SELECT 
  cscart_ult_product_descriptions.product_id, 
  cscart_ult_product_descriptions.short_description, 
  IF(
    cscart_ult_product_descriptions.short_description = "", 
    cscart_ult_product_descriptions.full_description, 
    ""
  ) AS full_description, 
  cscart_ult_product_descriptions.meta_keywords, 
  cscart_ult_product_descriptions.meta_description, 
  cscart_ult_product_descriptions.search_words, 
  cscart_ult_product_descriptions.promo_text 
FROM 
  cscart_ult_product_descriptions 
WHERE 
  cscart_ult_product_descriptions.product_id IN (
    4043, 4044, 4124, 4125, 4126, 4127, 4178, 
    4179, 4180, 43, 44, 45, 46, 47, 48, 49, 
    90, 91, 92, 93, 94, 95, 96, 154, 155, 156, 
    157, 158, 159, 160, 175, 176, 177, 178, 
    179, 180, 181, 257, 258, 259, 260, 261, 
    262, 263, 311, 312, 313, 314, 315, 316, 
    3539, 3540, 3541, 3542, 3543, 3544, 
    3545, 3954, 3955, 3956, 3957, 3958, 
    3959, 3960, 3999, 4000, 4001, 4002, 
    4003, 4004, 4005, 4059, 4060, 4061, 
    4062, 4063, 4064, 4065, 4142, 4143, 
    4144, 4145, 4146, 4147, 4148, 4195, 
    4196, 4197, 4198, 4199, 4200, 4201, 
    6716, 6715, 3117, 3119
  ) 
  AND cscart_ult_product_descriptions.company_id = 1 
  AND cscart_ult_product_descriptions.lang_code = 'en'

Query time 0.00171

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "75.71"
    },
    "table": {
      "table_name": "cscart_ult_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id",
        "company_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code",
        "company_id"
      ],
      "key_length": "13",
      "rows_examined_per_scan": 96,
      "rows_produced_per_join": 96,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_ult_product_descriptions`.`company_id` = 1) and (`gaseus`.`cscart_ult_product_descriptions`.`product_id` in (4043,4044,4124,4125,4126,4127,4178,4179,4180,43,44,45,46,47,48,49,90,91,92,93,94,95,96,154,155,156,157,158,159,160,175,176,177,178,179,180,181,257,258,259,260,261,262,263,311,312,313,314,315,316,3539,3540,3541,3542,3543,3544,3545,3954,3955,3956,3957,3958,3959,3960,3999,4000,4001,4002,4003,4004,4005,4059,4060,4061,4062,4063,4064,4065,4142,4143,4144,4145,4146,4147,4148,4195,4196,4197,4198,4199,4200,4201,6716,6715,3117,3119)) and (`gaseus`.`cscart_ult_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "66.11",
        "eval_cost": "9.60",
        "prefix_cost": "75.71",
        "data_read_per_join": "366K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "company_id",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text
43 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
44 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
45 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
46 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
47 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
48 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
49 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
90 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
91 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
92 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
93 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
94 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
95 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
96 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
154 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
155 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
156 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
157 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
158 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
159 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
160 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
175 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
176 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
177 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
178 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
179 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
180 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
181 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
257 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
258 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
259 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
260 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
261 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
262 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
263 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
311 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
312 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
313 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
314 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
315 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
316 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3117 Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm
3119 Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm
3539 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3540 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3541 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3542 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3543 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3544 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3545 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3954 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3955 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3956 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3957 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3958 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3959 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3960 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3999 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4000 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4001 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4002 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4003 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4004 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4005 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4043 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
4044 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
4059 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4060 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4061 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4062 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4063 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4064 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4065 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4124 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
4125 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
4126 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
4127 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
4142 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4143 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4144 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4145 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4146 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4147 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4148 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4178 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
4179 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
4180 Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting
4195 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4196 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4197 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4198 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4199 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4200 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
4201 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
6715 Tapping Points: Pressure Reducer Vulkan E10F Flowmeter LabLine Forming Gas 34 Nl/min. Completely chrome-plated with metal diaphragms for gas purity 5.0, based on ISO 2503<br />Standards & Design:<br /><br />Class 20<br />single-stage design, with flowmeter for monitoring the exact flow rate in Nl/min<br />according to DIN EN 560<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 20 bar<br />• Output pressure: 4<br />• Inlet: G 3/8 LHk U-nut according to DIN EN 560<br />• Outlet: 6mm double clamp ring, stainless steel<br /><br />Dimensions:<br /><br />Width x Height x Depth: 120 x 210 x 65 mm
6716 Tapping Points: Pressure Reducer Vulkan E10F Flowmeter LabLine Forming Gas 34 Nl/min. Completely chrome-plated with metal diaphragms for gas purity 5.0, based on ISO 2503<br />Standards & Design:<br /><br />Class 20<br />single-stage design, with flowmeter for monitoring the exact flow rate in Nl/min<br />according to DIN EN 560<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 20 bar<br />• Output pressure: 4<br />• Inlet: G 3/8 LHk U-nut according to DIN EN 560<br />• Outlet: 6mm double clamp ring, stainless steel<br /><br />Dimensions:<br /><br />Width x Height x Depth: 120 x 210 x 65 mm