SELECT 
  cscart_ult_product_descriptions.product_id, 
  cscart_ult_product_descriptions.short_description, 
  IF(
    cscart_ult_product_descriptions.short_description = "", 
    cscart_ult_product_descriptions.full_description, 
    ""
  ) AS full_description, 
  cscart_ult_product_descriptions.meta_keywords, 
  cscart_ult_product_descriptions.meta_description, 
  cscart_ult_product_descriptions.search_words, 
  cscart_ult_product_descriptions.promo_text 
FROM 
  cscart_ult_product_descriptions 
WHERE 
  cscart_ult_product_descriptions.product_id IN (
    5348, 5349, 5350, 5351, 5352, 2832, 2833, 
    2834, 2835, 6417, 6418, 6419, 6420, 
    6421, 2823, 2824, 2825, 2826, 6408, 
    6409, 6410, 6411, 6412, 2827, 2828, 
    2829, 2830, 2831, 6413, 6414, 6415, 
    6416, 2928, 2929, 2930, 2931, 2932, 
    6513, 6514, 6515, 6516, 3032, 6609, 
    3028, 3029, 3030, 3031, 6605, 6606, 
    6607, 6608, 6610, 6611, 6612, 6613, 
    3024, 3025, 3026, 3027, 3301, 6847, 
    3300, 2841, 2842, 2843, 2844, 6426, 
    6427, 6428, 6429, 6430, 2765, 2766, 
    2767, 2768, 6352, 6353, 6354, 6355, 
    6356, 2185, 2186, 2187, 2188, 5785, 
    5786, 5787, 5788, 5789, 6641, 6219, 
    5807, 3722, 5819, 1516, 6623
  ) 
  AND cscart_ult_product_descriptions.company_id = 1 
  AND cscart_ult_product_descriptions.lang_code = 'en'

Query time 0.00169

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "75.71"
    },
    "table": {
      "table_name": "cscart_ult_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id",
        "company_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code",
        "company_id"
      ],
      "key_length": "13",
      "rows_examined_per_scan": 96,
      "rows_produced_per_join": 96,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_ult_product_descriptions`.`company_id` = 1) and (`gaseus`.`cscart_ult_product_descriptions`.`product_id` in (5348,5349,5350,5351,5352,2832,2833,2834,2835,6417,6418,6419,6420,6421,2823,2824,2825,2826,6408,6409,6410,6411,6412,2827,2828,2829,2830,2831,6413,6414,6415,6416,2928,2929,2930,2931,2932,6513,6514,6515,6516,3032,6609,3028,3029,3030,3031,6605,6606,6607,6608,6610,6611,6612,6613,3024,3025,3026,3027,3301,6847,3300,2841,2842,2843,2844,6426,6427,6428,6429,6430,2765,2766,2767,2768,6352,6353,6354,6355,6356,2185,2186,2187,2188,5785,5786,5787,5788,5789,6641,6219,5807,3722,5819,1516,6623)) and (`gaseus`.`cscart_ult_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "66.11",
        "eval_cost": "9.60",
        "prefix_cost": "75.71",
        "data_read_per_join": "366K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "company_id",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text
1516 Main pressure reducer Vulkan H20/200 Effect Oxygen right for AM35/AM35H according to DIN EN ISO 7291, single-stage design, burnout tested according to ISO 7291, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 20 bar fixed. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: external thread M24x1.5RHak-16S, Outlet: union nut G1/2RHk according to DIN EN 560. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 40 / 20 bar. Width x Height x Depth: 210 x 190 x 75 mm. *****NOTE***** Replacement pressure reducer for automatic changeover group AM35/AM35H (20 bar fixed) This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm SS321 (1.4541).
2185 Main pressure reducer Vulkan H60/200 Effect CO2 DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 20656006 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 20656006-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 20656006-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 20656006-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 20656006-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 20656006-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 20656006-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 20656006-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 20656006-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
2186 Main pressure reducer Vulkan H60/200 Effect CO2 DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 20656006 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 20656006-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 20656006-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 20656006-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 20656006-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 20656006-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 20656006-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 20656006-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 20656006-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
2187 Main pressure reducer Vulkan H60/200 Effect CO2 DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 20656006 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 20656006-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 20656006-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 20656006-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 20656006-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 20656006-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 20656006-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 20656006-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 20656006-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
2188 Main pressure reducer Vulkan H60/200 Effect CO2 DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 20656006 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 20656006-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 20656006-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 20656006-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 20656006-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 20656006-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 20656006-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 20656006-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 20656006-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
2765 Main pressure reducer Vulkan H60/200 Effect compressed air DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: G 5/8 RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (extra charge): Item numberGas purityOutlet connection 207560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 207560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 207560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 207560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 207560-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 207560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 207560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 207560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 207560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
2766 Main pressure reducer Vulkan H60/200 Effect compressed air DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: G 5/8 RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (extra charge): Item numberGas purityOutlet connection 207560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 207560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 207560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 207560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 207560-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 207560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 207560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 207560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 207560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
2767 Main pressure reducer Vulkan H60/200 Effect compressed air DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: G 5/8 RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (extra charge): Item numberGas purityOutlet connection 207560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 207560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 207560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 207560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 207560-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 207560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 207560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 207560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 207560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
2768 Main pressure reducer Vulkan H60/200 Effect compressed air DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: G 5/8 RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (extra charge): Item numberGas purityOutlet connection 207560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 207560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 207560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 207560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 207560-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 207560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 207560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 207560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 207560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
2823 Vulkan LHR 200/200 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1. Outlet: G1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206770 G1/2RHak according to EN 560 206770-800 External thread G1/4" RHk according to EN560 206770-870 External thread G3/8" RHk according to EN 560 206770-6M Compression fitting VA 6mm 206770-8M Compression fitting VA 8mm 206770-10M Compression fitting VA 10mm 206770-12M Compression fitting VA 12mm 206770-15M Compression fitting VA 15mm 206770-18M Compression fitting VA 18mm
