-piece<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 60/40 bar<br />width x height x depth: 210 x 210 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3463 acc to DIN EN ISO 2503, single stage, with high pressure compensation for a constant working pressure on falling inlet pressure with safety gauges acc. to DIN ISO 5171inlet pressure max:200 bar<br />outlet pressure: 0 – 60 bar adjustable<br />flow max: 140 Nm³/h at 60 bar working pressure<br />inlet connection: G5/8RH screw acc. to DIN 477-1, no. 13<br />outlet connection: G 1/4RH acc. to EN560<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 100/60 bar<br />width x height x depth: 210 x 210 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3464 acc. to ISO 2503, single stage with safety gauges acc. to EN562inlet pressure max:200 bar<br />outlet pressure: 10 - 200 bar adjustable<br />flow max: 380 Nm³/h at 50 bar outlet pressure <br />Inlet connection: G 5/8 RHaf screw acc. to DIN 477-1, no. 13<br />Outlet connection: G 5/8 RHif acc. to DIN 477-1, no. 13<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 315/200 bar<br />width x height x depth: 210 x 190 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3465 acc to DIN EN ISO 2503, class 3, single stage, adiabatic compression tested acc. to DIN EN ISO 2503,with safety gauges acc. to DIN ISO 5171<br />inlet pressure max:200 bar<br />outlet pressure: 0 – 10 bar adjustable<br />flow max:48 Nm³/h air at 10 bar outlet pressure <br />inlet connection: G ¾ RH nut acc. to DIN 477<br />outlet connection: G 1/4RH x 6mm tail-piece<br />inlet gauge: 0 – 315 /200 bar<br />working gauge: 0 – 16/ 10 bar<br />width x height x depth: 210 x 190 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3466 acc to DIN EN ISO 2503, class 3, with high pressure compensation for constant working pressure, single stage, with shut off valve, with safety gauges acc. to ISO 5171inlet pressure max: 200 bar<br />outlet pressure: 0 – 10 bar adjustable<br />Flow max: 48 Nm³/h compressed air at 10 bar working pressure<br />inlet: G3/4 RH Ü-Mutter nach DIN 477-1, No. 9<br />outlet:G 1/4 RHk x 6 mm tail-piece acc. to EN 560<br />inlet gauge: 0 – 315/200 bar<br />outlet gauge: 0 – 16/10 bar<br />width x hight x depth: 210 x 190 x 75 mm<br />with metal diaphragm, 5m hose #400 206 01, 2 hose clamp VA #400 223, 1 tail piece #402 003, 1 nut #402 021, 1 cylinder rack #410 040 01, complete blistered with label "free of oil and grease" with operating manual Linde in box
3467 <p>acc to DIN EN ISO 2503,class 3, double stage, adiabatic compression tested acc. to DIN EN ISO 2503,with safety gauges acc. to DIN ISO 5171</p><p>inlet pressure max: 200 bar<br><br>outlet pressure: 0 – 10 bar adjustable<br><br>flow max: 28 Nm³/h air at 10 bar outlet pressure <br><br>inlet: G3/4RH nut acc. to DIN 477-1, no. 9<br><br>outlet: G 1/4 RHk male with 6mm tail-piece,<br><br>inlet gauge: 0 – 315 /200 bar<br><br>working gauge: 0 – 16/10 bar<br><br>width x height x depth: 240 x 190 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3468 <p>nach ISO 2503, Klasse 5, zweistufige Bauart, mit Vordruckausgleich für konstanten Hinterdruck bei fallendem Vordruck, mit Sicherheitsmanometern nach ISO 5171, mit AbsperrventilEingangsdruck max: 200 bar</p><p>Ausgangsdruck: 0 – 20 bar regelbar<br><br>Leistung max: 60 Nm³/h Druckluft bei 20 bar Hinterdruck <br><br>Eingang: G 3/4 RH Ü-Mutter nach DIN 477-1<br><br>Ausgang:G 3/8 RHk x 9 mm Tülle nach EN 560<br><br>Eingangsmanometer:0 – 315/200 bar<br><br>Ausgangsmanometer: 0 – 40/20 bar<br><br>Breite x Höhe x Tiefe: 240 x 210 x 75 mm<br><br>mit Linde-Logo auf Gehäuse, mit Linde-Bedienungsanleitung und Linde-Klebeband</p>
