SELECT 
  cscart_product_descriptions.product_id, 
  cscart_product_descriptions.short_description, 
  IF(
    cscart_product_descriptions.short_description = '' 
    OR cscart_product_descriptions.short_description IS NULL, 
    cscart_product_descriptions.full_description, 
    ''
  ) AS full_description, 
  cscart_product_descriptions.meta_keywords, 
  cscart_product_descriptions.meta_description, 
  cscart_product_descriptions.search_words, 
  cscart_product_descriptions.promo_text, 
  cscart_product_descriptions.unit_name 
FROM 
  cscart_product_descriptions 
WHERE 
  cscart_product_descriptions.product_id IN (
    3612, 3613, 3614, 3615, 4224, 4225, 4226, 
    4227, 4228, 4229, 4230, 5079, 5080, 
    5081, 5082, 5083, 5084, 5085, 5086, 
    5087, 5088, 5089, 5090, 5091, 5092, 
    5093, 5094, 5095, 5096, 5097, 5098, 
    5099, 5100, 5101, 5102, 5103, 5104, 
    5105, 5106, 2760, 2761, 2762, 2763, 
    2764, 6348, 6349, 6350, 6351, 2756, 
    2757, 2758, 2759, 6343, 6344, 6345, 
    6346, 6347, 2818, 2819, 2820, 2821, 
    2822, 6404, 6405, 6406, 6407, 2933, 
    2934, 2935, 2936, 6517, 6518, 6519, 
    6520, 6521, 2510, 2511, 2512, 2513, 
    3837, 3838, 3839, 6109, 6110, 2277, 
    2278, 2279, 2280, 2327, 2328, 2329, 
    2330, 2394, 2395, 2396, 2397
  ) 
  AND cscart_product_descriptions.lang_code = 'en'

Query time 0.00179

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "115.60"
    },
    "table": {
      "table_name": "cscart_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code"
      ],
      "key_length": "9",
      "rows_examined_per_scan": 96,
      "rows_produced_per_join": 96,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_product_descriptions`.`product_id` in (3612,3613,3614,3615,4224,4225,4226,4227,4228,4229,4230,5079,5080,5081,5082,5083,5084,5085,5086,5087,5088,5089,5090,5091,5092,5093,5094,5095,5096,5097,5098,5099,5100,5101,5102,5103,5104,5105,5106,2760,2761,2762,2763,2764,6348,6349,6350,6351,2756,2757,2758,2759,6343,6344,6345,6346,6347,2818,2819,2820,2821,2822,6404,6405,6406,6407,2933,2934,2935,2936,6517,6518,6519,6520,6521,2510,2511,2512,2513,3837,3838,3839,6109,6110,2277,2278,2279,2280,2327,2328,2329,2330,2394,2395,2396,2397)) and (`gaseus`.`cscart_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "106.01",
        "eval_cost": "9.60",
        "prefix_cost": "115.61",
        "data_read_per_join": "438K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text",
        "unit_name"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text unit_name
2277 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2278 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2279 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2280 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2327 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2328 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2329 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2330 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2394 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2395 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2396 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2397 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2510 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
2511 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
2512 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
2513 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
2756 Vulkan LHR 200/200 BSP cylinder pressure reducer for compressed air, DIN 477-1, 10-200 bar according to ISO 2503, single-stage design, with safety gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10-200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G5/8RHaf A-screw according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 207770 G1/2RHak according to EN 560 207770-800 External thread G1/4" RHk according to EN560 207770-870 External thread G3/8" RHk according to EN 560 207770-6M Compression fitting VA 6mm 207770-8M Compression fitting VA 8mm 207770-10M Compression fitting VA 10mm 207770-12M Compression fitting VA 12mm 207770-15M Compression fitting VA 15mm 207770-18M Compression fitting VA 18mm
2757 Vulkan LHR 200/200 BSP cylinder pressure reducer for compressed air, DIN 477-1, 10-200 bar according to ISO 2503, single-stage design, with safety gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10-200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G5/8RHaf A-screw according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 207770 G1/2RHak according to EN 560 207770-800 External thread G1/4" RHk according to EN560 207770-870 External thread G3/8" RHk according to EN 560 207770-6M Compression fitting VA 6mm 207770-8M Compression fitting VA 8mm 207770-10M Compression fitting VA 10mm 207770-12M Compression fitting VA 12mm 207770-15M Compression fitting VA 15mm 207770-18M Compression fitting VA 18mm
2758 Vulkan LHR 200/200 BSP cylinder pressure reducer for compressed air, DIN 477-1, 10-200 bar according to ISO 2503, single-stage design, with safety gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10-200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G5/8RHaf A-screw according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 207770 G1/2RHak according to EN 560 207770-800 External thread G1/4" RHk according to EN560 207770-870 External thread G3/8" RHk according to EN 560 207770-6M Compression fitting VA 6mm 207770-8M Compression fitting VA 8mm 207770-10M Compression fitting VA 10mm 207770-12M Compression fitting VA 12mm 207770-15M Compression fitting VA 15mm 207770-18M Compression fitting VA 18mm
