Result
| product_id |
short_description |
full_description |
meta_keywords |
meta_description |
search_words |
promo_text |
unit_name |
| 1573 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1574 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1575 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1576 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1577 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1578 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1579 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1580 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1581 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1582 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1583 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1584 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1585 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1586 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1587 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1588 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1589 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1590 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1591 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1592 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1593 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1594 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1595 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1596 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1597 |
|
Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm |
|
|
|
|
|
| 1626 |
|
Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm |
|
|
|
|
|
| 2281 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2282 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2283 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2284 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2285 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2331 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2332 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2333 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2334 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2335 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2403 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2404 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2405 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2406 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2407 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2408 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2409 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2410 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2411 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2595 |
|
Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm |
|
|
|
|
|
| 2596 |
|
Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm |
|
|
|
|
|
| 2597 |
|
Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm |
|
|
|
|
|
| 2598 |
|
Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm |
|
|
|
|
|
| 2599 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2600 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2601 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2602 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 2726 |
|
Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm |
|
|
|
|
|
| 2727 |
|
Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm |
|
|
|
|
|
| 2728 |
|
Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm |
|
|
|
|
|
| 2729 |
|
Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm |
|
|
|
|
|
| 2730 |
|
Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm |
|
|
|
|
|
| 2731 |
|
Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm |
|
|
|
|
|
| 2732 |
|
Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm |
|
|
|
|
|
| 2733 |
|
Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm |
|
|
|
|
|
| 2734 |
|
Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm |
|
|
|
|
|
| 5881 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 5882 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 5883 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 5884 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 5931 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 5932 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 5933 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 5934 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 6003 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 6004 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 6005 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 6006 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 6007 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 6008 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 6009 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 6010 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 6011 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 6187 |
|
Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm |
|
|
|
|
|
| 6188 |
|
Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm |
|
|
|
|
|
| 6189 |
|
Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm |
|
|
|
|
|
| 6190 |
|
Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm |
|
|
|
|
|
| 6192 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 6193 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 6194 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 6195 |
|
Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm |
|
|
|
|
|
| 6313 |
|
Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm |
|
|
|
|
|
| 6314 |
|
Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm |
|
|
|
|
|
| 6315 |
|
Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm |
|
|
|
|
|
| 6316 |
|
Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm |
|
|
|
|
|
| 6317 |
|
Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm |
|
|
|
|
|
| 6318 |
|
Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm |
|
|
|
|
|
| 6319 |
|
Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm |
|
|
|
|
|
| 6320 |
|
Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm |
|
|
|
|
|
| 6321 |
|
Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm |
|
|
|
|
|