Result
| product_id |
short_description |
full_description |
meta_keywords |
meta_description |
search_words |
promo_text |
unit_name |
| 12 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 13 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 14 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 15 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 16 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 17 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 18 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 65 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 66 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 67 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 303 |
|
Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-20 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-20 bar adjustable. Maximum output: 170 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas freedom/Membrane Inlet/outlet screw connection 10353020 for technical gases up to 4.5, with standard membrane Both sides. Internal thread G1/2" RHi 10353020-6M-6M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 6mm 10353020-8M-8M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 8mm 10353020-10M-10M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 10mm 10353020-12M-12M for technical gases up to 4.5, with standard membrane Both sides. Compression fitting VA 12mm 10353020-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353020-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353020-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353020-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353020-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353020-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353020-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353020-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353020-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm |
|
|
|
|
|
| 310 |
|
Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm |
|
|
|
|
|
| 317 |
|
Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm |
|
|
|
|
|
| 324 |
|
<p>Vulkan L10 line pressure reducer for compressed air G1/2RH both sides, 0-10 bar, based on ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0-10 bar, adjustable. Maximum output: 45 Nm³/h at 10 bar outlet pressure. Inlet: G1/2RHak according to EN 560. Outlet: G1/2RHak according to EN 560. Inlet pressure gauge: 0-40/20 bar. Outlet pressure gauge: 0-16/10 bar. Width x Height x Depth: 210 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (Surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order numberGas purity/membraneInlet/outlet screw connection 107529 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107529-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107529-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107529-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107529-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107529-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107529-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107529-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107529-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107529-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107529-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107529-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107529-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107529-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 331 |
|
<p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 338 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 3098 |
|
Vulkan LHR3 nitrogen line pressure reducer G 2RHi, 0.3 - 3.0 bar<br />Standards & Design:<br /><br />single-stage design, without pressure gauge<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 6 bar<br />• outlet pressure<br />• Output pressure: 0<br /><br />Dimensions:<br /><br />Width x Height x Depth: 240 x 300 x 240 mm |
|
|
|
|
|
| 3111 |
|
In-line dome pressure reducer Vulkan LD1 MD Helium G1RHi, 0.5 - 99 bar, both sides, not for carbon dioxide. Material: Brass/Viton<br />Standards & Design:<br /><br />Single-stage design<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 100 bar<br />• outlet pressure<br />• Output pressure: 0<br />• Inlet: Internal thread G1RHi<br />• Outlet: Internal thread G1RHi<br /><br />Dimensions:<br /><br />Width x Height x Depth: 130 x 170 x 130 mm |
|
|
|
|
|
| 3112 |
|
Line dome pressure reducer Vulkan LD1 MD inert gases G1RHi both sides. 0.5 - 99 bar not for carbon dioxide, material: brass / Viton<br />Standards & Design:<br /><br />single-stage design, maximum inlet pressure: 100 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 100 bar, output pressure: 0<br />• outlet pressure, input: internal thread G1RHi, output: internal thread G1RHi, input pressure gauge: without, output pressure gauge: without, width x height x depth: 130 x 170 x 130 mm<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 130 x 170 x 130 mm |
|
|
|
|
|
| 3115 |
|
Vulkan LHR3 nitrogen line pressure reducer G 2RHi, 0.3 - 3.0 bar<br />Standards & Design:<br /><br />single-stage design, without pressure gauge<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 6 bar<br />• outlet pressure<br />• Output pressure: 0<br /><br />Dimensions:<br /><br />Width x Height x Depth: 240 x 300 x 240 mm |
|
|
|
|
|
| 3116 |
|
Vulkan LH120 line pressure reducer for fuel gases G1RHi, both sides, 0 - 50 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 300 Nm³/h at 50 bar outlet pressure<br />• Inlet: internal thread G1RHi<br />• Outlet: internal thread G1RHi<br /><br />Dimensions:<br /><br />Width x Height x Depth: 132 x 295 x 132 mm |
|
|
|
|
|
| 3118 |
|
Line pressure reducer Vulkan LP216 Helium G1/4RHi, 1 - 250 mbar<br />Standards & Design:<br /><br />single-stage design, with safety gauges according to DIN EN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 1 - 250 mbar, adjustable<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 1 - 250 mbar, adjustable<br />• output pressure: 1 - 250 mbar, adjustable<br />• Inlet: internal thread G1/4RHi, output: internal thread G1/4RHi, output gauge: 0 - 250 mbar<br /><br />Dimensions:<br /><br />Width x Height x Depth: 108 x 162 x 108 mm |
|
|
|
|
|
| 3121 |
|
Vulkan LH 119-1 nitrogen line pressure reducer, G 1/2 if both sides, 0.2 - 1.8 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauge according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 21 bar<br />• outlet pressure<br />• output: 150 Nm³/h compressed air at 1<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 175 x 90 mm |
|
|
|
|
|
| 3124 |
|
In-line dome pressure reducer Vulkan LD1 MD hydrogen G1RHi, both sides 0.5 - 99 bar. Materials: Brass<br />Standards & Design:<br /><br />single-stage design, maximum inlet pressure: 100 bar<br /><br />Technical data:<br /><br />• maximum inlet pressure: 100 bar<br />• outlet pressure<br />• Output pressure: 0<br />• Inlet: internal thread G1RHi, outlet: internal thread G1RHi<br />• outlet: internal thread G1RHi<br /><br />Dimensions:<br /><br />Width x Height x Depth: 130 x 170 x 130 mm |
|
|
|
|
|
| 3126 |
|
Vulkan LH120 line pressure reducer for fuel gases G1RHi, both sides, 0 - 50 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 300 Nm³/h at 50 bar outlet pressure<br />• Inlet: internal thread G1RHi<br />• Outlet: internal thread G1RHi<br /><br />Dimensions:<br /><br />Width x Height x Depth: 132 x 295 x 132 mm |
|
|
|
|
|
| 3128 |
|
Vulkan LH 119-1 nitrogen line pressure reducer, G 1/2 if both sides, 0.2 - 1.8 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauge according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 21 bar<br />• outlet pressure<br />• output: 150 Nm³/h compressed air at 1<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 175 x 90 mm |
|
|
|
|
|
| 3129 |
|
Vulkan LR60 nitrogen ribbed pressure reducer G3/4RH, external on both sides<br />Standards & Design:<br /><br />Single-stage design, with safety pressure gauges according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 100 bar<br />• outlet pressure<br />• Output pressure: 15 - 60 bar adjustable<br />• Inlet: external thread G3/4RHak, Outlet: external thread G3/4RHak<br />• Outlet: external thread G3/4RHak<br />• Inlet pressure gauge: 0 - 160/100 bar<br />• Outlet pressure gauge: 0 - 100/60 bar<br /><br />Dimensions:<br /><br />Width x Height x Depth: 215 x 330 x 85 mm |
|
|
|
|
|
| 3130 |
|
Vulkan LR40 nitrogen ribbed line pressure reducer G3/4RHak, 15-40 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 100 bar, output pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar outlet pressure and 81 bar inlet pressure, input: external thread G3/4RHak, output: external thread G3/4RHak, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 215 x 330 x 85 mm<br /><br />Technical data:<br /><br />• maximum inlet pressure: 100 bar, output pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar outlet pressure and 81 bar inlet pressure, input: external thread G3/4RHak, output: external thread G3/4RHak, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 215 x 330 x 85 mm<br />• outlet pressure and 81 bar inlet pressure, input: external thread G3/4RHak, output: external thread G3/4RHak, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 215 x 330 x 85 mm<br />• output pressure: 15-40 bar, adjustable, maximum output: 280 Nm³/h compressed air at 40 bar outlet pressure and 81 bar inlet pressure, input: external thread G3/4RHak, output: external thread G3/4RHak, input pressure gauge: 0-160/100 bar, output pressure gauge: 0-60/40 bar, width x height x depth: 215 x 330 x 85 mm<br /><br />Dimensions:<br /><br />width x height x depth: 215 x 330 x 85 mm |
|
|
|
|
|
| 3131 |
|
