SELECT 
  cscart_product_descriptions.product_id, 
  cscart_product_descriptions.short_description, 
  IF(
    cscart_product_descriptions.short_description = '' 
    OR cscart_product_descriptions.short_description IS NULL, 
    cscart_product_descriptions.full_description, 
    ''
  ) AS full_description, 
  cscart_product_descriptions.meta_keywords, 
  cscart_product_descriptions.meta_description, 
  cscart_product_descriptions.search_words, 
  cscart_product_descriptions.promo_text, 
  cscart_product_descriptions.unit_name 
FROM 
  cscart_product_descriptions 
WHERE 
  cscart_product_descriptions.product_id IN (
    1598, 5272, 5273, 5274, 5275, 5276, 5277, 
    5278, 5279, 5280, 5281, 5282, 5283, 
    5284, 5285, 5286, 5287, 5288, 5289, 
    5290, 5291, 5292, 5293, 5294, 5295, 
    5296, 5297, 5298, 1546, 1547, 1548, 
    1549, 1550, 1551, 1552, 1553, 1554, 
    1555, 1556, 1557, 1558, 1559, 1560, 
    1561, 1562, 1563, 1564, 1565, 1566, 
    1567, 1568, 1569, 1570, 1571, 5245, 
    5246, 5247, 5248, 5249, 5250, 5251, 
    5252, 5253, 5254, 5255, 5256, 5257, 
    5258, 5259, 5260, 5261, 5262, 5263, 
    5264, 5265, 5266, 5267, 5268, 5269, 
    5270, 5271, 1600, 1601, 1602, 1603, 
    1604, 1605, 1606, 1607, 1608, 1609, 
    1610, 1611, 1612, 1613, 1614
  ) 
  AND cscart_product_descriptions.lang_code = 'en'

Query time 0.00143

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "115.60"
    },
    "table": {
      "table_name": "cscart_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code"
      ],
      "key_length": "9",
      "rows_examined_per_scan": 96,
      "rows_produced_per_join": 96,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_product_descriptions`.`product_id` in (1598,5272,5273,5274,5275,5276,5277,5278,5279,5280,5281,5282,5283,5284,5285,5286,5287,5288,5289,5290,5291,5292,5293,5294,5295,5296,5297,5298,1546,1547,1548,1549,1550,1551,1552,1553,1554,1555,1556,1557,1558,1559,1560,1561,1562,1563,1564,1565,1566,1567,1568,1569,1570,1571,5245,5246,5247,5248,5249,5250,5251,5252,5253,5254,5255,5256,5257,5258,5259,5260,5261,5262,5263,5264,5265,5266,5267,5268,5269,5270,5271,1600,1601,1602,1603,1604,1605,1606,1607,1608,1609,1610,1611,1612,1613,1614)) and (`gaseus`.`cscart_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "106.01",
        "eval_cost": "9.60",
        "prefix_cost": "115.61",
        "data_read_per_join": "438K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text",
        "unit_name"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text unit_name
1546 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1547 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1548 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1549 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1550 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1551 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1552 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1553 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1554 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1555 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1556 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1557 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1558 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1559 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1560 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1561 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1562 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1563 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1564 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1565 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1566 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1567 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1568 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1569 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1570 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1571 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
1598 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
1600 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1601 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1602 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1603 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1604 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1605 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1606 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1607 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1608 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1609 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1610 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1611 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1612 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1613 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1614 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5245 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5246 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5247 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5248 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5249 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5250 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5251 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5252 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5253 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5254 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5255 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5256 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5257 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5258 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5259 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5260 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5261 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5262 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5263 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5264 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5265 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5266 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5267 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5268 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5269 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5270 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5271 Vulkan LHR 300/100 DIN oxygen cylinder pressure regulator DIN 477-5, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar inlet pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5. Outlet: G 3/4 RHaf according to DIN 477 Part 1. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. Important note for 300 bar pressure regulators - please check. Your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308765 G1/2RHak according to EN 560 308765-800 External thread G1/4" RHk according to EN560 308765-870 External thread G3/8" RHk according to EN 560 308765-6M Compression fitting VA 6mm 308765-8M Compression fitting VA 8mm 308765-10M Compression fitting VA 10mm 308765-12M Compression fitting VA 12mm 308765-15M Compression fitting VA 15mm 308765-18M compression fitting VA 18mm
5272 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5273 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5274 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5275 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5276 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5277 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5278 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5279 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5280 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5281 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5282 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5283 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5284 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5285 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5286 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5287 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5288 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5289 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5290 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5291 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5292 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5293 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5294 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5295 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5296 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5297 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm
5298 Main and line pressure reducer for oxygen 10-100 bar Vulkan LHR200/100 DIN according to ISO 2503, single-stage design, with safety pressure gauges according to ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 10 - 100 bar, output: 380 Nm?/h (compressed air) at 50 bar outlet pressure and 100 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477 Part 1, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 208765 G1/2RHak according to EN 560 208765-800 External thread G1/4" RHk according to EN560 208765-870 External thread G3/8" RHk according to EN 560 208765-6M Compression fitting VA 6mm 208765-8M Compression fitting VA 8mm 208765-10M Compression fitting VA 10mm 208765-12M Compression fitting VA 12mm 208765-15M Compression fitting VA 15mm 208765-18M Compression fitting VA 18mm