2759 Vulkan LHR 200/200 BSP cylinder pressure reducer for compressed air, DIN 477-1, 10-200 bar according to ISO 2503, single-stage design, with safety gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10-200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G5/8RHaf A-screw according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 207770 G1/2RHak according to EN 560 207770-800 External thread G1/4" RHk according to EN560 207770-870 External thread G3/8" RHk according to EN 560 207770-6M Compression fitting VA 6mm 207770-8M Compression fitting VA 8mm 207770-10M Compression fitting VA 10mm 207770-12M Compression fitting VA 12mm 207770-15M Compression fitting VA 15mm 207770-18M Compression fitting VA 18mm
2760 Vulkan LHR 200/100 BSP compressed air cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 100 bar adjustable, maximum output: 380 Nm³/h air at 50 bar outlet pressure, input: G5/8RHaf A-screw according to DIN 477-1, output: G1/2RHak according to EN560, input pressure gauge: 0 - 315/200 bar, output pressure gauge: 0 - 160/100 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 207760 G1/2RHak according to EN 560 207760-800 External thread G1/4" RHk according to EN560 207760-870 External thread G3/8" RHk according to EN 560 207760-6M Compression fitting VA 6mm 207760-8M Compression fitting VA 8mm 207760-10M Compression fitting VA 10mm 207760-12M Compression fitting VA 12mm 207760-15M Compression fitting VA 15mm 207760-18M Compression fitting VA 18mm
2761 <p>Vulkan LHR 200/100 BSP compressed air cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 100 bar adjustable, maximum output: 380 Nm³/h air at 50 bar outlet pressure, input: G5/8RHaf A-screw according to DIN 477-1, output: G1/2RHak according to EN560, input pressure gauge: 0 - 315/200 bar, output pressure gauge: 0 - 160/100 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 207760 G1/2RHak according to EN 560 207760-800 External thread G1/4" RHk according to EN560 207760-870 External thread G3/8" RHk according to EN 560 207760-6M Compression fitting VA 6mm 207760-8M Compression fitting VA 8mm 207760-10M Compression fitting VA 10mm 207760-12M Compression fitting VA 12mm 207760-15M Compression fitting VA 15mm 207760-18M Compression fitting VA 18mm</p>
2762 Vulkan LHR 200/100 BSP compressed air cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 100 bar adjustable, maximum output: 380 Nm³/h air at 50 bar outlet pressure, input: G5/8RHaf A-screw according to DIN 477-1, output: G1/2RHak according to EN560, input pressure gauge: 0 - 315/200 bar, output pressure gauge: 0 - 160/100 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 207760 G1/2RHak according to EN 560 207760-800 External thread G1/4" RHk according to EN560 207760-870 External thread G3/8" RHk according to EN 560 207760-6M Compression fitting VA 6mm 207760-8M Compression fitting VA 8mm 207760-10M Compression fitting VA 10mm 207760-12M Compression fitting VA 12mm 207760-15M Compression fitting VA 15mm 207760-18M Compression fitting VA 18mm
2763 Vulkan LHR 200/100 BSP compressed air cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 100 bar adjustable, maximum output: 380 Nm³/h air at 50 bar outlet pressure, input: G5/8RHaf A-screw according to DIN 477-1, output: G1/2RHak according to EN560, input pressure gauge: 0 - 315/200 bar, output pressure gauge: 0 - 160/100 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 207760 G1/2RHak according to EN 560 207760-800 External thread G1/4" RHk according to EN560 207760-870 External thread G3/8" RHk according to EN 560 207760-6M Compression fitting VA 6mm 207760-8M Compression fitting VA 8mm 207760-10M Compression fitting VA 10mm 207760-12M Compression fitting VA 12mm 207760-15M Compression fitting VA 15mm 207760-18M Compression fitting VA 18mm
2764 Vulkan LHR 200/100 BSP compressed air cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 100 bar adjustable, maximum output: 380 Nm³/h air at 50 bar outlet pressure, input: G5/8RHaf A-screw according to DIN 477-1, output: G1/2RHak according to EN560, input pressure gauge: 0 - 315/200 bar, output pressure gauge: 0 - 160/100 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 207760 G1/2RHak according to EN 560 207760-800 External thread G1/4" RHk according to EN560 207760-870 External thread G3/8" RHk according to EN 560 207760-6M Compression fitting VA 6mm 207760-8M Compression fitting VA 8mm 207760-10M Compression fitting VA 10mm 207760-12M Compression fitting VA 12mm 207760-15M Compression fitting VA 15mm 207760-18M Compression fitting VA 18mm
2818 Cylinder pressure reducer Vulkan LHR 200/200 BSP Helium DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 200 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 315/200 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20677026 G1/2RHak according to EN 560 20677026-800 External thread G1/4" RHk according to EN560 20677026-870 External thread G3/8" RHk according to EN 560 20677026-6M Compression fitting VA 6mm 20677026-8M Compression fitting VA 8mm 20677026-10M Compression fitting VA 10mm 20677026-12M Compression fitting VA 12mm 20677026-15M Compression fitting VA 15mm 20677026-18M compression fitting VA 18mm