Vulkan LH40 line pressure reducer nitrogen G1/2RHi both sides 0.5 - 16 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171, Inlet pressure: max<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 150 Nm³/h air at 16 bar outlet pressure<br />• Inlet: internal thread G1/2 RHi, Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br />• Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 180 x 90 mm |
|
|
|
|
|
| 3132 |
|
Vulkan LHR3 nitrogen line pressure reducer G 2RHi, 0.3 - 3.0 bar<br />Standards & Design:<br /><br />single-stage design, without pressure gauge<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 6 bar<br />• outlet pressure<br />• Output pressure: 0<br /><br />Dimensions:<br /><br />Width x Height x Depth: 240 x 300 x 240 mm |
|
|
|
|
|
| 3134 |
|
Vulkan LH 119-1 nitrogen line pressure reducer, G 1/2 if both sides, 0.2 - 1.8 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauge according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 21 bar<br />• outlet pressure<br />• output: 150 Nm³/h compressed air at 1<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 175 x 90 mm |
|
|
|
|
|
| 3143 |
|
Line pressure reducer Vulkan LP216-1.6 oxygen G3/8RHi 0.01-1.6 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 21 bar, output pressure: 0<br /><br />Technical data:<br /><br />• maximum inlet pressure: 21 bar, output pressure: 0<br />• output pressure: 0<br /><br />Dimensions:<br /><br />width x height x depth: 108 x 162 x 108 mm |
|
|
|
|
|
| 3155 |
|
Line pressure reducer Vulkan LH25/10 oxygen 0.5 - 10 bar with safety pressure gauge ISO 5171, Max. inlet pressure: 40 bar<br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 180 Nm?/h compressed air at 10 bar outlet pressure, Inlet: Internal thread G1RH, Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br />• Inlet: Internal thread G1RH, Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br />• Outlet: Internal thread G1RH, Output pressure gauge: 0-16/10 axial, Width x Height x Depth: 200 x 210 x 120 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 200 x 210 x 120 mm |
|
|
|
|
|
| 3932 |
|
<p>In-line dome pressure reducer Vulkan LD1 MD both sides G1RHi 0.5 - 99 bar single-stage design, without pressure gauge. Maximum inlet pressure: 25 bar. Output pressure: 0.1 - 24 bar adjustable. Maximum output: 700 Nm³/h at 12 bar outlet pressure. Inlet and outlet: G 1 RHi. Width x height x depth: 130 x 170 x 130 mm. Available for various gas types (please select in the selection window!): Oxygen: Item No. 108536. CO2 / Argon: Item No. 106536. Helium: Item No. 10653626. Nitrogen: Item No. 103536. Hydrogen: Item No. 104536. Compressed air: Item No. 107536</p> |
|
|
|
|
|
| 3939 |
|
Vulkan LH40 line pressure reducer for oxygen G1/2 RHi, 0.2-35 bar on both sides, with metal diaphragm for gas purity 5.0, with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.2-35 bar adjustable. Maximum output: 230 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - internal thread G1/2" RHi on both sides. Options (Surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 11853035 for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Internal thread G1/2" RHi 11853035-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 11853035-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 11853035-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 11853035-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 11853035-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 11853035-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 18mm stainless steel compression fitting |
|
|
|
|
|
| 4177 |
|
<p>Vulkan L10/2N line pressure reducer for compressed air G1/2RHak both sides 0 - 1.5 bar, two-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 20 bar. Output pressure: 0 - 1.5 bar, adjustable. Maximum output: 5 Nm³/h air at 1.5 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak, Inlet pressure gauge: 0 - 40/20 bar, Outlet pressure gauge: 0 - 2.5/1.5 bar, Width x Height x Depth: 220 x 190 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for Pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107564 for technical gases up to 4.5, with standard membrane on both sides. external thread G1/2" RHk according to EN 560 107564-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 107564-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 107564-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10 mm 107564-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 12 mm 107564-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 15 mm 107564-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Stainless steel compression fitting 18 mm 107564-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107564-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Stainless steel compression fitting 6 mm 107564-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 107564-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 107564-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 107564-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 107564-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 6673 |