3469 acc to DIN EN ISO 2503, class 5, single stage, adiabatic compression tested acc. to DIN EN ISO 2503, with high pressure compensation for a constant working pressure on falling inlet pressure with safety gauges acc. to DIN ISO 5171inlet pressure max:200 bar<br />outlet pressure: 0 – 20 bar adjustable<br />flow max: 75 Nm³/h at 20 bar working pressure<br />inlet connection: G3/4 RHf nut acc. to DIN 477-1, no. 9<br />outlet connection: G 1/4RH x 6mm tail-piece<br />inlet gauge: 0 – 315 /200 bar<br />working gauge: 0 – 40/ 20 bar<br />width x height x depth: 210 x 210 x 75 mm
3470 acc. to ISO 2503, single stage with safety gauges acc. to ISO 5171inlet pressure max:200 bar<br />outlet pressure: 10 - 200 bar adjustable<br />flow max: 380 Nm³/h at 50 bar outlet pressure <br />inlet connection: G3/4 RH nut acc. to DIN 477-1, no. 9<br />outlet connection: G 3/4 RH male acc. to DIN 477-1, no. 9<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 315/200 bar<br />width x height x depth: 150 x 210 x 120 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3471 acc to DIN EN ISO 2503, single stage, with high pressure compensation for a constant working pressure on falling inlet pressure, with metal diaphragm, with safety gauges acc. to DIN ISO 5171inlet pressure max:200 bar<br />outlet pressure: 0 – 40 bar adjustable<br />flow max: 120 Nm³/h at 40 bar working pressure<br />inlet connection: G3/4RHf nut acc. to DIN 477-1, no. 9<br />outlet connection: G 1/4RH x 6mm tail-piece<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 60/40 bar<br />width x height x depth: 210 x 210 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3472 acc to DIN EN ISO 2503, single stage, with high pressure compensation for a constant working pressure on falling inlet pressure, with metal diaphragm, with safety gauges acc. to DIN ISO 5171inlet pressure max: 200 bar<br />outlet pressure: 0 – 60 bar adjustable<br />flow max:140 Nm³/h at 60 bar working pressure<br />inlet connection: G3/4 RHf nut acc. to DIN 477-1, no. 9<br />outlet connection: G 1/4RHak acc. to EN560<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 100/60 bar<br />width x height x depth: 210 x 210 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3473 <p>acc to DIN EN ISO 2503, class 10, single stage, with flowmeter for exact control of the flow in Nl/min, with high pressure compensation for constant working pressure with safety gauge acc. to ISO 5171, with shut off valveinlet pressure max: 200 bar</p><p>outlet pressure: 4 bar pre adjusted<br><br>flow: 8,5 - 85 Nl/min. adjustable<br><br>inlet: W 24,32x1/14 RH nut acc. to DIN 477-1, no. 10<br><br>outlet: G 1/4 RHk x 6 mm tail-piece acc. EN 560<br><br>inlet gauge: 0 – 315/200 bar<br><br>width x height x depth:: 210 x 230 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3474 <p>acc to ISO 2503, class 20, single stage, with flowmeter for exact control of the flow in Nl/min, with high pressure compensation for constant working pressure with safety gauge acc. to ISO 5171, with shut off valveinlet pressure max: 200 bar</p><p>outlet pressure: 4,5 bar pre adjusted<br><br>flow: 5,0 – 50,0 Nl/min. adjustable<br><br>inlet: W 24,32x1/14 RH nut acc. to DIN 477-1<br><br>outlet: G 1/4 RHk x 6 mm tail-piece acc. EN 560<br><br>inlet gauge: 0 – 315/200 bar<br><br>width x height x depth:: 210 x 230 x 75 mm<br><br><br><br>replaces item 223615</p>
3475 acc to DIN EN ISO 2503, class 10, single stage with flowmeter, with high pressure compensation for a constant working pressure on falling inlet pressure with safety gauges acc. to DIN ISO 5171inlet pressure max: 200 bar<br />outlet pressure: 1,5 bar fixed<br />flow: 2,0 - 23,0 Nl/min. forming gas adjustable<br />Inlet connection: W 21,8x1/14 LH nut acc. to DIN 477-1, no. 1<br />outlet connection: G 3/8 LHk x 9mm tailpiece EN 560<br />inlet gauge: 0 – 315/200 bar<br />width x height x depth: 210 x 230 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3476 <p>acc to