Result
| product_id |
short_description |
full_description |
meta_keywords |
meta_description |
search_words |
promo_text |
| 324 |
|
<p>Vulkan L10 line pressure reducer for compressed air G1/2RH both sides, 0-10 bar, based on ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0-10 bar, adjustable. Maximum output: 45 Nm³/h at 10 bar outlet pressure. Inlet: G1/2RHak according to EN 560. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-40/20 bar. Outlet pressure gauge: 0-16/10 bar. Width x Height x Depth: 210 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (Surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order numberGas purity/membraneInlet/outlet screw connection 107529 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107529-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107529-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107529-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107529-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107529-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107529-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107529-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107529-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107529-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107529-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107529-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107529-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107529-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
| 331 |
|
<p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
| 338 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
| 3112 |
|
Line dome pressure reducer Vulkan LD1 MD inert gases G1RHi both sides. 0.5 - 99 bar not for carbon dioxide, material: brass / Viton<br />Standards & Design:<br /><br />single-stage design, maximum inlet pressure: 100 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 100 bar, output pressure: 0<br />• outlet pressure, input: internal thread G1RHi, output: internal thread G1RHi, input pressure gauge: without, output pressure gauge: without, width x height x depth: 130 x 170 x 130 mm<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 130 x 170 x 130 mm |
|
|
|
|
| 3126 |
|
Vulkan LH120 line pressure reducer for fuel gases G1RHi, both sides, 0 - 50 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 300 Nm³/h at 50 bar outlet pressure<br />• Inlet: internal thread G1RHi<br />• Outlet: internal thread G1RHi<br /><br />Dimensions:<br /><br />Width x Height x Depth: 132 x 295 x 132 mm |
|
|
|
|
| 3134 |
|
Vulkan LH 119-1 nitrogen line pressure reducer, G 1/2 if both sides, 0.2 - 1.8 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauge according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 21 bar<br />• outlet pressure<br />• output: 150 Nm³/h compressed air at 1<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 175 x 90 mm |
|
|
|
|
| 3932 |
|
<p>In-line dome pressure reducer Vulkan LD1 MD both sides G1RHi 0.5 - 99 bar single-stage design, without pressure gauge. Maximum inlet pressure: 25 bar. Output pressure: 0.1 - 24 bar adjustable. Maximum output: 700 Nm³/h at 12 bar outlet pressure. Inlet and outlet: G 1 RHi. Width x height x depth: 130 x 170 x 130 mm. Available for various gas types (please select in the selection window!): Oxygen: Item No. 108536. CO2 / Argon: Item No. 106536. Helium: Item No. 10653626. Nitrogen: Item No. 103536. Hydrogen: Item No. 104536. Compressed air: Item No. 107536</p> |
|
|
|
|
| 4177 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
| 6704 |
|
<p>Vulkan L15 line pressure reducer for fuel gases G1/2RH, 0 - 1.5 bar<br>Standards & Design:<br><br>single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 20 bar, output pressure: 0 to 1<br>according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br><br>Technical data:<br><br>• maximum inlet pressure: 20 bar, output pressure: 0 to 1<br>• outlet pressure, input: external thread G1/2RH according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br>• output pressure: 0 to 1<br><br>Dimensions:<br><br>width x height x depth: 200 x 200 x 75 mm</p> |
|
|
|
|
| 6705 |
|
Vulkan L15 line pressure reducer for fuel gases G1/2RH, 0 - 1.5 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 20 bar, output pressure: 0 to 1<br />according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br /><br />Technical data:<br /><br />• maximum inlet pressure: 20 bar, output pressure: 0 to 1<br />• outlet pressure, input: external thread G1/2RH according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br />• output pressure: 0 to 1<br /><br />Dimensions:<br /><br />width x height x depth: 200 x 200 x 75 mm |
|
|
|
|
| 6709 |
|
Vulkan L15 line pressure reducer for fuel gases G1/2RH, 0 - 1.5 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 20 bar, output pressure: 0 to 1<br />according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br /><br />Technical data:<br /><br />• maximum inlet pressure: 20 bar, output pressure: 0 to 1<br />• outlet pressure, input: external thread G1/2RH according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br />• output pressure: 0 to 1<br /><br />Dimensions:<br /><br />width x height x depth: 200 x 200 x 75 mm |
|
|
|
|