2824 Vulkan LHR 200/200 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1. Outlet: G1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206770 G1/2RHak according to EN 560 206770-800 External thread G1/4" RHk according to EN560 206770-870 External thread G3/8" RHk according to EN 560 206770-6M Compression fitting VA 6mm 206770-8M Compression fitting VA 8mm 206770-10M Compression fitting VA 10mm 206770-12M Compression fitting VA 12mm 206770-15M Compression fitting VA 15mm 206770-18M Compression fitting VA 18mm
2825 Vulkan LHR 200/200 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1. Outlet: G1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206770 G1/2RHak according to EN 560 206770-800 External thread G1/4" RHk according to EN560 206770-870 External thread G3/8" RHk according to EN 560 206770-6M Compression fitting VA 6mm 206770-8M Compression fitting VA 8mm 206770-10M Compression fitting VA 10mm 206770-12M Compression fitting VA 12mm 206770-15M Compression fitting VA 15mm 206770-18M Compression fitting VA 18mm
2826 Vulkan LHR 200/200 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1. Outlet: G1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206770 G1/2RHak according to EN 560 206770-800 External thread G1/4" RHk according to EN560 206770-870 External thread G3/8" RHk according to EN 560 206770-6M Compression fitting VA 6mm 206770-8M Compression fitting VA 8mm 206770-10M Compression fitting VA 10mm 206770-12M Compression fitting VA 12mm 206770-15M Compression fitting VA 15mm 206770-18M Compression fitting VA 18mm
2827 Cylinder pressure reducer Vulkan LHR 200/100 BSP Helium DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 100 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 160/100 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20676026 G1/2RHak according to EN 560 20676026-800 External thread G1/4" RHk according to EN560 20676026-870 External thread G3/8" RHk according to EN 560 20676026-6M Compression fitting VA 6mm 20676026-8M Compression fitting VA 8mm 20676026-10M Compression fitting VA 10mm 20676026-12M Compression fitting VA 12mm 20676026-15M Compression fitting VA 15mm 20676026-18M compression fitting VA 18mm
2828 Cylinder pressure reducer Vulkan LHR 200/100 BSP Helium DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 100 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 160/100 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20676026 G1/2RHak according to EN 560 20676026-800 External thread G1/4" RHk according to EN560 20676026-870 External thread G3/8" RHk according to EN 560 20676026-6M Compression fitting VA 6mm 20676026-8M Compression fitting VA 8mm 20676026-10M Compression fitting VA 10mm 20676026-12M Compression fitting VA 12mm 20676026-15M Compression fitting VA 15mm 20676026-18M compression fitting VA 18mm
2829 Cylinder pressure reducer Vulkan LHR 200/100 BSP Helium DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 100 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 160/100 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20676026 G1/2RHak according to EN 560 20676026-800 External thread G1/4" RHk according to EN560 20676026-870 External thread G3/8" RHk according to EN 560 20676026-6M Compression fitting VA 6mm 20676026-8M Compression fitting VA 8mm 20676026-10M Compression fitting VA 10mm 20676026-12M Compression fitting VA 12mm 20676026-15M Compression fitting VA 15mm 20676026-18M compression fitting VA 18mm
2830 Cylinder pressure reducer Vulkan LHR 200/100 BSP Helium DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 100 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 160/100 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20676026 G1/2RHak according to EN 560 20676026-800 External thread G1/4" RHk according to EN560 20676026-870 External thread G3/8" RHk according to EN 560 20676026-6M Compression fitting VA 6mm 20676026-8M Compression fitting VA 8mm 20676026-10M Compression fitting VA 10mm 20676026-12M Compression fitting VA 12mm 20676026-15M Compression fitting VA 15mm 20676026-18M compression fitting VA 18mm
2831 Cylinder pressure reducer Vulkan LHR 200/100 BSP Helium DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 100 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 160/100 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20676026 G1/2RHak according to EN 560 20676026-800 External thread G1/4" RHk according to EN560 20676026-870 External thread G3/8" RHk according to EN 560 20676026-6M Compression fitting VA 6mm 20676026-8M Compression fitting VA 8mm 20676026-10M Compression fitting VA 10mm 20676026-12M Compression fitting VA 12mm 20676026-15M Compression fitting VA 15mm 20676026-18M compression fitting VA 18mm
2832 Vulkan LHR 200/100 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8 x 1/14 RH U-nut according to DIN 477-1. Outlet: G1/2 RH. Hook according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available, among others. in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206760 G1/2RHak according to EN 560 206760-800 External thread G1/4" RHk according to EN560 206760-870 External thread G3/8" RHk according to EN 560 206760-6M Compression fitting VA 6mm 206760-8M Compression fitting VA 8mm 206760-10M Compression fitting VA 10mm 206760-12M Compression fitting VA 12mm 206760-15M Compression fitting VA 15mm 206760-18M Compression fitting VA 18mm
2833 Vulkan LHR 200/100 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8 x 1/14 RH U-nut according to DIN 477-1. Outlet: G1/2 RH. Hook according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available, among others. in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206760 G1/2RHak according to EN 560 206760-800 External thread G1/4" RHk according to EN560 206760-870 External thread G3/8" RHk according to EN 560 206760-6M Compression fitting VA 6mm 206760-8M Compression fitting VA 8mm 206760-10M Compression fitting VA 10mm 206760-12M Compression fitting VA 12mm 206760-15M Compression fitting VA 15mm 206760-18M Compression fitting VA 18mm
2834 Vulkan LHR 200/100 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8 x 1/14 RH U-nut according to DIN 477-1. Outlet: G1/2 RH. Hook according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available, among others. in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206760 G1/2RHak according to EN 560 206760-800 External thread G1/4" RHk according to EN560 206760-870 External thread G3/8" RHk according to EN 560 206760-6M Compression fitting VA 6mm 206760-8M Compression fitting VA 8mm 206760-10M Compression fitting VA 10mm 206760-12M Compression fitting VA 12mm 206760-15M Compression fitting VA 15mm 206760-18M Compression fitting VA 18mm
2835 Vulkan LHR 200/100 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8 x 1/14 RH U-nut according to DIN 477-1. Outlet: G1/2 RH. Hook according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available, among others. in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206760 G1/2RHak according to EN 560 206760-800 External thread G1/4" RHk according to EN560 206760-870 External thread G3/8" RHk according to EN 560 206760-6M Compression fitting VA 6mm 206760-8M Compression fitting VA 8mm 206760-10M Compression fitting VA 10mm 206760-12M Compression fitting VA 12mm 206760-15M Compression fitting VA 15mm 206760-18M Compression fitting VA 18mm
2841 Main pressure reducer Vulkan H60/200 Effect Argon DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 206560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 206560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 206560-8M for pure Gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
2842 Main pressure reducer Vulkan H60/200 Effect Argon DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 206560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 206560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 206560-8M for pure Gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
2843 Main pressure reducer Vulkan H60/200 Effect Argon DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 206560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 206560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 206560-8M for pure Gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
2844 Main pressure reducer Vulkan H60/200 Effect Argon DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 206560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 206560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 206560-8M for pure Gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
2928 Vulkan LHR 200/200 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10 - 200 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 200 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 204770 G1/2RHak according to EN 560 204770-800 External thread G1/4" RHk according to EN560 204770-870 External thread G3/8" RHk according to EN 560 204770-6M Compression fitting VA 6mm 204770-8M Compression fitting VA 8mm 204770-10M Compression fitting VA 10mm 204770-12M Compression fitting VA 12mm 204770-15M Compression fitting VA 15mm 204770-18M Compression fitting VA 18mm
2929 Vulkan LHR 200/200 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10 - 200 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 200 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 204770 G1/2RHak according to EN 560 204770-800 External thread G1/4" RHk according to EN560 204770-870 External thread G3/8" RHk according to EN 560 204770-6M Compression fitting VA 6mm 204770-8M Compression fitting VA 8mm 204770-10M Compression fitting VA 10mm 204770-12M Compression fitting VA 12mm 204770-15M Compression fitting VA 15mm 204770-18M Compression fitting VA 18mm
2930 Vulkan LHR 200/200 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10 - 200 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 200 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 204770 G1/2RHak according to EN 560 204770-800 External thread G1/4" RHk according to EN560 204770-870 External thread G3/8" RHk according to EN 560 204770-6M Compression fitting VA 6mm 204770-8M Compression fitting VA 8mm 204770-10M Compression fitting VA 10mm 204770-12M Compression fitting VA 12mm 204770-15M Compression fitting VA 15mm 204770-18M Compression fitting VA 18mm
2931 Vulkan LHR 200/200 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10 - 200 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 200 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 204770 G1/2RHak according to EN 560 204770-800 External thread G1/4" RHk according to EN560 204770-870 External thread G3/8" RHk according to EN 560 204770-6M Compression fitting VA 6mm 204770-8M Compression fitting VA 8mm 204770-10M Compression fitting VA 10mm 204770-12M Compression fitting VA 12mm 204770-15M Compression fitting VA 15mm 204770-18M Compression fitting VA 18mm
2932 Vulkan LHR 200/200 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10 - 200 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 200 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 204770 G1/2RHak according to EN 560 204770-800 External thread G1/4" RHk according to EN560 204770-870 External thread G3/8" RHk according to EN 560 204770-6M Compression fitting VA 6mm 204770-8M Compression fitting VA 8mm 204770-10M Compression fitting VA 10mm 204770-12M Compression fitting VA 12mm 204770-15M Compression fitting VA 15mm 204770-18M Compression fitting VA 18mm
3024 Vulkan LHR 200/200 BSP nitrogen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 200 bar adjustable, maximum output: 380 Nm³/h air at 50 bar outlet pressure. Inlet: W 24.32 x 1/14 RH U-nut according to DIN 477-1, outlet: G1/2 RH, threaded connection according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 203770 G1/2RHak according to EN 560 203770-800 External thread G1/4" RHk according to EN560 203770-870 External thread G3/8" RHk according to EN 560 203770-6M Compression fitting VA 6mm 203770-8M Compression fitting VA 8mm 203770-10M Compression fitting VA 10mm 203770-12M Compression fitting VA 12mm 203770-15M Compression fitting VA 15mm 203770-18M Compression fitting VA 18mm
3025 Vulkan LHR 200/200 BSP nitrogen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 200 bar adjustable, maximum output: 380 Nm³/h air at 50 bar outlet pressure. Inlet: W 24.32 x 1/14 RH U-nut according to DIN 477-1, outlet: G1/2 RH, threaded connection according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 203770 G1/2RHak according to EN 560 203770-800 External thread G1/4" RHk according to EN560 203770-870 External thread G3/8" RHk according to EN 560 203770-6M Compression fitting VA 6mm 203770-8M Compression fitting VA 8mm 203770-10M Compression fitting VA 10mm 203770-12M Compression fitting VA 12mm 203770-15M Compression fitting VA 15mm 203770-18M Compression fitting VA 18mm
3026 Vulkan LHR 200/200 BSP nitrogen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 200 bar adjustable, maximum output: 380 Nm³/h air at 50 bar outlet pressure. Inlet: W 24.32 x 1/14 RH U-nut according to DIN 477-1, outlet: G1/2 RH, threaded connection according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 203770 G1/2RHak according to EN 560 203770-800 External thread G1/4" RHk according to EN560 203770-870 External thread G3/8" RHk according to EN 560 203770-6M Compression fitting VA 6mm 203770-8M Compression fitting VA 8mm 203770-10M Compression fitting VA 10mm 203770-12M Compression fitting VA 12mm 203770-15M Compression fitting VA 15mm 203770-18M Compression fitting VA 18mm
3027 Vulkan LHR 200/200 BSP nitrogen cylinder pressure reducer DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 200 bar adjustable, maximum output: 380 Nm³/h air at 50 bar outlet pressure. Inlet: W 24.32 x 1/14 RH U-nut according to DIN 477-1, outlet: G1/2 RH, threaded connection according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 203770 G1/2RHak according to EN 560 203770-800 External thread G1/4" RHk according to EN560 203770-870 External thread G3/8" RHk according to EN 560 203770-6M Compression fitting VA 6mm 203770-8M Compression fitting VA 8mm 203770-10M Compression fitting VA 10mm 203770-12M Compression fitting VA 12mm 203770-15M Compression fitting VA 15mm 203770-18M Compression fitting VA 18mm
3028 Vulkan LHR 200/100 BSP nitrogen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 100 bar adjustable, maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W 24.32 x 1/14 RH U-nut according to DIN 477-1, outlet: G1/2 RHk according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 203760 G1/2RHak according to EN 560 203760-800 External thread G1/4" RHk according to EN560 203760-870 External thread G3/8" RHk according to EN 560 203760-6M Compression fitting VA 6mm 203760-8M Compression fitting VA 8mm 203760-10M Compression fitting VA 10mm 203760-12M Compression fitting VA 12mm 203760-15M Compression fitting VA 15mm 203760-18M Compression fitting VA 18mm
3029 Vulkan LHR 200/100 BSP nitrogen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 100 bar adjustable, maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W 24.32 x 1/14 RH U-nut according to DIN 477-1, outlet: G1/2 RHk according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 203760 G1/2RHak according to EN 560 203760-800 External thread G1/4" RHk according to EN560 203760-870 External thread G3/8" RHk according to EN 560 203760-6M Compression fitting VA 6mm 203760-8M Compression fitting VA 8mm 203760-10M Compression fitting VA 10mm 203760-12M Compression fitting VA 12mm 203760-15M Compression fitting VA 15mm 203760-18M Compression fitting VA 18mm
3030 Vulkan LHR 200/100 BSP nitrogen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 100 bar adjustable, maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W 24.32 x 1/14 RH U-nut according to DIN 477-1, outlet: G1/2 RHk according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 203760 G1/2RHak according to EN 560 203760-800 External thread G1/4" RHk according to EN560 203760-870 External thread G3/8" RHk according to EN 560 203760-6M Compression fitting VA 6mm 203760-8M Compression fitting VA 8mm 203760-10M Compression fitting VA 10mm 203760-12M Compression fitting VA 12mm 203760-15M Compression fitting VA 15mm 203760-18M Compression fitting VA 18mm
3031 Vulkan LHR 200/100 BSP nitrogen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 100 bar adjustable, maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W 24.32 x 1/14 RH U-nut according to DIN 477-1, outlet: G1/2 RHk according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 203760 G1/2RHak according to EN 560 203760-800 External thread G1/4" RHk according to EN560 203760-870 External thread G3/8" RHk according to EN 560 203760-6M Compression fitting VA 6mm 203760-8M Compression fitting VA 8mm 203760-10M Compression fitting VA 10mm 203760-12M Compression fitting VA 12mm 203760-15M Compression fitting VA 15mm 203760-18M Compression fitting VA 18mm
3032 Vulkan LHR 200/100 BSP nitrogen cylinder pressure reducer DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, outlet pressure: 10 - 100 bar adjustable, maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet: W 24.32 x 1/14 RH U-nut according to DIN 477-1, outlet: G1/2 RHk according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 160/100 bar, width x height x depth: 180 x 140 x 190 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 203760 G1/2RHak according to EN 560 203760-800 External thread G1/4" RHk according to EN560 203760-870 External thread G3/8" RHk according to EN 560 203760-6M Compression fitting VA 6mm 203760-8M Compression fitting VA 8mm 203760-10M Compression fitting VA 10mm 203760-12M Compression fitting VA 12mm 203760-15M Compression fitting VA 15mm 203760-18M Compression fitting VA 18mm
3300 Main pressure reducer Vulkan HA5/25 Acetylene 0-1.5 bar, 5 Nm?/h<br />Standards & Design:<br /><br />according to ISO 7291, single-stage design, burnout tested according to ISO 2503, with safety pressure gauges according to DIN EN ISO 5171<br />according to EN 560<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 25 bar<br />• outlet pressure<br />• Output pressure: 0-1<br />• Inlet: G3/4LHf U-nut<br />• Outlet: G1/2RHak according to EN 560<br />• Inlet pressure gauge: 0-40/25 bar<br />• Outlet pressure gauge: 0-2<br /><br />Dimensions:<br /><br />Width x Height x Depth: 200 x 190 x 75 mm
3301 Main pressure reducer Vulkan HA10/25 Acetylene 0-1.5 bar, 10 Nm?/h<br />Standards & Design:<br /><br />according to ISO 7291, single-stage design, burnout tested according to ISO 2503, with safety pressure gauges according to DIN EN ISO 5171<br />according to EN 560<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 25 bar<br />• outlet pressure<br />• Output pressure: 0-1<br />• Inlet: G3/4LHf U-nut<br />• Outlet: G1/2RHak according to EN 560<br />• Inlet pressure gauge: 0-40/25 bar<br />• Outlet pressure gauge: 0-2<br /><br />Dimensions:<br /><br />Width x Height x Depth: 190 x 185 x 75 mm
3722 Main pressure reducer Vulkan H20/300 Effect oxygen, 0-20 bar for Vareo EB/BS 60 according to DIN EN ISO 7291, single-stage design, burnout tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, with safety pressure gauges according to DIN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 – 20 bar adjustable. Maximum output: 75 Nm³/h compressed air at 20 bar outlet pressure. Inlet: M 24x1.5 RHf U-nut. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 40/20 bar. Width x Height x Depth: 210 x 190 x 75 mm. *****NOTE***** Replacement pressure reducer for pressure control stations BS60, SE20, and EB60. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5348 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
5349 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
5350 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
5351 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
5352 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
5785 Main pressure reducer Vulkan H60/200 Effect CO2 DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 20656006 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 20656006-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 20656006-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 20656006-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 20656006-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 20656006-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 20656006-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 20656006-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 20656006-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5786 Main pressure reducer Vulkan H60/200 Effect CO2 DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 20656006 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 20656006-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 20656006-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 20656006-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 20656006-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 20656006-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 20656006-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 20656006-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 20656006-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5787 Main pressure reducer Vulkan H60/200 Effect CO2 DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 20656006 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 20656006-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 20656006-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 20656006-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 20656006-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 20656006-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 20656006-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 20656006-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 20656006-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5788 Main pressure reducer Vulkan H60/200 Effect CO2 DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 20656006 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 20656006-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 20656006-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 20656006-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 20656006-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 20656006-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 20656006-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 20656006-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 20656006-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5789 Main pressure reducer Vulkan H60/200 Effect CO2 DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 20656006 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 20656006-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 20656006-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 20656006-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 20656006-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 20656006-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 20656006-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 20656006-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 20656006-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5807 Main finned pressure reducer Vulkan HR60/200 EFFECT fuel gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1, No. 1, Outlet: G1/2 RHak according to EN 560, blow-off line connection: G3/8 RHak, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 204568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 204568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 204568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 204568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 204568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 204568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 204568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 204568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 204568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 204568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 204568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5819 Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M ​​For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6219 Main pressure reducer Vulkan H10/300 Effect nitrogen for SE 10, 0 - 10 bar according to ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Maximum inlet pressure: 300 bar, Output pressure: 0 - 10 bar adjustable, Maximum output: 50 Nm³/h compressed air at 10 bar outlet pressure. Inlet: M24x1.5 RHf U-nut, Outlet: G1/2 RHk U-nut according to EN 560, Inlet pressure gauge: 0 - 400/300 bar, Outlet pressure gauge: 0 - 16/10 bar, Width x Height x Depth: 210 x 190 x 75 mm *****NOTE***** Replacement pressure reducer for stationary single cylinder system SE10. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please state the system number when ordering. This main pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321 (1.4541).
6352 Main pressure reducer Vulkan H60/200 Effect compressed air DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: G 5/8 RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (extra charge): Item numberGas purityOutlet connection 207560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 207560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 207560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 207560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 207560-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 207560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 207560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 207560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 207560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6353 Main pressure reducer Vulkan H60/200 Effect compressed air DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: G 5/8 RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (extra charge): Item numberGas purityOutlet connection 207560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 207560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 207560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 207560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 207560-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 207560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 207560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 207560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 207560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6354 Main pressure reducer Vulkan H60/200 Effect compressed air DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: G 5/8 RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (extra charge): Item numberGas purityOutlet connection 207560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 207560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 207560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 207560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 207560-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 207560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 207560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 207560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 207560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6355 Main pressure reducer Vulkan H60/200 Effect compressed air DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: G 5/8 RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (extra charge): Item numberGas purityOutlet connection 207560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 207560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 207560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 207560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 207560-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 207560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 207560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 207560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 207560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6356 Main pressure reducer Vulkan H60/200 Effect compressed air DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: G 5/8 RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (extra charge): Item numberGas purityOutlet connection 207560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 207560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 207560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 207560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 207560-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 207560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 207560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 207560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 207560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6408 Vulkan LHR 200/200 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1. Outlet: G1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206770 G1/2RHak according to EN 560 206770-800 External thread G1/4" RHk according to EN560 206770-870 External thread G3/8" RHk according to EN 560 206770-6M Compression fitting VA 6mm 206770-8M Compression fitting VA 8mm 206770-10M Compression fitting VA 10mm 206770-12M Compression fitting VA 12mm 206770-15M Compression fitting VA 15mm 206770-18M Compression fitting VA 18mm
6409 Vulkan LHR 200/200 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1. Outlet: G1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206770 G1/2RHak according to EN 560 206770-800 External thread G1/4" RHk according to EN560 206770-870 External thread G3/8" RHk according to EN 560 206770-6M Compression fitting VA 6mm 206770-8M Compression fitting VA 8mm 206770-10M Compression fitting VA 10mm 206770-12M Compression fitting VA 12mm 206770-15M Compression fitting VA 15mm 206770-18M Compression fitting VA 18mm
6410 Vulkan LHR 200/200 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1. Outlet: G1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206770 G1/2RHak according to EN 560 206770-800 External thread G1/4" RHk according to EN560 206770-870 External thread G3/8" RHk according to EN 560 206770-6M Compression fitting VA 6mm 206770-8M Compression fitting VA 8mm 206770-10M Compression fitting VA 10mm 206770-12M Compression fitting VA 12mm 206770-15M Compression fitting VA 15mm 206770-18M Compression fitting VA 18mm
6411 Vulkan LHR 200/200 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1. Outlet: G1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206770 G1/2RHak according to EN 560 206770-800 External thread G1/4" RHk according to EN560 206770-870 External thread G3/8" RHk according to EN 560 206770-6M Compression fitting VA 6mm 206770-8M Compression fitting VA 8mm 206770-10M Compression fitting VA 10mm 206770-12M Compression fitting VA 12mm 206770-15M Compression fitting VA 15mm 206770-18M Compression fitting VA 18mm
6412 Vulkan LHR 200/200 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 200 bar. Output: 380 Nm³/h air at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1. Outlet: G1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 315/200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206770 G1/2RHak according to EN 560 206770-800 External thread G1/4" RHk according to EN560 206770-870 External thread G3/8" RHk according to EN 560 206770-6M Compression fitting VA 6mm 206770-8M Compression fitting VA 8mm 206770-10M Compression fitting VA 10mm 206770-12M Compression fitting VA 12mm 206770-15M Compression fitting VA 15mm 206770-18M Compression fitting VA 18mm
6413 Cylinder pressure reducer Vulkan LHR 200/100 BSP Helium DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 100 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 160/100 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20676026 G1/2RHak according to EN 560 20676026-800 External thread G1/4" RHk according to EN560 20676026-870 External thread G3/8" RHk according to EN 560 20676026-6M Compression fitting VA 6mm 20676026-8M Compression fitting VA 8mm 20676026-10M Compression fitting VA 10mm 20676026-12M Compression fitting VA 12mm 20676026-15M Compression fitting VA 15mm 20676026-18M compression fitting VA 18mm
6414 Cylinder pressure reducer Vulkan LHR 200/100 BSP Helium DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 100 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 160/100 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20676026 G1/2RHak according to EN 560 20676026-800 External thread G1/4" RHk according to EN560 20676026-870 External thread G3/8" RHk according to EN 560 20676026-6M Compression fitting VA 6mm 20676026-8M Compression fitting VA 8mm 20676026-10M Compression fitting VA 10mm 20676026-12M Compression fitting VA 12mm 20676026-15M Compression fitting VA 15mm 20676026-18M compression fitting VA 18mm
6415 Cylinder pressure reducer Vulkan LHR 200/100 BSP Helium DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 100 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 160/100 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20676026 G1/2RHak according to EN 560 20676026-800 External thread G1/4" RHk according to EN560 20676026-870 External thread G3/8" RHk according to EN 560 20676026-6M Compression fitting VA 6mm 20676026-8M Compression fitting VA 8mm 20676026-10M Compression fitting VA 10mm 20676026-12M Compression fitting VA 12mm 20676026-15M Compression fitting VA 15mm 20676026-18M compression fitting VA 18mm
6416 Cylinder pressure reducer Vulkan LHR 200/100 BSP Helium DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, Max. inlet pressure: 200 bar, Adjustable outlet pressure: 10 - 100 bar, Output: 380 Nm?/h air at 50 bar outlet pressure and 300 bar pre-pressure, Inlet: W21.8x1/14RHf U-nut according to DIN 477-1, Outlet: External thread G1/2RHak according to DIN EN 560, Inlet pressure gauge: 0 - 315/200 bar, Outlet pressure gauge: 0 - 160/100 bar, Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is suitable for, among other things, Available in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 20676026 G1/2RHak according to EN 560 20676026-800 External thread G1/4" RHk according to EN560 20676026-870 External thread G3/8" RHk according to EN 560 20676026-6M Compression fitting VA 6mm 20676026-8M Compression fitting VA 8mm 20676026-10M Compression fitting VA 10mm 20676026-12M Compression fitting VA 12mm 20676026-15M Compression fitting VA 15mm 20676026-18M compression fitting VA 18mm
6417 Vulkan LHR 200/100 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8 x 1/14 RH U-nut according to DIN 477-1. Outlet: G1/2 RH. Hook according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available, among others. in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206760 G1/2RHak according to EN 560 206760-800 External thread G1/4" RHk according to EN560 206760-870 External thread G3/8" RHk according to EN 560 206760-6M Compression fitting VA 6mm 206760-8M Compression fitting VA 8mm 206760-10M Compression fitting VA 10mm 206760-12M Compression fitting VA 12mm 206760-15M Compression fitting VA 15mm 206760-18M Compression fitting VA 18mm
6418 Vulkan LHR 200/100 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8 x 1/14 RH U-nut according to DIN 477-1. Outlet: G1/2 RH. Hook according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available, among others. in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206760 G1/2RHak according to EN 560 206760-800 External thread G1/4" RHk according to EN560 206760-870 External thread G3/8" RHk according to EN 560 206760-6M Compression fitting VA 6mm 206760-8M Compression fitting VA 8mm 206760-10M Compression fitting VA 10mm 206760-12M Compression fitting VA 12mm 206760-15M Compression fitting VA 15mm 206760-18M Compression fitting VA 18mm
6419 Vulkan LHR 200/100 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8 x 1/14 RH U-nut according to DIN 477-1. Outlet: G1/2 RH. Hook according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available, among others. in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206760 G1/2RHak according to EN 560 206760-800 External thread G1/4" RHk according to EN560 206760-870 External thread G3/8" RHk according to EN 560 206760-6M Compression fitting VA 6mm 206760-8M Compression fitting VA 8mm 206760-10M Compression fitting VA 10mm 206760-12M Compression fitting VA 12mm 206760-15M Compression fitting VA 15mm 206760-18M Compression fitting VA 18mm
6420 Vulkan LHR 200/100 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8 x 1/14 RH U-nut according to DIN 477-1. Outlet: G1/2 RH. Hook according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available, among others. in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206760 G1/2RHak according to EN 560 206760-800 External thread G1/4" RHk according to EN560 206760-870 External thread G3/8" RHk according to EN 560 206760-6M Compression fitting VA 6mm 206760-8M Compression fitting VA 8mm 206760-10M Compression fitting VA 10mm 206760-12M Compression fitting VA 12mm 206760-15M Compression fitting VA 15mm 206760-18M Compression fitting VA 18mm
6421 Vulkan LHR 200/100 BSP cylinder pressure reducer for inert gases DIN 477-1, 10 - 100 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Adjustable outlet pressure: 10 - 100 bar. Output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar inlet pressure. Inlet: W21.8 x 1/14 RH U-nut according to DIN 477-1. Outlet: G1/2 RH. Hook according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 160/100 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available, among others. in the following versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 206760 G1/2RHak according to EN 560 206760-800 External thread G1/4" RHk according to EN560 206760-870 External thread G3/8" RHk according to EN 560 206760-6M Compression fitting VA 6mm 206760-8M Compression fitting VA 8mm 206760-10M Compression fitting VA 10mm 206760-12M Compression fitting VA 12mm 206760-15M Compression fitting VA 15mm 206760-18M Compression fitting VA 18mm
6426 Main pressure reducer Vulkan H60/200 Effect Argon DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 206560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 206560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 206560-8M for pure Gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6427 Main pressure reducer Vulkan H60/200 Effect Argon DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 206560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 206560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 206560-8M for pure Gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6428 Main pressure reducer Vulkan H60/200 Effect Argon DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 206560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 206560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 206560-8M for pure Gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6429 Main pressure reducer Vulkan H60/200 Effect Argon DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 206560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 206560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 206560-8M for pure Gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6430 Main pressure reducer Vulkan H60/200 Effect Argon DIN 477-1, 0-60 bar, 140 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-60 bar adjustable. Maximum output: 140 Nm?/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/60 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206560 for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206560-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G1/4" RHk according to EN560 206560-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) External thread G3/8" RHk according to EN 560 206560-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) Compression fitting VA 6mm 206560-8M for pure Gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206560-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206560-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206560-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206560-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6513 Vulkan LHR 200/200 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10 - 200 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 200 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 204770 G1/2RHak according to EN 560 204770-800 External thread G1/4" RHk according to EN560 204770-870 External thread G3/8" RHk according to EN 560 204770-6M Compression fitting VA 6mm 204770-8M Compression fitting VA 8mm 204770-10M Compression fitting VA 10mm 204770-12M Compression fitting VA 12mm 204770-15M Compression fitting VA 15mm 204770-18M Compression fitting VA 18mm
6514 Vulkan LHR 200/200 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10 - 200 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 200 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 204770 G1/2RHak according to EN 560 204770-800 External thread G1/4" RHk according to EN560 204770-870 External thread G3/8" RHk according to EN 560 204770-6M Compression fitting VA 6mm 204770-8M Compression fitting VA 8mm 204770-10M Compression fitting VA 10mm 204770-12M Compression fitting VA 12mm 204770-15M Compression fitting VA 15mm 204770-18M Compression fitting VA 18mm
6515 Vulkan LHR 200/200 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10 - 200 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 200 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 204770 G1/2RHak according to EN 560 204770-800 External thread G1/4" RHk according to EN560 204770-870 External thread G3/8" RHk according to EN 560 204770-6M Compression fitting VA 6mm 204770-8M Compression fitting VA 8mm 204770-10M Compression fitting VA 10mm 204770-12M Compression fitting VA 12mm 204770-15M Compression fitting VA 15mm 204770-18M Compression fitting VA 18mm
6516 Vulkan LHR 200/200 BSP cylinder pressure reducer for fuel gases DIN 477-1, 10 - 200 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 200 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W21.8x1/14LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x Height x Depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutput connection 204770 G1/2RHak according to EN 560 204770-800 External thread G1/4" RHk according to EN560 204770-870 External thread G3/8" RHk according to EN 560 204770-6M Compression fitting VA 6mm 204770-8M Compression fitting VA 8mm 204770-10M Compression fitting VA 10mm 204770-12M Compression fitting VA 12mm 204770-15M Compression fitting VA 15mm 204770-18M Compression fitting VA 18mm
6605 <p>Cylinder pressure reducer Vulkan F15/2 200 test gases DIN 477-1, 0 - 1.5 bar according to DIN EN ISO 2503, Class 3, two-stage design, TÜV type-tested in accordance with Pressure Equipment Directive 97/23/EC, with safety pressure gauges according to DIN EN ISO 5171, with shut-off valve. Maximum inlet pressure: 200 bar. Output pressure: 0 - 1.5 bar adjustable. Maximum output: 8 Nm³/h air at 1.5 bar outlet pressure. Inlet: M19x1.5LH U-nut according to DIN 477-1 No. 14. Outlet: G3/8LHk x 9mm nozzle according to DIN EN 560. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 2.5 / 1.5 bar. Width x Height x Depth: 240 x 190 x 75 mm This cylinder pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - hose nozzle G3/8" LHk x 9mm Options (surcharge): Order number Gas purity/membrane Outlet screw connection 203851 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 9mm 203851-815 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 6mm 203851-814 for technical gases up to 4.5, with standard membrane External thread G3/8" LHk according to EN 560 203851-838 for technical gases up to 4.5, with standard membrane External thread G1/2" LHk according to EN 560 203851-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 203851-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 203851-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 203851-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 203851-2 for technical gases up to 4.5, with standard membrane Compression fitting VA 1/8" 203851-4 for technical gases up to 4.5, with Standard diaphragm compression fitting VA 1/4" 203851-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 203851-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 203851-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 203851-MM-838 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G1/2" LHk according to EN 560 203851-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 203851-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 203851-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 203851-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 203851-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 203851-MM-4 for pure gases up to 5.0, with Metal membrane SS321 (1.4541) compression fitting VA 1/4"</p>
6606 <p>Cylinder pressure reducer Vulkan F15/2 200 test gases DIN 477-1, 0 - 1.5 bar according to DIN EN ISO 2503, Class 3, two-stage design, TÜV type-tested in accordance with Pressure Equipment Directive 97/23/EC, with safety pressure gauges according to DIN EN ISO 5171, with shut-off valve. Maximum inlet pressure: 200 bar. Output pressure: 0 - 1.5 bar adjustable. Maximum output: 8 Nm³/h air at 1.5 bar outlet pressure. Inlet: M19x1.5LH U-nut according to DIN 477-1 No. 14. Outlet: G3/8LHk x 9mm nozzle according to DIN EN 560. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 2.5 / 1.5 bar. Width x Height x Depth: 240 x 190 x 75 mm This cylinder pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - hose nozzle G3/8" LHk x 9mm Options (surcharge): Order number Gas purity/membrane Outlet screw connection 203851 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 9mm 203851-815 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 6mm 203851-814 for technical gases up to 4.5, with standard membrane External thread G3/8" LHk according to EN 560 203851-838 for technical gases up to 4.5, with standard membrane External thread G1/2" LHk according to EN 560 203851-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 203851-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 203851-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 203851-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 203851-2 for technical gases up to 4.5, with standard membrane Compression fitting VA 1/8" 203851-4 for technical gases up to 4.5, with Standard diaphragm compression fitting VA 1/4" 203851-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 203851-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 203851-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 203851-MM-838 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G1/2" LHk according to EN 560 203851-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 203851-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 203851-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 203851-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 203851-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 203851-MM-4 for pure gases up to 5.0, with Metal membrane SS321 (1.4541) compression fitting VA 1/4"</p>
6607 <p>Cylinder pressure reducer Vulkan F15/2 200 test gases DIN 477-1, 0 - 1.5 bar according to DIN EN ISO 2503, Class 3, two-stage design, TÜV type-tested in accordance with Pressure Equipment Directive 97/23/EC, with safety pressure gauges according to DIN EN ISO 5171, with shut-off valve. Maximum inlet pressure: 200 bar. Output pressure: 0 - 1.5 bar adjustable. Maximum output: 8 Nm³/h air at 1.5 bar outlet pressure. Inlet: M19x1.5LH U-nut according to DIN 477-1 No. 14. Outlet: G3/8LHk x 9mm nozzle according to DIN EN 560. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 2.5 / 1.5 bar. Width x Height x Depth: 240 x 190 x 75 mm This cylinder pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - hose nozzle G3/8" LHk x 9mm Options (surcharge): Order number Gas purity/membrane Outlet screw connection 203851 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 9mm 203851-815 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 6mm 203851-814 for technical gases up to 4.5, with standard membrane External thread G3/8" LHk according to EN 560 203851-838 for technical gases up to 4.5, with standard membrane External thread G1/2" LHk according to EN 560 203851-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 203851-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 203851-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 203851-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 203851-2 for technical gases up to 4.5, with standard membrane Compression fitting VA 1/8" 203851-4 for technical gases up to 4.5, with Standard diaphragm compression fitting VA 1/4" 203851-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 203851-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 203851-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 203851-MM-838 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G1/2" LHk according to EN 560 203851-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 203851-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 203851-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 203851-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 203851-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 203851-MM-4 for pure gases up to 5.0, with Metal membrane SS321 (1.4541) compression fitting VA 1/4"</p>
6608 <p>Cylinder pressure reducer Vulkan F15/2 200 test gases DIN 477-1, 0 - 1.5 bar according to DIN EN ISO 2503, Class 3, two-stage design, TÜV type-tested in accordance with Pressure Equipment Directive 97/23/EC, with safety pressure gauges according to DIN EN ISO 5171, with shut-off valve. Maximum inlet pressure: 200 bar. Output pressure: 0 - 1.5 bar adjustable. Maximum output: 8 Nm³/h air at 1.5 bar outlet pressure. Inlet: M19x1.5LH U-nut according to DIN 477-1 No. 14. Outlet: G3/8LHk x 9mm nozzle according to DIN EN 560. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 2.5 / 1.5 bar. Width x Height x Depth: 240 x 190 x 75 mm This cylinder pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - hose nozzle G3/8" LHk x 9mm Options (surcharge): Order number Gas purity/membrane Outlet screw connection 203851 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 9mm 203851-815 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 6mm 203851-814 for technical gases up to 4.5, with standard membrane External thread G3/8" LHk according to EN 560 203851-838 for technical gases up to 4.5, with standard membrane External thread G1/2" LHk according to EN 560 203851-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 203851-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 203851-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 203851-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 203851-2 for technical gases up to 4.5, with standard membrane Compression fitting VA 1/8" 203851-4 for technical gases up to 4.5, with Standard diaphragm compression fitting VA 1/4" 203851-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 203851-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 203851-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 203851-MM-838 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G1/2" LHk according to EN 560 203851-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 203851-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 203851-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 203851-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 203851-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 203851-MM-4 for pure gases up to 5.0, with Metal membrane SS321 (1.4541) compression fitting VA 1/4"</p>
6609 <p>Cylinder pressure reducer Vulkan F15/2 200 test gases DIN 477-1, 0 - 1.5 bar according to DIN EN ISO 2503, Class 3, two-stage design, TÜV type-tested in accordance with Pressure Equipment Directive 97/23/EC, with safety pressure gauges according to DIN EN ISO 5171, with shut-off valve. Maximum inlet pressure: 200 bar. Output pressure: 0 - 1.5 bar adjustable. Maximum output: 8 Nm³/h air at 1.5 bar outlet pressure. Inlet: M19x1.5LH U-nut according to DIN 477-1 No. 14. Outlet: G3/8LHk x 9mm nozzle according to DIN EN 560. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 2.5 / 1.5 bar. Width x Height x Depth: 240 x 190 x 75 mm This cylinder pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - hose nozzle G3/8" LHk x 9mm Options (surcharge): Order number Gas purity/membrane Outlet screw connection 203851 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 9mm 203851-815 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 6mm 203851-814 for technical gases up to 4.5, with standard membrane External thread G3/8" LHk according to EN 560 203851-838 for technical gases up to 4.5, with standard membrane External thread G1/2" LHk according to EN 560 203851-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 203851-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 203851-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 203851-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 203851-2 for technical gases up to 4.5, with standard membrane Compression fitting VA 1/8" 203851-4 for technical gases up to 4.5, with Standard diaphragm compression fitting VA 1/4" 203851-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 203851-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 203851-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 203851-MM-838 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G1/2" LHk according to EN 560 203851-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 203851-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 203851-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 203851-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 203851-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 203851-MM-4 for pure gases up to 5.0, with Metal membrane SS321 (1.4541) compression fitting VA 1/4"</p>
6610 <p>Cylinder pressure reducer Vulkan F15/2 200 test gases DIN 477-1, 0 - 1.5 bar according to DIN EN ISO 2503, Class 3, two-stage design, TÜV type-tested in accordance with Pressure Equipment Directive 97/23/EC, with safety pressure gauges according to DIN EN ISO 5171, with shut-off valve. Maximum inlet pressure: 200 bar. Output pressure: 0 - 1.5 bar adjustable. Maximum output: 8 Nm³/h air at 1.5 bar outlet pressure. Inlet: M19x1.5LH U-nut according to DIN 477-1 No. 14. Outlet: G3/8LHk x 9mm nozzle according to DIN EN 560. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 2.5 / 1.5 bar. Width x Height x Depth: 240 x 190 x 75 mm This cylinder pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - hose nozzle G3/8" LHk x 9mm Options (surcharge): Order number Gas purity/membrane Outlet screw connection 203851 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 9mm 203851-815 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 6mm 203851-814 for technical gases up to 4.5, with standard membrane External thread G3/8" LHk according to EN 560 203851-838 for technical gases up to 4.5, with standard membrane External thread G1/2" LHk according to EN 560 203851-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 203851-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 203851-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 203851-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 203851-2 for technical gases up to 4.5, with standard membrane Compression fitting VA 1/8" 203851-4 for technical gases up to 4.5, with Standard diaphragm compression fitting VA 1/4" 203851-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 203851-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 203851-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 203851-MM-838 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G1/2" LHk according to EN 560 203851-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 203851-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 203851-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 203851-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 203851-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 203851-MM-4 for pure gases up to 5.0, with Metal membrane SS321 (1.4541) compression fitting VA 1/4"</p>
6611 <p>Cylinder pressure reducer Vulkan F15/2 200 test gases DIN 477-1, 0 - 1.5 bar according to DIN EN ISO 2503, Class 3, two-stage design, TÜV type-tested in accordance with Pressure Equipment Directive 97/23/EC, with safety pressure gauges according to DIN EN ISO 5171, with shut-off valve. Maximum inlet pressure: 200 bar. Output pressure: 0 - 1.5 bar adjustable. Maximum output: 8 Nm³/h air at 1.5 bar outlet pressure. Inlet: M19x1.5LH U-nut according to DIN 477-1 No. 14. Outlet: G3/8LHk x 9mm nozzle according to DIN EN 560. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 2.5 / 1.5 bar. Width x Height x Depth: 240 x 190 x 75 mm This cylinder pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - hose nozzle G3/8" LHk x 9mm Options (surcharge): Order number Gas purity/membrane Outlet screw connection 203851 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 9mm 203851-815 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 6mm 203851-814 for technical gases up to 4.5, with standard membrane External thread G3/8" LHk according to EN 560 203851-838 for technical gases up to 4.5, with standard membrane External thread G1/2" LHk according to EN 560 203851-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 203851-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 203851-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 203851-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 203851-2 for technical gases up to 4.5, with standard membrane Compression fitting VA 1/8" 203851-4 for technical gases up to 4.5, with Standard diaphragm compression fitting VA 1/4" 203851-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 203851-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 203851-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 203851-MM-838 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G1/2" LHk according to EN 560 203851-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 203851-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 203851-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 203851-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 203851-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 203851-MM-4 for pure gases up to 5.0, with Metal membrane SS321 (1.4541) compression fitting VA 1/4"</p>