DIN EN ISO 2503, class 3, single stage, with safety gauges acc. to DIN ISO 5171, with shut off valve,inlet pressure max: 200 bar</p><p>outlet pressure: 0 – 10 bar adjustable<br><br>flow max: 48 Nm³/h at 10 bar outlet pressure <br><br>inlet connection: W 21,8x1/14 RH nut acc. to DIN 477-1, no. 6<br><br>outlet connection: G 1/4RH x 6mm tail-piece<br><br>inlet gauge: 0 – 315/200 bar<br><br>working gauge: 0 – 16/10 bar<br><br>width x height x depth: 210 x 190 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3477 acc to DIN EN ISO 2503, class 3, single stage, with safety gauges acc. to DIN ISO 5171inlet pressure max: 200 bar<br />outlet pressure: 0-10 bar<br />flow: 0 – 20 Nl/min. adjustable<br />Inlet connection: W 21,8x1/14 RH nut acc. to DIN 477-1, no. 6<br />outlet connection: G 1/4 RHk x 6 mm tailpiece acc. to EN 560<br />inlet gauge: 0 – 315/200 bar<br />outlet gauge: 0 – 20 Nl/min. double scale Ar/CO2 (0 - 10 bar)<br />width x height x depth: 210 x 230 x 75 mm <br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3478 acc to DIN EN ISO 2503, class 3, single stage, with safety gauges acc. to DIN ISO 5171, with shut off valve,inlet pressure max: 200 bar<br />outlet pressure: 0 – 10 bar <br />flow: 0 – 30 Nl/min. adjustable<br />inlet connection: W 21,8x1/14 RH nut acc. to DIN 477-1, no. 6<br />outlet connection: G 1/4RH x 6mm tail-piece<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 30 Nl/min. (0 - 10 bar)<br />width x height x depth: 210 x 190 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde tape
3479 acc to DIN EN ISO 2503, class 3, single stage, with safety gauges acc. to DIN ISO 5171inlet pressure max: 200 bar<br />outlet pressure: 0-10 bar<br />flow: 0 – 20 Nl/min. adjustable<br />Inlet connection: W 21,8x1/14 RH nut acc. to DIN 477-1, no. 6<br />outlet connection: G 1/4 RHk x 6 mm tailpiece acc. to EN 560<br />inlet gauge: 0 – 315/200 bar<br />outlet gauge: 0 – 30 Nl/min. double scale Ar/CO2 (0 - 10 bar)<br />width x height x depth: 210 x 230 x 75 mm <br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3480 <p>acc to DIN EN ISO 2503,class 3, double stage, with safety gauges acc. to DIN ISO 5171</p><p>inlet pressure max: 200 bar<br><br>outlet pressure: 0 – 10 bar adjustable<br><br>flow max: 28 Nm³/h air at 10 bar outlet pressure <br><br>inlet: W21,8x1/14RH nut acc. to DIN 477-1, no. 6<br><br>outlet: G 1/4 RHk male with 6mm tail-piece,<br><br>inlet gauge: 0 – 315 /200 bar<br><br>working gauge: 0 – 16/10 bar<br><br>width x height x depth: 240 x 190 x 75 mm</p>
3481 <p>acc to DIN EN ISO 2503, class 10, single stage with flowmeter, with high pressure compensation for a constant working pressure on falling inlet pressure with safety gauges acc. to DIN ISO 5171inlet pressure max: 200 bar</p><p>outlet pressure: 1,5 bar fixed<br><br>flow: 1,0 – 14,0 Nl/min. argon adjustable<br><br>Inlet connection: W 21,8x1/14 RH nut acc. to DIN 477-1, no. 6<br><br>outlet connection: G 1/4 RHk x 6mm tailpiece EN 560<br><br>inlet gauge: 0 – 315/200 bar<br><br>width x height x depth: 210 x 230 x 75 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
3482 <p>acc to ISO 2503, class 20, single stage, with flowmeter for exact control of the flow in Nl/min, with high pressure compensation for constant working pressure with safety gauge acc. to ISO 5171, with shut off valveinlet pressure max: 200 bar</p><p>outlet pressure: 2,5 bar pre adjusted<br><br>flow: 1,0 – 30 Nl/min. adjustable<br><br>inlet: W 21,8x1/14 RH nut acc. to DIN 477-1, no. 6,<br><br>outlet: G 1/4 RHk x 6 mm tail-piece acc. EN 560<br><br>inlet gauge: 0 – 315/200 bar<br><br>width x height x depth:: 210 x 230 x 75 mm<br><br>With Linde-Logo stamped on body, with Linde operating manual and Linde tape<br><br><br><br>replaces article 22645589!</p>