2819 Cylinder pressure reducer Vulkan LHR 200/200 BSP Helium DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 200 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 315/200 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20677026 G1/2RHak according to EN 560 20677026-800 External thread G1/4" RHk according to EN560 20677026-870 External thread G3/8" RHk according to EN 560 20677026-6M Compression fitting VA 6mm 20677026-8M Compression fitting VA 8mm 20677026-10M Compression fitting VA 10mm 20677026-12M Compression fitting VA 12mm 20677026-15M Compression fitting VA 15mm 20677026-18M compression fitting VA 18mm
2820 Cylinder pressure reducer Vulkan LHR 200/200 BSP Helium DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 200 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 315/200 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20677026 G1/2RHak according to EN 560 20677026-800 External thread G1/4" RHk according to EN560 20677026-870 External thread G3/8" RHk according to EN 560 20677026-6M Compression fitting VA 6mm 20677026-8M Compression fitting VA 8mm 20677026-10M Compression fitting VA 10mm 20677026-12M Compression fitting VA 12mm 20677026-15M Compression fitting VA 15mm 20677026-18M compression fitting VA 18mm
2821 <p>Cylinder pressure reducer Vulkan LHR 200/200 BSP Helium DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 200 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 315/200 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20677026 G1/2RHak according to EN 560 20677026-800 External thread G1/4" RHk according to EN560 20677026-870 External thread G3/8" RHk according to EN 560 20677026-6M Compression fitting VA 6mm 20677026-8M Compression fitting VA 8mm 20677026-10M Compression fitting VA 10mm 20677026-12M Compression fitting VA 12mm 20677026-15M Compression fitting VA 15mm 20677026-18M compression fitting VA 18mm</p>
2822 Cylinder pressure reducer Vulkan LHR 200/200 BSP Helium DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 200 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 315/200 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20677026 G1/2RHak according to EN 560 20677026-800 External thread G1/4" RHk according to EN560 20677026-870 External thread G3/8" RHk according to EN 560 20677026-6M Compression fitting VA 6mm 20677026-8M Compression fitting VA 8mm 20677026-10M Compression fitting VA 10mm 20677026-12M Compression fitting VA 12mm 20677026-15M Compression fitting VA 15mm 20677026-18M compression fitting VA 18mm
2933 Vulkan LHR 200/100 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10-100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 10-100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/160 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 204760 G1/2RHak according to EN 560 204760-800 External thread G1/4" RHk according to EN560 204760-870 External thread G3/8" RHk according to EN 560 204760-6M Compression fitting VA 6mm 204760-8M Compression fitting VA 8mm 204760-10M Compression fitting VA 10mm 204760-12M Compression fitting VA 12mm 204760-15M Compression fitting VA 15mm 204760-18M Compression fitting VA 18mm
2934 Vulkan LHR 200/100 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10-100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 10-100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/160 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 204760 G1/2RHak according to EN 560 204760-800 External thread G1/4" RHk according to EN560 204760-870 External thread G3/8" RHk according to EN 560 204760-6M Compression fitting VA 6mm 204760-8M Compression fitting VA 8mm 204760-10M Compression fitting VA 10mm 204760-12M Compression fitting VA 12mm 204760-15M Compression fitting VA 15mm 204760-18M Compression fitting VA 18mm
2935 Vulkan LHR 200/100 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10-100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 10-100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/160 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 204760 G1/2RHak according to EN 560 204760-800 External thread G1/4" RHk according to EN560 204760-870 External thread G3/8" RHk according to EN 560 204760-6M Compression fitting VA 6mm 204760-8M Compression fitting VA 8mm 204760-10M Compression fitting VA 10mm 204760-12M Compression fitting VA 12mm 204760-15M Compression fitting VA 15mm 204760-18M Compression fitting VA 18mm
2936 Vulkan LHR 200/100 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10-100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 10-100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/160 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 204760 G1/2RHak according to EN 560 204760-800 External thread G1/4" RHk according to EN560 204760-870 External thread G3/8" RHk according to EN 560 204760-6M Compression fitting VA 6mm 204760-8M Compression fitting VA 8mm 204760-10M Compression fitting VA 10mm 204760-12M Compression fitting VA 12mm 204760-15M Compression fitting VA 15mm 204760-18M Compression fitting VA 18mm
3612 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
3613 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
3614 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
3615 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
3837 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
3838 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
3839 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
4224 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
4225 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
4226 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
4227 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
4228 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
4229 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
4230 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5079 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5080 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5081 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5082 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5083 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5084 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5085 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5086 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5087 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5088 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5089 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5090 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5091 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5092 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5093 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5094 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5095 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5096 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5097 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5098 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5099 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5100 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5101 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5102 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5103 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5104 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5105 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
5106 <p>Vulkan LR40 Effect Helium in-line ribbed pressure reducer, 15-40 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant downstream pressure with falling upstream pressure, with safety gauges according to ISO 5171, with metal diaphragm, maximum inlet pressure: 100 bar, outlet pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar downstream pressure. Inlet: external thread G3/4RHak - EN 560, Outlet: external thread G3/4RHak - EN 560, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 220 x 280 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/membrane Inlet/outlet screw connection 10664626 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 10664626-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10664626-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10664626-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10664626-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10664626-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 10664626-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 10664626-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G3/4" RHak according to EN 560 10664626-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10664626-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting. 10664626-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting. 10664626-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting. 10664626-MM-15M-15M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 15mm stainless steel compression fitting. 10664626-MM-18M-18M for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) on both sides. 18mm stainless steel compression fitting.</p>
6109 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
6110 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
6343 Vulkan LHR 200/200 BSP cylinder pressure reducer for compressed air, DIN 477-1, 10-200 bar according to ISO 2503, single-stage design, with safety gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10-200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G5/8RHaf A-screw according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 207770 G1/2RHak according to EN 560 207770-800 External thread G1/4" RHk according to EN560 207770-870 External thread G3/8" RHk according to EN 560 207770-6M Compression fitting VA 6mm 207770-8M Compression fitting VA 8mm 207770-10M Compression fitting VA 10mm 207770-12M Compression fitting VA 12mm 207770-15M Compression fitting VA 15mm 207770-18M Compression fitting VA 18mm
6344 Vulkan LHR 200/200 BSP cylinder pressure reducer for compressed air, DIN 477-1, 10-200 bar according to ISO 2503, single-stage design, with safety gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10-200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G5/8RHaf A-screw according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 207770 G1/2RHak according to EN 560 207770-800 External thread G1/4" RHk according to EN560 207770-870 External thread G3/8" RHk according to EN 560 207770-6M Compression fitting VA 6mm 207770-8M Compression fitting VA 8mm 207770-10M Compression fitting VA 10mm 207770-12M Compression fitting VA 12mm 207770-15M Compression fitting VA 15mm 207770-18M Compression fitting VA 18mm
6345 Vulkan LHR 200/200 BSP cylinder pressure reducer for compressed air, DIN 477-1, 10-200 bar according to ISO 2503, single-stage design, with safety gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10-200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G5/8RHaf A-screw according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 207770 G1/2RHak according to EN 560 207770-800 External thread G1/4" RHk according to EN560 207770-870 External thread G3/8" RHk according to EN 560 207770-6M Compression fitting VA 6mm 207770-8M Compression fitting VA 8mm 207770-10M Compression fitting VA 10mm 207770-12M Compression fitting VA 12mm 207770-15M Compression fitting VA 15mm 207770-18M Compression fitting VA 18mm
6346 Vulkan LHR 200/200 BSP cylinder pressure reducer for compressed air, DIN 477-1, 10-200 bar according to ISO 2503, single-stage design, with safety gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10-200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G5/8RHaf A-screw according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 207770 G1/2RHak according to EN 560 207770-800 External thread G1/4" RHk according to EN560 207770-870 External thread G3/8" RHk according to EN 560 207770-6M Compression fitting VA 6mm 207770-8M Compression fitting VA 8mm 207770-10M Compression fitting VA 10mm 207770-12M Compression fitting VA 12mm 207770-15M Compression fitting VA 15mm 207770-18M Compression fitting VA 18mm
6347 Vulkan LHR 200/200 BSP cylinder pressure reducer for compressed air, DIN 477-1, 10-200 bar according to ISO 2503, single-stage design, with safety gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10-200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: G5/8RHaf A-screw according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 207770 G1/2RHak according to EN 560 207770-800 External thread G1/4" RHk according to EN560 207770-870 External thread G3/8" RHk according to EN 560 207770-6M Compression fitting VA 6mm 207770-8M Compression fitting VA 8mm 207770-10M Compression fitting VA 10mm 207770-12M Compression fitting VA 12mm 207770-15M Compression fitting VA 15mm 207770-18M Compression fitting VA 18mm
6348 Vulkan LHR 200/100 BSP compressed air cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 100 bar adjustable, maximum output: 380 Nm³/h air at 50 bar outlet pressure, input: G5/8RHaf A-screw according to DIN 477-1, output: G1/2RHak according to EN560, input pressure gauge: 0 - 315/200 bar, output pressure gauge: 0 - 160/100 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 207760 G1/2RHak according to EN 560 207760-800 External thread G1/4" RHk according to EN560 207760-870 External thread G3/8" RHk according to EN 560 207760-6M Compression fitting VA 6mm 207760-8M Compression fitting VA 8mm 207760-10M Compression fitting VA 10mm 207760-12M Compression fitting VA 12mm 207760-15M Compression fitting VA 15mm 207760-18M Compression fitting VA 18mm
6349 Vulkan LHR 200/100 BSP compressed air cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 100 bar adjustable, maximum output: 380 Nm³/h air at 50 bar outlet pressure, input: G5/8RHaf A-screw according to DIN 477-1, output: G1/2RHak according to EN560, input pressure gauge: 0 - 315/200 bar, output pressure gauge: 0 - 160/100 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 207760 G1/2RHak according to EN 560 207760-800 External thread G1/4" RHk according to EN560 207760-870 External thread G3/8" RHk according to EN 560 207760-6M Compression fitting VA 6mm 207760-8M Compression fitting VA 8mm 207760-10M Compression fitting VA 10mm 207760-12M Compression fitting VA 12mm 207760-15M Compression fitting VA 15mm 207760-18M Compression fitting VA 18mm
6350 Vulkan LHR 200/100 BSP compressed air cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 100 bar adjustable, maximum output: 380 Nm³/h air at 50 bar outlet pressure, input: G5/8RHaf A-screw according to DIN 477-1, output: G1/2RHak according to EN560, input pressure gauge: 0 - 315/200 bar, output pressure gauge: 0 - 160/100 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 207760 G1/2RHak according to EN 560 207760-800 External thread G1/4" RHk according to EN560 207760-870 External thread G3/8" RHk according to EN 560 207760-6M Compression fitting VA 6mm 207760-8M Compression fitting VA 8mm 207760-10M Compression fitting VA 10mm 207760-12M Compression fitting VA 12mm 207760-15M Compression fitting VA 15mm 207760-18M Compression fitting VA 18mm
6351 Vulkan LHR 200/100 BSP compressed air cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 100 bar adjustable, maximum output: 380 Nm³/h air at 50 bar outlet pressure, input: G5/8RHaf A-screw according to DIN 477-1, output: G1/2RHak according to EN560, input pressure gauge: 0 - 315/200 bar, output pressure gauge: 0 - 160/100 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 207760 G1/2RHak according to EN 560 207760-800 External thread G1/4" RHk according to EN560 207760-870 External thread G3/8" RHk according to EN 560 207760-6M Compression fitting VA 6mm 207760-8M Compression fitting VA 8mm 207760-10M Compression fitting VA 10mm 207760-12M Compression fitting VA 12mm 207760-15M Compression fitting VA 15mm 207760-18M Compression fitting VA 18mm
6404 Cylinder pressure reducer Vulkan LHR 200/200 BSP Helium DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 200 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 315/200 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20677026 G1/2RHak according to EN 560 20677026-800 External thread G1/4" RHk according to EN560 20677026-870 External thread G3/8" RHk according to EN 560 20677026-6M Compression fitting VA 6mm 20677026-8M Compression fitting VA 8mm 20677026-10M Compression fitting VA 10mm 20677026-12M Compression fitting VA 12mm 20677026-15M Compression fitting VA 15mm 20677026-18M compression fitting VA 18mm
6405 <p>Cylinder pressure reducer Vulkan LHR 200/200 BSP Helium DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 200 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 315/200 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20677026 G1/2RHak according to EN 560 20677026-800 External thread G1/4" RHk according to EN560 20677026-870 External thread G3/8" RHk according to EN 560 20677026-6M Compression fitting VA 6mm 20677026-8M Compression fitting VA 8mm 20677026-10M Compression fitting VA 10mm 20677026-12M Compression fitting VA 12mm 20677026-15M Compression fitting VA 15mm 20677026-18M compression fitting VA 18mm</p>
6406 Cylinder pressure reducer Vulkan LHR 200/200 BSP Helium DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 200 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 315/200 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20677026 G1/2RHak according to EN 560 20677026-800 External thread G1/4" RHk according to EN560 20677026-870 External thread G3/8" RHk according to EN 560 20677026-6M Compression fitting VA 6mm 20677026-8M Compression fitting VA 8mm 20677026-10M Compression fitting VA 10mm 20677026-12M Compression fitting VA 12mm 20677026-15M Compression fitting VA 15mm 20677026-18M compression fitting VA 18mm
6407 <p>Cylinder pressure reducer Vulkan LHR 200/200 BSP Helium DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 200 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 315/200 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20677026 G1/2RHak according to EN 560 20677026-800 External thread G1/4" RHk according to EN560 20677026-870 External thread G3/8" RHk according to EN 560 20677026-6M Compression fitting VA 6mm 20677026-8M Compression fitting VA 8mm 20677026-10M Compression fitting VA 10mm 20677026-12M Compression fitting VA 12mm 20677026-15M Compression fitting VA 15mm 20677026-18M compression fitting VA 18mm</p>
6517 Vulkan LHR 200/100 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10-100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 10-100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/160 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 204760 G1/2RHak according to EN 560 204760-800 External thread G1/4" RHk according to EN560 204760-870 External thread G3/8" RHk according to EN 560 204760-6M Compression fitting VA 6mm 204760-8M Compression fitting VA 8mm 204760-10M Compression fitting VA 10mm 204760-12M Compression fitting VA 12mm 204760-15M Compression fitting VA 15mm 204760-18M Compression fitting VA 18mm
6518 Vulkan LHR 200/100 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10-100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 10-100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/160 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 204760 G1/2RHak according to EN 560 204760-800 External thread G1/4" RHk according to EN560 204760-870 External thread G3/8" RHk according to EN 560 204760-6M Compression fitting VA 6mm 204760-8M Compression fitting VA 8mm 204760-10M Compression fitting VA 10mm 204760-12M Compression fitting VA 12mm 204760-15M Compression fitting VA 15mm 204760-18M Compression fitting VA 18mm
6519 Vulkan LHR 200/100 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10-100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 10-100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/160 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 204760 G1/2RHak according to EN 560 204760-800 External thread G1/4" RHk according to EN560 204760-870 External thread G3/8" RHk according to EN 560 204760-6M Compression fitting VA 6mm 204760-8M Compression fitting VA 8mm 204760-10M Compression fitting VA 10mm 204760-12M Compression fitting VA 12mm 204760-15M Compression fitting VA 15mm 204760-18M Compression fitting VA 18mm
6520 Vulkan LHR 200/100 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10-100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 10-100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/160 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 204760 G1/2RHak according to EN 560 204760-800 External thread G1/4" RHk according to EN560 204760-870 External thread G3/8" RHk according to EN 560 204760-6M Compression fitting VA 6mm 204760-8M Compression fitting VA 8mm 204760-10M Compression fitting VA 10mm 204760-12M Compression fitting VA 12mm 204760-15M Compression fitting VA 15mm 204760-18M Compression fitting VA 18mm
6521 Vulkan LHR 200/100 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10-100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 10-100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/160 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 204760 G1/2RHak according to EN 560 204760-800 External thread G1/4" RHk according to EN560 204760-870 External thread G3/8" RHk according to EN 560 204760-6M Compression fitting VA 6mm 204760-8M Compression fitting VA 8mm 204760-10M Compression fitting VA 10mm 204760-12M Compression fitting VA 12mm 204760-15M Compression fitting VA 15mm 204760-18M Compression fitting VA 18mm