SELECT 
  cscart_ult_product_descriptions.product_id, 
  cscart_ult_product_descriptions.short_description, 
  IF(
    cscart_ult_product_descriptions.short_description = "", 
    cscart_ult_product_descriptions.full_description, 
    ""
  ) AS full_description, 
  cscart_ult_product_descriptions.meta_keywords, 
  cscart_ult_product_descriptions.meta_description, 
  cscart_ult_product_descriptions.search_words, 
  cscart_ult_product_descriptions.promo_text 
FROM 
  cscart_ult_product_descriptions 
WHERE 
  cscart_ult_product_descriptions.product_id IN (
    1626, 2281, 2282, 2283, 2284, 2285, 2331, 
    2332, 2333, 2334, 2335, 2403, 2404, 
    2405, 2406, 2407, 2408, 2409, 2410, 
    2411, 2599, 2600, 2601, 2602, 5881, 
    5882, 5883, 5884, 5931, 5932, 5933, 
    5934, 6003, 6004, 6005, 6006, 6007, 
    6008, 6009, 6010, 6011, 6192, 6193, 
    6194, 6195, 2595, 2596, 2597, 2598, 
    6187, 6188, 6189, 6190, 2730, 2731, 
    2732, 2733, 2734, 6318, 6319, 6320, 
    6321, 2726, 2727, 2728, 2729, 6313, 
    6314, 6315, 6316, 6317, 1573, 1574, 
    1575, 1576, 1577, 1578, 1579, 1580, 
    1581, 1582, 1583, 1584, 1585, 1586, 
    1587, 1588, 1589, 1590, 1591, 1592, 
    1593, 1594, 1595, 1596, 1597
  ) 
  AND cscart_ult_product_descriptions.company_id = 1 
  AND cscart_ult_product_descriptions.lang_code = 'en'

Query time 0.00163

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "75.71"
    },
    "table": {
      "table_name": "cscart_ult_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id",
        "company_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code",
        "company_id"
      ],
      "key_length": "13",
      "rows_examined_per_scan": 96,
      "rows_produced_per_join": 96,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_ult_product_descriptions`.`company_id` = 1) and (`gaseus`.`cscart_ult_product_descriptions`.`product_id` in (1626,2281,2282,2283,2284,2285,2331,2332,2333,2334,2335,2403,2404,2405,2406,2407,2408,2409,2410,2411,2599,2600,2601,2602,5881,5882,5883,5884,5931,5932,5933,5934,6003,6004,6005,6006,6007,6008,6009,6010,6011,6192,6193,6194,6195,2595,2596,2597,2598,6187,6188,6189,6190,2730,2731,2732,2733,2734,6318,6319,6320,6321,2726,2727,2728,2729,6313,6314,6315,6316,6317,1573,1574,1575,1576,1577,1578,1579,1580,1581,1582,1583,1584,1585,1586,1587,1588,1589,1590,1591,1592,1593,1594,1595,1596,1597)) and (`gaseus`.`cscart_ult_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "66.11",
        "eval_cost": "9.60",
        "prefix_cost": "75.71",
        "data_read_per_join": "366K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "company_id",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text
1573 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1574 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1575 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1576 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1577 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1578 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1579 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1580 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1581 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1582 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1583 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1584 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1585 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1586 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1587 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1588 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1589 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1590 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1591 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1592 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1593 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1594 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1595 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1596 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1597 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1626 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
2281 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2282 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2283 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2284 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2285 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2331 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2332 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2333 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2334 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2335 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2403 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2404 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2405 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2406 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2407 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2408 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2409 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2410 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2411 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2595 Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm
2596 Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm
2597 Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm
2598 Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm
2599 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2600 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2601 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2602 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
2726 Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm
2727 Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm
2728 Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm
2729 Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm
2730 Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm
2731 Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm
2732 Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm
2733 Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm
2734 Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm
5881 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
5882 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
5883 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
5884 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
5931 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
5932 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
5933 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
5934 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
6003 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
6004 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
6005 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
6006 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
6007 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
6008 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
6009 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
6010 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
6011 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
6187 Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm
6188 Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm
6189 Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm
6190 Vulkan LHR 300/200 nitrogen cylinder pressure reducer DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 200 bar adjustable. Maximum output: 380 Nm³/h compressed air at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303770 G1/2RHak according to EN 560 303770-800 External thread G1/4" RHk according to EN560 303770-870 External thread G3/8" RHk according to EN 560 303770-6M Compression fitting VA 6mm 303770-8M Compression fitting VA 8mm 303770-10M Compression fitting VA 10mm 303770-12M Compression fitting VA 12mm 303770-15M Compression fitting VA 15mm 303770-18M compression fitting VA 18mm
6192 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
6193 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
6194 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
6195 Vulkan LHR 300/100 BSP nitrogen cylinder pressure reducer DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 303760 G1/2RHak according to EN 560 303760-800 External thread G1/4" RHk according to EN560 303760-870 External thread G3/8" RHk according to EN 560 303760-6M Compression fitting VA 6mm 303760-8M Compression fitting VA 8mm 303760-10M Compression fitting VA 10mm 303760-12M Compression fitting VA 12mm 303760-15M Compression fitting VA 15mm 303760-18M compression fitting VA 18mm
6313 Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm
6314 Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm
6315 Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm
6316 Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm
6317 Vulkan LHR 200/200 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G3/4 RHf U-nut according to DIN 477-1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208770 G1/2RHak according to EN 560 208770-800 External thread G1/4" RHk according to EN560 208770-870 External thread G3/8" RHk according to EN 560 208770-6M Compression fitting VA 6mm 208770-8M Compression fitting VA 8mm 208770-10M Compression fitting VA 10mm 208770-12M Compression fitting VA 12mm 208770-15M Compression fitting VA 15mm 208770-18M Compression fitting VA 18mm
6318 Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm
6319 Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm
6320 Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm
6321 Vulkan LHR 200/100 BSP oxygen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure. Inlet: G3/4 RHf U-nut according to DIN 477 Part 1. Outlet: G3/8 RHif. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208760 G1/2RHak according to EN 560 208760-800 External thread G1/4" RHk according to EN560 208760-870 External thread G3/8" RHk according to EN 560 208760-6M Compression fitting VA 6mm 208760-8M Compression fitting VA 8mm 208760-10M Compression fitting VA 10mm 208760-12M Compression fitting VA 12mm 208760-15M Compression fitting VA 15mm 208760-18M Compression fitting VA 18mm