SELECT 
  cscart_ult_product_descriptions.product_id, 
  cscart_ult_product_descriptions.short_description, 
  IF(
    cscart_ult_product_descriptions.short_description = "", 
    cscart_ult_product_descriptions.full_description, 
    ""
  ) AS full_description, 
  cscart_ult_product_descriptions.meta_keywords, 
  cscart_ult_product_descriptions.meta_description, 
  cscart_ult_product_descriptions.search_words, 
  cscart_ult_product_descriptions.promo_text 
FROM 
  cscart_ult_product_descriptions 
WHERE 
  cscart_ult_product_descriptions.product_id IN (
    4197, 4198, 4199, 4200, 4201, 6716, 6715, 
    3117, 3119, 3127, 3133, 3141, 3142, 
    6674, 6680, 6692, 6693, 6701, 6707, 
    1417, 1393, 1394, 1395, 1396, 1397, 
    1398, 1399, 1400, 1401, 1402, 1403, 
    1404, 1405, 1406, 1407, 1408, 1409, 
    1410, 1411, 1412, 1413, 1414, 1415, 
    1416, 5107, 5108, 5109, 5110, 5111, 
    5112, 5113, 5114, 5115, 5116, 5117, 
    5118, 5119, 5120, 5121, 5122, 5123, 
    5124, 5125, 5126, 5127, 5128, 5129, 
    5130, 340, 341, 342, 343, 344, 345, 346, 
    412, 413, 414, 1366, 1367, 1368, 1369, 
    1370, 1371, 1372, 1373, 1374, 1375, 
    1376, 1377, 1378, 1379, 1380, 1381, 
    1382, 1383
  ) 
  AND cscart_ult_product_descriptions.company_id = 1 
  AND cscart_ult_product_descriptions.lang_code = 'en'

Query time 0.00213

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "75.71"
    },
    "table": {
      "table_name": "cscart_ult_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id",
        "company_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code",
        "company_id"
      ],
      "key_length": "13",
      "rows_examined_per_scan": 96,
      "rows_produced_per_join": 96,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_ult_product_descriptions`.`company_id` = 1) and (`gaseus`.`cscart_ult_product_descriptions`.`product_id` in (4197,4198,4199,4200,4201,6716,6715,3117,3119,3127,3133,3141,3142,6674,6680,6692,6693,6701,6707,1417,1393,1394,1395,1396,1397,1398,1399,1400,1401,1402,1403,1404,1405,1406,1407,1408,1409,1410,1411,1412,1413,1414,1415,1416,5107,5108,5109,5110,5111,5112,5113,5114,5115,5116,5117,5118,5119,5120,5121,5122,5123,5124,5125,5126,5127,5128,5129,5130,340,341,342,343,344,345,346,412,413,414,1366,1367,1368,1369,1370,1371,1372,1373,1374,1375,1376,1377,1378,1379,1380,1381,1382,1383)) and (`gaseus`.`cscart_ult_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "66.11",
        "eval_cost": "9.60",
        "prefix_cost": "75.71",
        "data_read_per_join": "366K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "company_id",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text
340 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
341 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
342 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
343 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
344 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
345 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
346 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
412 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
413 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
414 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1366 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1367 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1368 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1369 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1370 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1371 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1372 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1373 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1374 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1375 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1376 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1377 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1378 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1379 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1380 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1381 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1382 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1383 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1393 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
1394 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1395 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1396 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1397 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1398 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1399 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1400 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1401 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1402 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1403 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1404 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1405 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1406 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1407 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1408 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1409 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1410 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1411 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1412 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1413 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1414 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1415 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1416 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1417 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
3117 Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm
3119 Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm
3127 Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm
3133 Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm
3141 Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm
3142 Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm
4197 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4198 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4199 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4200 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4201 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
5107 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5108 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5109 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5110 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5111 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5112 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5113 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5114 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5115 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5116 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5117 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5118 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5119 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5120 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5121 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5122 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5123 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5124 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5125 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5126 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5127 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5128 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5129 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5130 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
6674 Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm
6680 Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm
6692 Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm
6693 Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm
6701 Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm
6707 Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm
6715 Tapping Points: Pressure Reducer Vulkan E10F Flowmeter LabLine Forming Gas 34 Nl/min. Completely chrome-plated with metal diaphragms for gas purity 5.0, based on ISO 2503<br />Standards & Design:<br /><br />Class 20<br />single-stage design, with flowmeter for monitoring the exact flow rate in Nl/min<br />according to DIN EN 560<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 20 bar<br />• Output pressure: 4<br />• Inlet: G 3/8 LHk U-nut according to DIN EN 560<br />• Outlet: 6mm double clamp ring, stainless steel<br /><br />Dimensions:<br /><br />Width x Height x Depth: 120 x 210 x 65 mm
6716 Tapping Points: Pressure Reducer Vulkan E10F Flowmeter LabLine Forming Gas 34 Nl/min. Completely chrome-plated with metal diaphragms for gas purity 5.0, based on ISO 2503<br />Standards & Design:<br /><br />Class 20<br />single-stage design, with flowmeter for monitoring the exact flow rate in Nl/min<br />according to DIN EN 560<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 20 bar<br />• Output pressure: 4<br />• Inlet: G 3/8 LHk U-nut according to DIN EN 560<br />• Outlet: 6mm double clamp ring, stainless steel<br /><br />Dimensions:<br /><br />Width x Height x Depth: 120 x 210 x 65 mm