SELECT 
  cscart_product_descriptions.product_id, 
  cscart_product_descriptions.short_description, 
  IF(
    cscart_product_descriptions.short_description = '' 
    OR cscart_product_descriptions.short_description IS NULL, 
    cscart_product_descriptions.full_description, 
    ''
  ) AS full_description, 
  cscart_product_descriptions.meta_keywords, 
  cscart_product_descriptions.meta_description, 
  cscart_product_descriptions.search_words, 
  cscart_product_descriptions.promo_text, 
  cscart_product_descriptions.unit_name 
FROM 
  cscart_product_descriptions 
WHERE 
  cscart_product_descriptions.product_id IN (
    79, 80, 81, 82, 140, 141, 142, 143, 144, 
    145, 146, 161, 162, 163, 164, 165, 166, 
    167, 243, 244, 245, 246, 247, 248, 249, 
    297, 298, 299, 300, 301, 302, 3525, 3526, 
    3527, 3528, 3529, 3530, 3531, 3940, 
    3941, 3942, 3943, 3944, 3945, 3946, 
    3985, 3986, 3987, 3988, 3989, 3990, 
    3991, 4045, 4046, 4047, 4048, 4049, 
    4050, 4051, 4128, 4129, 4130, 4131, 
    4132, 4133, 4134, 4181, 4182, 4183, 
    4184, 4185, 4186, 4187, 26, 27, 28, 72, 
    73, 74, 75, 133, 134, 135, 136, 137, 138, 
    139, 240, 241, 242, 293, 294, 295, 296, 
    3520, 3521
  ) 
  AND cscart_product_descriptions.lang_code = 'en'

Query time 0.00148

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "115.60"
    },
    "table": {
      "table_name": "cscart_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code"
      ],
      "key_length": "9",
      "rows_examined_per_scan": 96,
      "rows_produced_per_join": 96,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_product_descriptions`.`product_id` in (79,80,81,82,140,141,142,143,144,145,146,161,162,163,164,165,166,167,243,244,245,246,247,248,249,297,298,299,300,301,302,3525,3526,3527,3528,3529,3530,3531,3940,3941,3942,3943,3944,3945,3946,3985,3986,3987,3988,3989,3990,3991,4045,4046,4047,4048,4049,4050,4051,4128,4129,4130,4131,4132,4133,4134,4181,4182,4183,4184,4185,4186,4187,26,27,28,72,73,74,75,133,134,135,136,137,138,139,240,241,242,293,294,295,296,3520,3521)) and (`gaseus`.`cscart_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "106.01",
        "eval_cost": "9.60",
        "prefix_cost": "115.61",
        "data_read_per_join": "438K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text",
        "unit_name"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text unit_name
26 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
27 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
28 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
72 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
73 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
74 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
75 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
79 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
80 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
81 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
82 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
133 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
134 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
135 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
136 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
137 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
138 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
139 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
140 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
141 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
142 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
143 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
144 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
145 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
146 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
161 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
162 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
163 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
164 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
165 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
166 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
167 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
240 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
241 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
242 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
243 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
244 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
245 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
246 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
247 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
248 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
249 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
293 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
294 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
295 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
296 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
297 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
298 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
299 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
300 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
301 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
302 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3520 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
3521 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
3525 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3526 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3527 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3528 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3529 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3530 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3531 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3940 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3941 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3942 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3943 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3944 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3945 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3946 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3985 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3986 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3987 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3988 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3989 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3990 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3991 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4045 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4046 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4047 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4048 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4049 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4050 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4051 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4128 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4129 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4130 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4131 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4132 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4133 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4134 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4181 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4182 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4183 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4184 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4185 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4186 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4187 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm