SELECT 
  cscart_ult_product_descriptions.product_id, 
  cscart_ult_product_descriptions.short_description, 
  IF(
    cscart_ult_product_descriptions.short_description = "", 
    cscart_ult_product_descriptions.full_description, 
    ""
  ) AS full_description, 
  cscart_ult_product_descriptions.meta_keywords, 
  cscart_ult_product_descriptions.meta_description, 
  cscart_ult_product_descriptions.search_words, 
  cscart_ult_product_descriptions.promo_text 
FROM 
  cscart_ult_product_descriptions 
WHERE 
  cscart_ult_product_descriptions.product_id IN (
    6700, 12, 13, 14, 15, 16, 17, 18, 65, 66, 
    67, 68, 69, 70, 71, 119, 120, 121, 122, 
    123, 124, 125, 126, 127, 128, 129, 130, 
    131, 132, 233, 234, 235, 236, 237, 238, 
    239, 286, 287, 288, 289, 290, 291, 292, 
    3922, 3923, 3924, 3925, 3926, 3927, 
    3928, 3976, 3977, 3978, 3979, 3980, 
    3981, 3982, 4028, 4029, 4030, 4031, 
    4032, 4033, 4034, 4035, 4036, 4037, 
    4038, 4039, 4040, 4041, 4117, 4118, 
    4119, 4120, 4121, 4122, 4123, 4171, 
    4172, 4173, 4174, 4175, 4176, 50, 51, 
    52, 53, 54, 55, 56, 97, 98, 99, 100, 101
  ) 
  AND cscart_ult_product_descriptions.company_id = 1 
  AND cscart_ult_product_descriptions.lang_code = 'en'

Query time 0.00206

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "75.71"
    },
    "table": {
      "table_name": "cscart_ult_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id",
        "company_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code",
        "company_id"
      ],
      "key_length": "13",
      "rows_examined_per_scan": 96,
      "rows_produced_per_join": 96,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_ult_product_descriptions`.`company_id` = 1) and (`gaseus`.`cscart_ult_product_descriptions`.`product_id` in (6700,12,13,14,15,16,17,18,65,66,67,68,69,70,71,119,120,121,122,123,124,125,126,127,128,129,130,131,132,233,234,235,236,237,238,239,286,287,288,289,290,291,292,3922,3923,3924,3925,3926,3927,3928,3976,3977,3978,3979,3980,3981,3982,4028,4029,4030,4031,4032,4033,4034,4035,4036,4037,4038,4039,4040,4041,4117,4118,4119,4120,4121,4122,4123,4171,4172,4173,4174,4175,4176,50,51,52,53,54,55,56,97,98,99,100,101)) and (`gaseus`.`cscart_ult_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "66.11",
        "eval_cost": "9.60",
        "prefix_cost": "75.71",
        "data_read_per_join": "366K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "company_id",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text
12 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
13 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
14 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
15 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
16 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
17 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
18 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
50 <p>Vulkan L10 line pressure reducer for compressed air G1/2RH both sides, 0-10 bar, based on ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0-10 bar, adjustable. Maximum output: 45 Nm³/h at 10 bar outlet pressure. Inlet: G1/2RHak according to EN 560. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-40/20 bar. Outlet pressure gauge: 0-16/10 bar. Width x Height x Depth: 210 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (Surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order numberGas purity/membraneInlet/outlet screw connection 107529 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107529-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107529-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107529-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107529-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107529-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107529-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107529-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107529-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107529-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107529-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107529-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107529-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107529-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
51 <p>Vulkan L10 line pressure reducer for compressed air G1/2RH both sides, 0-10 bar, based on ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0-10 bar, adjustable. Maximum output: 45 Nm³/h at 10 bar outlet pressure. Inlet: G1/2RHak according to EN 560. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-40/20 bar. Outlet pressure gauge: 0-16/10 bar. Width x Height x Depth: 210 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (Surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order numberGas purity/membraneInlet/outlet screw connection 107529 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107529-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107529-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107529-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107529-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107529-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107529-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107529-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107529-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107529-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107529-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107529-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107529-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107529-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
52 <p>Vulkan L10 line pressure reducer for compressed air G1/2RH both sides, 0-10 bar, based on ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0-10 bar, adjustable. Maximum output: 45 Nm³/h at 10 bar outlet pressure. Inlet: G1/2RHak according to EN 560. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-40/20 bar. Outlet pressure gauge: 0-16/10 bar. Width x Height x Depth: 210 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (Surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order numberGas purity/membraneInlet/outlet screw connection 107529 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107529-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107529-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107529-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107529-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107529-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107529-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107529-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107529-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107529-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107529-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107529-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107529-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107529-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
53 <p>Vulkan L10 line pressure reducer for compressed air G1/2RH both sides, 0-10 bar, based on ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0-10 bar, adjustable. Maximum output: 45 Nm³/h at 10 bar outlet pressure. Inlet: G1/2RHak according to EN 560. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-40/20 bar. Outlet pressure gauge: 0-16/10 bar. Width x Height x Depth: 210 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (Surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order numberGas purity/membraneInlet/outlet screw connection 107529 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107529-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107529-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107529-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107529-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107529-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107529-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107529-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107529-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107529-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107529-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107529-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107529-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107529-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
54 <p>Vulkan L10 line pressure reducer for compressed air G1/2RH both sides, 0-10 bar, based on ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0-10 bar, adjustable. Maximum output: 45 Nm³/h at 10 bar outlet pressure. Inlet: G1/2RHak according to EN 560. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-40/20 bar. Outlet pressure gauge: 0-16/10 bar. Width x Height x Depth: 210 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (Surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order numberGas purity/membraneInlet/outlet screw connection 107529 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107529-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107529-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107529-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107529-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107529-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107529-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107529-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107529-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107529-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107529-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107529-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107529-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107529-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
55 <p>Vulkan L10 line pressure reducer for compressed air G1/2RH both sides, 0-10 bar, based on ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0-10 bar, adjustable. Maximum output: 45 Nm³/h at 10 bar outlet pressure. Inlet: G1/2RHak according to EN 560. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-40/20 bar. Outlet pressure gauge: 0-16/10 bar. Width x Height x Depth: 210 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (Surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order numberGas purity/membraneInlet/outlet screw connection 107529 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107529-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107529-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107529-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107529-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107529-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107529-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107529-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107529-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107529-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107529-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107529-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107529-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107529-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
56 <p>Vulkan L10 line pressure reducer for compressed air G1/2RH both sides, 0-10 bar, based on ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0-10 bar, adjustable. Maximum output: 45 Nm³/h at 10 bar outlet pressure. Inlet: G1/2RHak according to EN 560. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-40/20 bar. Outlet pressure gauge: 0-16/10 bar. Width x Height x Depth: 210 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (Surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order numberGas purity/membraneInlet/outlet screw connection 107529 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107529-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107529-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107529-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107529-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107529-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107529-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107529-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107529-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107529-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107529-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107529-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107529-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107529-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
65 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
66 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
67 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
68 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
69 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
70 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
71 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
97 <p>Vulkan L10 line pressure reducer for compressed air G1/2RH both sides, 0-10 bar, based on ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0-10 bar, adjustable. Maximum output: 45 Nm³/h at 10 bar outlet pressure. Inlet: G1/2RHak according to EN 560. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-40/20 bar. Outlet pressure gauge: 0-16/10 bar. Width x Height x Depth: 210 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (Surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order numberGas purity/membraneInlet/outlet screw connection 107529 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107529-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107529-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107529-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107529-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107529-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107529-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107529-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107529-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107529-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107529-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107529-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107529-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107529-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
98 <p>Vulkan L10 line pressure reducer for compressed air G1/2RH both sides, 0-10 bar, based on ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0-10 bar, adjustable. Maximum output: 45 Nm³/h at 10 bar outlet pressure. Inlet: G1/2RHak according to EN 560. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-40/20 bar. Outlet pressure gauge: 0-16/10 bar. Width x Height x Depth: 210 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (Surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order numberGas purity/membraneInlet/outlet screw connection 107529 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107529-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107529-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107529-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107529-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107529-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107529-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107529-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107529-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107529-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107529-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107529-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107529-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107529-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
99 <p>Vulkan L10 line pressure reducer for compressed air G1/2RH both sides, 0-10 bar, based on ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0-10 bar, adjustable. Maximum output: 45 Nm³/h at 10 bar outlet pressure. Inlet: G1/2RHak according to EN 560. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-40/20 bar. Outlet pressure gauge: 0-16/10 bar. Width x Height x Depth: 210 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (Surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order numberGas purity/membraneInlet/outlet screw connection 107529 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107529-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107529-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107529-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107529-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107529-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107529-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107529-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107529-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107529-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107529-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107529-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107529-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107529-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
100 <p>Vulkan L10 line pressure reducer for compressed air G1/2RH both sides, 0-10 bar, based on ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0-10 bar, adjustable. Maximum output: 45 Nm³/h at 10 bar outlet pressure. Inlet: G1/2RHak according to EN 560. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-40/20 bar. Outlet pressure gauge: 0-16/10 bar. Width x Height x Depth: 210 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (Surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order numberGas purity/membraneInlet/outlet screw connection 107529 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107529-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107529-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107529-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107529-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107529-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107529-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107529-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107529-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107529-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107529-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107529-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107529-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107529-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
101 <p>Vulkan L10 line pressure reducer for compressed air G1/2RH both sides, 0-10 bar, based on ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0-10 bar, adjustable. Maximum output: 45 Nm³/h at 10 bar outlet pressure. Inlet: G1/2RHak according to EN 560. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-40/20 bar. Outlet pressure gauge: 0-16/10 bar. Width x Height x Depth: 210 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (Surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order numberGas purity/membraneInlet/outlet screw connection 107529 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107529-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107529-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107529-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107529-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107529-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107529-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107529-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107529-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107529-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107529-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107529-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107529-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107529-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
119 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
120 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
121 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
122 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
123 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
124 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
125 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
126 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
127 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
128 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
129 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
130 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
131 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
132 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
233 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
234 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
235 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
236 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
237 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
238 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
239 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
286 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
287 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
288 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
289 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
290 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
291 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
292 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3922 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3923 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3924 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3925 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3926 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3927 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3928 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3976 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3977 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3978 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3979 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3980 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3981 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
3982 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4028 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4029 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4030 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4031 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4032 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4033 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4034 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4035 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4036 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4037 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4038 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4039 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4040 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4041 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4117 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4118 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4119 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4120 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4121 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4122 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4123 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4171 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4172 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4173 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4174 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4175 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
4176 <p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p>
6700 Vulkan LHR3 nitrogen line pressure reducer G 2RHi, 0.3 - 3.0 bar<br />Standards & Design:<br /><br />single-stage design, without pressure gauge<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 6 bar<br />• outlet pressure<br />• Output pressure: 0<br /><br />Dimensions:<br /><br />Width x Height x Depth: 240 x 300 x 240 mm