3483 acc to DIN EN ISO 2503, class 20, single stage with flowmeter, with high pressure compensation for a constant working pressure on falling inlet pressure with safety gauge acc. to DIN ISO 5171inlet pressure max: 200 bar<br />outlet pressure: 2,5 bar fixed<br />flow: 3-30 Nl/min. Mison adjustable<br />Inlet connection: W 21,8x1/14 RH nut acc. to DIN 477-1, no. 6<br />outlet connection: G 1/4 RHk x 6mm tailpiece EN 560<br />inlet gauge: 0 – 315/200 bar<br />width x height x depth: 210 x 230 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3484 <p>5-pack #300001 packed in PE- foil bag marked with logo ´LINDE´ and Linde-item-No.</p>
3485 <p>5-pack #300004 packed in PE- foil bag marked with logo ´LINDE´ and Linde-item-No.</p>
3486 <p>5-pack #300005 packed in PE- foil bag marked with logo ´LINDE´ and Linde-item-No.</p>
3488 according to ISO 2503, class 3,single stage with high-pressure compensation, with safety gauges according to ISO 5171, including shut off valveinlet pressure max.: 300 bar<br />working pressure: 0 - 10 bar adjustable <br />flow max. 48 Nm³/h compressed air at 10 bar working pressure<br />inlet connection: W 30x2 RH acc. to DIN 477-5, no. 54<br />outlet connection: G 1/4 RH x 6 mm acc. to EN 560<br />cylinder gauge 0 - 400/300 bar<br />working gauge: 0 - 16/10 bar<br />width x height x depth: 210 x 190 x 75 mm <br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3491 acc. to ISO 2503, class3, with high pressure compensation, single stage with safety gauges acc. to DIN ISO 5171inlet pressure max:300 bar<br />outlet pressure: 0 – 10 bar adjustable<br />flow max: 48 Nm³/h at 10 bar outlet pressure<br />inlet connection: W 30x2LHk nut acc. to DIN 477-5, Nr. 57<br />outlet connection: G 3/8 LHk x 9mm tail-piece acc. to DIN EN 560<br />inlet gauge: 0 – 400 / 300 bar<br />working gauge: 0 – 16/10 bar<br />width x height x depth: 210 x 190 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3495 acc. to ISO 2503, single stage with safety gauges acc. to ISO 5171inlet pressure max:300 bar<br />outlet pressure: 10 - 100 bar adjustable<br />flow max: 380 Nm³/h at 50 bar outlet pressure <br />inlet connection: W 30x2 RH nut acc. to DIN 477-5, no. 54<br />outlet connection: W 21,8x1/14 RH male DIN 477-1, no. 6<br />inlet gauge: 0 – 400/300 bar<br />working gauge: 0 – 160/100 bar<br />width x height x depth: 170 x 140 x 180 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3497 according to ISO 2503, class 3, adiabatic compression tested, single stage with high-pressure compensation, with safety gauges according to ISO 5171, including shut off valveinlet pressure max.: 300 bar<br />working pressure: 0 - 10 bar adjustable <br />flow max. 48 Nm³/h compressed air at 10 bar working pressure<br />inlet connection: W 30x2 RH acc. to DIN 477-5, no. 59<br />outlet connection: G 1/4 RH x 6 mm acc. to EN 560<br />cylinder gauge 0 - 400/300 bar<br />working gauge: 0 - 16/10 bar<br />width x height x depth: 210 x 190 x 75 mm <br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
3499 According to DIN EN ISO 7291, single-stage design, with safety pressure gaugesDIN ISO 5171, chrome-plated lifter, hard PVC locking cone, with metal membrane,<br />Inlet pressure max: 300 bar<br />Output pressure: 0 – 10 bar adjustable<br />Output max: 90 Nm³/h compressed air at 10 bar back pressure<br />Input (rear): M 24x1.5 RHk - S16 Ü-nut<br />Output: G3/4RH x 18mm solder socket<br />Input pressure gauge: 0 – 400/300 bar<br />Output pressure gauge: 0 – 16/10 bar<br />Blow-off valve with mounted Cu pipe bend (270°, 10x1 mm)<br />Width x Height x Depth: 160 x 326 x 108 mm<br />With manufacturer's declaration, operating instructions, shrink-wrapped in food-safe foil with sticker with Linde number/oil and fat-free on cardboard, individually packed in foamed cardboard, with Linde adhesive tape, "glass fork symbol" (according to Regulation (EC) 1935/2004, Annex II) on foil and cardboard, code letter "N".<br />The pressure reducer meets the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and the LFGB and is suitable for contact with food gases.<br />Factory certificate 2.2 and test report<br />With sticker, nameplate and warning “not for oxygen”
