Result
| product_id |
short_description |
full_description |
meta_keywords |
meta_description |
search_words |
promo_text |
| 1141 |
|
EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4" |
|
|
|
|
| 1142 |
|
EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4" |
|
|
|
|
| 2207 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 2208 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 2209 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 2210 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 2211 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 2212 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 2213 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 2214 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 2215 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 2216 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 3681 |
|
EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4" |
|
|
|
|
| 3682 |
|
EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4" |
|
|
|
|
| 3683 |
|
EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4" |
|
|
|
|
| 3684 |
|
EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4" |
|
|
|
|
| 3685 |
|
EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4" |
|
|
|
|
| 4890 |
|
EH40-35MM Nitrogen 5.0 tapping point pressure reducer, 0.5 - 35 bar, with metal diaphragm for gas purity 5.0, and safety gauge according to ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 35 bar, adjustable. Maximum output: 230 Nm³/h air at 35 bar outlet pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 60/40 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: for pure gases up to gas purity 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberOutlet connection 1135303505 G1/2 RHak according to EN 560 1135303505-812 Hose nozzle G3/8" RHk x 9mm 1135303505-800 External thread G1/4" RHk according to EN560 1135303505-870 External thread G3/8" RHk according to EN 560 1135303505-838 External thread G1/2" RHk according to EN 560 1135303505-6M Compression fitting VA 6mm 1135303505-8M Compression fitting VA 8mm 1135303505-10M Compression fitting VA 10mm 1135303505-12M Compression fitting VA 12mm 1135303505-2 Compression fitting VA 1/8" 1135303505-4 Compression fitting VA 1/4" |
|
|
|
|
| 5808 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 5809 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 5810 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 5811 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 5812 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|
| 5813 |
|
Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4" |
|
|
|
|