SELECT 
  cscart_ult_product_descriptions.product_id, 
  cscart_ult_product_descriptions.short_description, 
  IF(
    cscart_ult_product_descriptions.short_description = "", 
    cscart_ult_product_descriptions.full_description, 
    ""
  ) AS full_description, 
  cscart_ult_product_descriptions.meta_keywords, 
  cscart_ult_product_descriptions.meta_description, 
  cscart_ult_product_descriptions.search_words, 
  cscart_ult_product_descriptions.promo_text 
FROM 
  cscart_ult_product_descriptions 
WHERE 
  cscart_ult_product_descriptions.product_id IN (
    2176, 2177, 2178, 2179, 2180, 2181, 2182, 
    2183, 2184, 3779, 3780, 3781, 3782, 
    3783, 3784, 3785, 3786, 3787, 3788, 
    3789, 3790, 3791, 3792, 3793
  ) 
  AND cscart_ult_product_descriptions.company_id = 1 
  AND cscart_ult_product_descriptions.lang_code = 'en'

Query time 0.00078

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "18.94"
    },
    "table": {
      "table_name": "cscart_ult_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id",
        "company_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code",
        "company_id"
      ],
      "key_length": "13",
      "rows_examined_per_scan": 24,
      "rows_produced_per_join": 24,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_ult_product_descriptions`.`company_id` = 1) and (`gaseus`.`cscart_ult_product_descriptions`.`product_id` in (2176,2177,2178,2179,2180,2181,2182,2183,2184,3779,3780,3781,3782,3783,3784,3785,3786,3787,3788,3789,3790,3791,3792,3793)) and (`gaseus`.`cscart_ult_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "16.54",
        "eval_cost": "2.40",
        "prefix_cost": "18.94",
        "data_read_per_join": "91K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "company_id",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text
2176 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2177 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2178 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2179 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2180 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2181 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2182 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2183 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2184 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3779 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3780 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3781 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3782 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3783 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3784 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3785 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3786 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3787 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3788 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3789 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3790 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3791 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3792 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3793 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"