3500 <p>free of oil- and grease, for oxygen, acc. to ISO 7291 with metal diaphragm, single stage, adiabatic compression tested acc. to ISO 7291, with safety gauges acc. to ISO 5171inlet pressure max: 300 bar</p><p>outlet pressure: 0 – 40 bar adjustable<br><br>flow max: 125 Nm³/h compr. air at 40 bar outlet pressure <br><br>inlet (on the back): M 24x1,5 RHk - S16 nut<br><br>outlet: G3/4RH x 18mm brazing connection<br><br>inlet gauge: 0 – 400/300 bar<br><br>working gauge: 0 – 60/40 bar<br><br>width x height x depth: 170 x 200 x 106 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
3501 free of oil- and grease, for oxygen, acc. to ISO 7291 with metal diaphragm, single stage, adiabatic compression tested acc. to ISO7291, with safety gauges acc. to ISO 5171inlet pressure max: 300 bar<br />outlet pressure: 15 – 40 bar adjustable<br />flow max: 250 Nm³/h compr. air at 40 bar outlet pressure <br />inlet (on the back): M 24x1,5 RHk - S16 nut<br />outlet: G3/4RH x 18mm brazing connection<br />inlet gauge: 0 – 400/300 bar<br />working gauge: 0 – 60/40 bar<br />width x height x depth: 200 x 330 x 110 mm<br />With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br />The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br />Test report and test report 2.2
3909 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.000 mminlet W30x2RH nut acc. to DIN 477-5, No. 59, with 90° angle<br />outlet M20x1,5RHk nut - 12S
3910 <p>flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.000 mminlet W30x2RH nut acc. to DIN 477-5, No. 54 inert gas/N2, with 90° angle</p><p>outlet M20x1,5RHk nut - 12S</p>
3911 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.000 mminlet W24,32x1/14RHf nut acc. to DIN 477-1, No. 10, with 90° angle<br />outlet M20x1,5RHk nut - 12S
3912 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.000 mminlet G3/4RHf nut acc. to DIN 477-1, No. 9, with 90° angle<br />outlet M20x1,5RHk nut - 12S
3913 <p>oxygen 300 baracc. to DIN 477-5 No. 595-pack #911025 in PE-foil bag</p><p>incl. test report 2.2</p>
3914 <p>inert gases and fuel gases 300 baracc. to DIN 477- 5, No. 54, 56 und 575-pack #911028 in PE-foil bag</p><p>incl. test report 2.2</p>
6947 flexible Metall hose with two anti kink springs and anti whip cable assembled complete mounted on hose, length: 1.000 mminlet W21,8x1/14RHf nut acc. to DIN 477-1, No. 6, with 90° angle<br />outlet M20x1,5RHk nut - 12S
6948 free of oil- and grease, acc. to ISO 7291, with metal diaphragm, single stage, with safety gauges acc. to ISO 5171inlet pressure max: 100 bar<br />outlet pressure: 0 – 20 bar adjustable<br />flow max: 75 Nm³/h compr. air at 20 bar outlet pressure <br />inlet: (rear): M 24x1,5 RHk - S16 nut<br />outlet: G3/4RH x 18mm brazing piece<br />relief valve with mounted copper pipe bend (270 °, 10x1 mm)<br />inlet gauge: 0 – 160/100 bar<br />working gauge: 0 – 40/20 bar<br />width x height x depth: 170 x 200 x 106 mm<br />With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "N", additional sticker on foil: "No cost-free redemption when foil is damaged "<br />The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br />Test report and test report 2.2<br />with sticker "not for oxygen use"<br /><br />Due to the cooling energy evolving from the decompression, the output of the regulator is strongly limited and does not comply with the above mentioned value indicated for the use of compressed air.<br />For continously high flow the additional use of a gas pre heater may be necessary.
