Result
| product_id |
short_description |
full_description |
meta_keywords |
meta_description |
search_words |
promo_text |
| 12 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
| 13 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
| 14 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
| 15 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
| 16 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
| 17 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
| 18 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
| 65 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
| 66 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
| 67 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
| 317 |
|
Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm |
|
|
|
|
| 3098 |
|
Vulkan LHR3 nitrogen line pressure reducer G 2RHi, 0.3 - 3.0 bar<br />Standards & Design:<br /><br />single-stage design, without pressure gauge<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 6 bar<br />• outlet pressure<br />• Output pressure: 0<br /><br />Dimensions:<br /><br />Width x Height x Depth: 240 x 300 x 240 mm |
|
|
|
|
| 3115 |
|
Vulkan LHR3 nitrogen line pressure reducer G 2RHi, 0.3 - 3.0 bar<br />Standards & Design:<br /><br />single-stage design, without pressure gauge<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 6 bar<br />• outlet pressure<br />• Output pressure: 0<br /><br />Dimensions:<br /><br />Width x Height x Depth: 240 x 300 x 240 mm |
|
|
|
|
| 3121 |
|
Vulkan LH 119-1 nitrogen line pressure reducer, G 1/2 if both sides, 0.2 - 1.8 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauge according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 21 bar<br />• outlet pressure<br />• output: 150 Nm³/h compressed air at 1<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 175 x 90 mm |
|
|
|
|
| 3128 |
|
Vulkan LH 119-1 nitrogen line pressure reducer, G 1/2 if both sides, 0.2 - 1.8 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauge according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 21 bar<br />• outlet pressure<br />• output: 150 Nm³/h compressed air at 1<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 175 x 90 mm |
|
|
|
|
| 3129 |
|
Vulkan LR60 nitrogen ribbed pressure reducer G3/4RH, external on both sides<br />Standards & Design:<br /><br />Single-stage design, with safety pressure gauges according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 100 bar<br />• outlet pressure<br />• Output pressure: 15 - 60 bar adjustable<br />• Inlet: external thread G3/4RHak, Outlet: external thread G3/4RHak<br />• Outlet: external thread G3/4RHak<br />• Inlet pressure gauge: 0 - 160/100 bar<br />• Outlet pressure gauge: 0 - 100/60 bar<br /><br />Dimensions:<br /><br />Width x Height x Depth: 215 x 330 x 85 mm |
|
|
|
|
| 3130 |
|
Vulkan LR40 nitrogen ribbed line pressure reducer G3/4RHak, 15-40 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 100 bar, output pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar outlet pressure and 81 bar inlet pressure, input: external thread G3/4RHak, output: external thread G3/4RHak, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 215 x 330 x 85 mm<br /><br />Technical data:<br /><br />• maximum inlet pressure: 100 bar, output pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar outlet pressure and 81 bar inlet pressure, input: external thread G3/4RHak, output: external thread G3/4RHak, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 215 x 330 x 85 mm<br />• outlet pressure and 81 bar inlet pressure, input: external thread G3/4RHak, output: external thread G3/4RHak, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 215 x 330 x 85 mm<br />• output pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar outlet pressure and 81 bar inlet pressure, input: external thread G3/4RHak, output: external thread G3/4RHak, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 215 x 330 x 85 mm<br /><br />Dimensions:<br /><br />width x height x depth: 215 x 330 x 85 mm |
|
|
|
|
| 3132 |
|
Vulkan LHR3 nitrogen line pressure reducer G 2RHi, 0.3 - 3.0 bar<br />Standards & Design:<br /><br />single-stage design, without pressure gauge<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 6 bar<br />• outlet pressure<br />• Output pressure: 0<br /><br />Dimensions:<br /><br />Width x Height x Depth: 240 x 300 x 240 mm |
|
|
|
|
| 3143 |
|
Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm |
|
|
|
|
| 3939 |
|
Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting |
|
|
|
|
| 6681 |
|
Vulkan LH 119-1 nitrogen line pressure reducer, G 1/2 if both sides, 0.2 - 1.8 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauge according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 21 bar<br />• outlet pressure<br />• output: 150 Nm³/h compressed air at 1<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 175 x 90 mm |
|
|
|
|
| 6690 |
|
Vulkan LHR3 nitrogen line pressure reducer G 2RHi, 0.3 - 3.0 bar<br />Standards & Design:<br /><br />single-stage design, without pressure gauge<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 6 bar<br />• outlet pressure<br />• Output pressure: 0<br /><br />Dimensions:<br /><br />Width x Height x Depth: 240 x 300 x 240 mm |
|
|
|
|
| 6695 |
|
Vulkan LH 119-1 nitrogen line pressure reducer, G 1/2 if both sides, 0.2 - 1.8 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauge according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 21 bar<br />• outlet pressure<br />• output: 150 Nm³/h compressed air at 1<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 175 x 90 mm |
|
|
|
|
| 6700 |
|
Vulkan LHR3 nitrogen line pressure reducer G 2RHi, 0.3 - 3.0 bar<br />Standards & Design:<br /><br />single-stage design, without pressure gauge<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 6 bar<br />• outlet pressure<br />• Output pressure: 0<br /><br />Dimensions:<br /><br />Width x Height x Depth: 240 x 300 x 240 mm |
|
|
|
|