6612 <p>Cylinder pressure reducer Vulkan F15/2 200 test gases DIN 477-1, 0 - 1.5 bar according to DIN EN ISO 2503, Class 3, two-stage design, TÜV type-tested in accordance with Pressure Equipment Directive 97/23/EC, with safety pressure gauges according to DIN EN ISO 5171, with shut-off valve. Maximum inlet pressure: 200 bar. Output pressure: 0 - 1.5 bar adjustable. Maximum output: 8 Nm³/h air at 1.5 bar outlet pressure. Inlet: M19x1.5LH U-nut according to DIN 477-1 No. 14. Outlet: G3/8LHk x 9mm nozzle according to DIN EN 560. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 2.5 / 1.5 bar. Width x Height x Depth: 240 x 190 x 75 mm This cylinder pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - hose nozzle G3/8" LHk x 9mm Options (surcharge): Order number Gas purity/membrane Outlet screw connection 203851 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 9mm 203851-815 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 6mm 203851-814 for technical gases up to 4.5, with standard membrane External thread G3/8" LHk according to EN 560 203851-838 for technical gases up to 4.5, with standard membrane External thread G1/2" LHk according to EN 560 203851-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 203851-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 203851-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 203851-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 203851-2 for technical gases up to 4.5, with standard membrane Compression fitting VA 1/8" 203851-4 for technical gases up to 4.5, with Standard diaphragm compression fitting VA 1/4" 203851-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 203851-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 203851-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 203851-MM-838 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G1/2" LHk according to EN 560 203851-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 203851-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 203851-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 203851-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 203851-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 203851-MM-4 for pure gases up to 5.0, with Metal membrane SS321 (1.4541) compression fitting VA 1/4"</p>
6613 <p>Cylinder pressure reducer Vulkan F15/2 200 test gases DIN 477-1, 0 - 1.5 bar according to DIN EN ISO 2503, Class 3, two-stage design, TÜV type-tested in accordance with Pressure Equipment Directive 97/23/EC, with safety pressure gauges according to DIN EN ISO 5171, with shut-off valve. Maximum inlet pressure: 200 bar. Output pressure: 0 - 1.5 bar adjustable. Maximum output: 8 Nm³/h air at 1.5 bar outlet pressure. Inlet: M19x1.5LH U-nut according to DIN 477-1 No. 14. Outlet: G3/8LHk x 9mm nozzle according to DIN EN 560. Inlet pressure gauge: 0 - 315 / 200 bar. Outlet pressure gauge: 0 - 2.5 / 1.5 bar. Width x Height x Depth: 240 x 190 x 75 mm This cylinder pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - hose nozzle G3/8" LHk x 9mm Options (surcharge): Order number Gas purity/membrane Outlet screw connection 203851 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 9mm 203851-815 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" LHk x 6mm 203851-814 for technical gases up to 4.5, with standard membrane External thread G3/8" LHk according to EN 560 203851-838 for technical gases up to 4.5, with standard membrane External thread G1/2" LHk according to EN 560 203851-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 203851-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 203851-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 203851-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 203851-2 for technical gases up to 4.5, with standard membrane Compression fitting VA 1/8" 203851-4 for technical gases up to 4.5, with Standard diaphragm compression fitting VA 1/4" 203851-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 203851-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 203851-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 203851-MM-838 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G1/2" LHk according to EN 560 203851-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 203851-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 203851-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 203851-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 203851-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 203851-MM-4 for pure gases up to 5.0, with Metal membrane SS321 (1.4541) compression fitting VA 1/4"</p>
6623 <p>Main pressure reducer Vulkan H40/200 Effect Nitrogen DIN 477-1, 0-40 bar, 120 Nm?/h according to DIN EN ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN 562. Maximum inlet pressure: 200 bar. Output pressure: 0-40 bar adjustable. Maximum output: 120 Nm?/h compressed air at 40 bar back pressure. Inlet: W24.32x1/14RHf U-nut according to DIN 477, Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0-315/200 bar. Outlet pressure gauge: 0-100/40 bar. Width x Height x Depth: 200 x 210 x 75 mm. This main pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 203540 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 203540-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 203540-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 203540-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 203540-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 203540-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 203540-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 203540-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 203540-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 203540-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 203540-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 203540-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 203540-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 203540-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 203540-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 203540-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 203540-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 203540-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm</p>
6641 Main pressure reducer Vulkan H20/200 Effect Nitrogen DIN 477-1, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm?/h at 20 bar back pressure. Inlet: W 24.32 x 1/14 RHf U-nut according to DIN 477-1. Outlet: G1/2 RHak according to EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 210 x 190 x 75 mm. This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 203520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 203520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 203520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 203520-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 203520-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 203520-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 203520-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 203520-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 203520-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 203520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 203520-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 203520-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 203520-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 203520-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 203520-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 203520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 203520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 203520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6847 Vulkan F15/200 Effect LabLine nitrogen cylinder pressure reducer 0-1.5 bar, fully chrome-plated with a metal diaphragm for gas purity 5.0, with pre-pressure compensation for constant back pressure under all operating conditions<br />Standards & Design:<br /><br />single-stage design, with shut-off valve, with safety gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br />according to DIN 477-1 No<br /><br />Functional elements:<br /><br />• shut-off valve, with safety gauges according to DIN EN ISO 5171, maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br /><br />Technical data:<br /><br />• maximum inlet pressure: 200 bar, adjustable outlet pressure: 0-1<br />• outlet pressure: 0-1<br />• output: 8 Nm³/h compressed air at 1<br />• Inlet: W24<br />• outlet: 6 mm stainless steel compression fitting<br /><br />Dimensions:<br /><br />Width x Height x Depth: 210 x 190 x 75 mm