6949 <p>acc to DIN EN ISO 2503, class 10, single stage, with double flowmeter for exact control of the flow in Nl/min, with high pressure compensation for constant working pressure with safety gauge acc. to ISO 5171, with shut off valveinlet pressure max: 200 bar</p><p>outlet pressure: 1,5 bar pre adjusted<br><br>flow: 2 x 2-23 Nl/min. adjustable<br><br>inlet: W 24,32x1/14 RH nut acc. to DIN 477-1, no. 1<br><br>outlet: 2x G 1/4 RHk x 6 mm tail-piece acc. EN 560<br><br>inlet gauge: 0 – 315/200 bar<br><br>width x height x depth: 250 x 230 x 130 mm<br><br>with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape</p>
6950 acc. to ISO 2503, single stage with safety gauges acc. to EN562inlet pressure max:200 bar<br />outlet pressure: 10 - 200 bar adjustable<br />flow max: 380 Nm³/h at 50 bar outlet pressure <br />inlet connection: W 24,32x1/14 RH nut acc. to DIN 477-1, no. 10<br />outlet connection: W24,32x1/14RH male acc. to DIN 477-1, no. 10<br />inlet gauge: 0 – 315/200 bar<br />working gauge: 0 – 315/200 bar<br />width x height x depth: 210 x 190 x 75 mm<br />with Linde-Logo stamped on body, with Linde operating manual and Linde adhesive tape
6952 <p>free of oil- and grease, for inert gas, fuel gas and oxygen, adiabatic compression tested,consisting of: HP double shut-off valve, with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet: M 20x1,5 RHak -12S usuage for 1 cylinder or bundles<br><br>outlet: M 24 x 1.5 RHak - 16S to connect a main pressure regulator<br><br>width x height x depth: 370 x 205 x 160 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", <br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6953 <p>free of oil- and grease, for inert gas, fuel gas and oxygen, adiabatic compression tested,consisting of:</p><p>1 HP double shut-off valve, <br><br>2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate,<br><br>inlet pressure max: 300 bar<br><br>inlets (bottom): 2 x M 20x1, 5 RHak-12S for operating 2 x 1 cylinder or bundle<br><br>outlet: M 24 x 1.5 RHak - 16S to connect a main pressure regulator<br><br>width x height x depth: 370 x 205 x 160 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", <br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6954 <p>free of oil- and grease, for inert gas, fuel gas and oxygen, consisting of:</p><p>1 distribution block with an input with sintered filter, non-return valve and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate,<br><br>inlet pressure max: 300 bar<br><br>input (bottom): M 20x1, 5 RHak-12S for operating of cylinder<br><br>outlet (left): M 20x1, 5 RHk-12S nut to connect to a manifold<br><br>outlet (right): M 20x1, 5 RHak-12S to connect to further manifold module <br><br>Width x height x depth: 315x 167 x 110 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6955 <p>free of oil- and grease, for inert gas, fuel gas and oxygen, consisting of:</p><p>1 distribution block with an input with sintered filter, non-return valve and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate,<br><br>inlet pressure max: 300 bar<br><br>input (bottom): M 20x1, 5 RHak-12S for operating of cylinder<br><br>outlet (right): M 20x1, 5 RHk-12S nut to connect to a manifold<br><br>outlet (left): M 20x1, 5 RHak-12S to connect to further manifold module <br><br>Width x height x depth: 315x 167 x 110 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6956 <p>free of oil- and grease, for inert gas, fuel gas and oxygen, consisting of:</p><p>1 distribution block with an input with sintered filter, non-return valve and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate,<br><br>inlet pressure max: 300 bar<br><br>input (bottom): M 20x1, 5 RHak-12S for operating of cylinder<br><br>outlet (right): M 20x1, 5 RHk-12S nut to connect to a manifold<br><br>outlet (left): M 20x1, 5 RHak-12S to connect to further manifold module <br><br>Width x height x depth: 915x 167 x 110 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6957 <p>free of oil- and grease, for inert gas, fuel gas and oxygen, consisting of:</p><p>1 distribution block with an input with sintered filter, non-return valve and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate,<br><br>inlet pressure max: 300 bar<br><br>input (bottom): M 20x1, 5 RHak-12S for operating of cylinder<br><br>outlet (right): M 20x1, 5 RHk-12S nut to connect to a manifold<br><br>outlet (left): M 20x1, 5 RHak-12S to connect to further manifold module <br><br>Width x height x depth: 915 x 167 x 110 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6958 <p>free of oil- and grease, for oxygen, consisting of: 2 HP shut-off valve, 2 pressure regulator H 40 acc. to ISO 7291, adiabatic compression tested acc. to ISO7291, with metal diaphragm and HP-contact gauges with inductive-contact, 2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet pressure max: 300 bar<br><br>outlet pressure: 28 bar fixed<br><br>flow max: 125 Nm³/h air at 28 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 60/40 bar<br><br>width x height x depth: 875 x 325 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6959 <p>free of oil- and grease, for oxygen,consisting of: 2 HP shut-off valve, 2 pressure regulator H20 acc to ISO 7291, single stage, adiabatic compression tested acc. to ISO7291, with metal diaphragm and HP-contact gauges with inductive-contact (NO), 1 change over block and 2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet pressure max: 300 bar<br><br>outlet pressure: 15 bar fixed<br><br>flow max: 75 Nm³/h air at 15 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 40/20 bar<br><br>width x height x depth: 875 x 325 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6960 <p>free of oil- and grease, for oxygen, consisting of: 2 HP shut-off valve, 2 pressure regulator HR 40 acc. to ISO 7291, adiabatic compression tested acc. to ISO7291, with metal diaphragm and HP-contact gauges with inductive-contact, 2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet pressure max: 300 bar<br><br>outlet pressure: 28 bar fixed<br><br>flow max: 250 Nm³/h air at 28 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 60/40 bar<br><br>width x height x depth: 875 x 325 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6963 <p>free of oil- and grease, for nitrogen and compressed air,consisting of: 2 HP shut-off valve, 2 pressure regulator H40 acc. to ISO 7291, single stage, with metal diaphragm and HP-contact gauges with inductive-contact (NO), 2 solenoid valves 230VAC, 1 double non return valve and 2 distribution blocks, each with an input with sintered filter, non-return valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet pressure max: 300 bar<br><br>outlet pressure: 40 bar fixed<br><br>flow max: 125 Nm³/h air at 40 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 60/40 bar<br><br>width x height x depth: 1.095 x 325 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "N", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2<br><br>With sticker "Not for oxygen use"</p>
6968 <p>free of oil- and grease, for oxygen use, consisting of: 2 HP shut-off valve, 2 pressure regulator HR40 acc. to ISO 7291, adiabatic compression tested acc. to ISO 7291 single stage, with metal diaphragm and HP-contact gauges with inductive-contact (NO), 2 solenoid valves 230VAC, 1 double non return valve and 2 distribution blocks, each with an input with sintered filter, non-return valve, connection for a safety valve, purge valve and high-pressure gauge and connection for a cylinder/bundle manifold module, completely mounted on stainless steel base plate</p><p>inlet pressure max: 300 bar<br><br>outlet pressure: 25 bar fixed<br><br>flow max: 250 Nm³/h air at 40 bar outlet pressure <br><br>inlet: 2 x M 20x1,5 RHak -12S usuage for 2x1 cylinders or bundles<br><br>outlet: G 3/4 RH x 18 mm soldered bush<br><br>inlet gauge: 0 – 400/300 bar<br><br>outlet gauge: 0 – 60/40 bar<br><br>width x height x depth: 1095 x 325 x 195 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>
6969 <p>to pre heat the gas in the high pressure area,consisting of:</p><p>gas preheater GPH 200, PN 300, heating power 200 W, protection class housing: IP65, plug: IP44, supply voltage 230V/ 50 Hz, complete with electric cable 2m and plug, <br><br>inlet M20x1, 5RHak - 12S<br><br>outlet M20x1, 5RHk nut 12S<br><br>completely assembled on a base plate made of stainless steel<br><br>width x height x depth: 305 x 167 x 130 mm<br><br>With manufacturer's declaration, instruction manual, in food grade shrink wrap with sticker with Linde number / free of oil- and grease on box, individually wrapped in foam-lined box, with linde tape, "Glass-fork" symbol (according to Regulation (EC) 1935/2004, Annex II) on foil and box, code letter "O", additional sticker on foil: "No cost-free redemption when foil is damaged "<br><br>The regulator fulfills the requirements of Regulation (EC) 1935/2004, Regulation (EC) 2023/2006 and LFGB and is approved for contact with food suitable gases.<br><br>Test report and test report 2.2</p>