|
Vulkan LH120 line pressure reducer for fuel gases G1RHi, both sides, 0 - 50 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 300 Nm³/h at 50 bar outlet pressure<br />• Inlet: internal thread G1RHi<br />• Outlet: internal thread G1RHi<br /><br />Dimensions:<br /><br />Width x Height x Depth: 132 x 295 x 132 mm |
|
|
|
|
|
| 6679 |
|
Vulkan LH120 line pressure reducer for fuel gases G1RHi, both sides, 0 - 50 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 300 Nm³/h at 50 bar outlet pressure<br />• Inlet: internal thread G1RHi<br />• Outlet: internal thread G1RHi<br /><br />Dimensions:<br /><br />Width x Height x Depth: 132 x 295 x 132 mm |
|
|
|
|
|
| 6681 |
|
Vulkan LH 119-1 nitrogen line pressure reducer, G 1/2 if both sides, 0.2 - 1.8 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauge according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 21 bar<br />• outlet pressure<br />• output: 150 Nm³/h compressed air at 1<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 175 x 90 mm |
|
|
|
|
|
| 6690 |
|
Vulkan LHR3 nitrogen line pressure reducer G 2RHi, 0.3 - 3.0 bar<br />Standards & Design:<br /><br />single-stage design, without pressure gauge<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 6 bar<br />• outlet pressure<br />• Output pressure: 0<br /><br />Dimensions:<br /><br />Width x Height x Depth: 240 x 300 x 240 mm |
|
|
|
|
|
| 6691 |
|
Vulkan LH120 line pressure reducer for fuel gases G1RHi, both sides, 0 - 50 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 300 Nm³/h at 50 bar outlet pressure<br />• Inlet: internal thread G1RHi<br />• Outlet: internal thread G1RHi<br /><br />Dimensions:<br /><br />Width x Height x Depth: 132 x 295 x 132 mm |
|
|
|
|
|
| 6695 |
|
Vulkan LH 119-1 nitrogen line pressure reducer, G 1/2 if both sides, 0.2 - 1.8 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauge according to DIN EN ISO 5171<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 21 bar<br />• outlet pressure<br />• output: 150 Nm³/h compressed air at 1<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 175 x 90 mm |
|
|
|
|
|
| 6696 |
|
Vulkan L15 line pressure reducer for fuel gases G1/2RH, 0 - 1.5 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 20 bar, output pressure: 0 to 1<br />according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br /><br />Technical data:<br /><br />• maximum inlet pressure: 20 bar, output pressure: 0 to 1<br />• outlet pressure, input: external thread G1/2RH according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br />• output pressure: 0 to 1<br /><br />Dimensions:<br /><br />width x height x depth: 200 x 200 x 75 mm |
|
|
|
|
|
| 6700 |
|
Vulkan LHR3 nitrogen line pressure reducer G 2RHi, 0.3 - 3.0 bar<br />Standards & Design:<br /><br />single-stage design, without pressure gauge<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 6 bar<br />• outlet pressure<br />• Output pressure: 0<br /><br />Dimensions:<br /><br />Width x Height x Depth: 240 x 300 x 240 mm |
|
|
|
|
|
| 6703 |
|
Vulkan L15 line pressure reducer for fuel gases G1/2RH, 0 - 1.5 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 20 bar, output pressure: 0 to 1<br />according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br /><br />Technical data:<br /><br />• maximum inlet pressure: 20 bar, output pressure: 0 to 1<br />• outlet pressure, input: external thread G1/2RH according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br />• output pressure: 0 to 1<br /><br />Dimensions:<br /><br />width x height x depth: 200 x 200 x 75 mm |
|
|
|
|
|
| 6704 |
|
<p>Vulkan L15 line pressure reducer for fuel gases G1/2RH, 0 - 1.5 bar<br>Standards & Design:<br><br>single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 20 bar, output pressure: 0 to 1<br>according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br><br>Technical data:<br><br>• maximum inlet pressure: 20 bar, output pressure: 0 to 1<br>• outlet pressure, input: external thread G1/2RH according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br>• output pressure: 0 to 1<br><br>Dimensions:<br><br>width x height x depth: 200 x 200 x 75 mm</p> |
|
|
|
|
|
| 6705 |
|
Vulkan L15 line pressure reducer for fuel gases G1/2RH, 0 - 1.5 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 20 bar, output pressure: 0 to 1<br />according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br /><br />Technical data:<br /><br />• maximum inlet pressure: 20 bar, output pressure: 0 to 1<br />• outlet pressure, input: external thread G1/2RH according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br />• output pressure: 0 to 1<br /><br />Dimensions:<br /><br />width x height x depth: 200 x 200 x 75 mm |
|
|
|
|
|
| 6709 |
|
Vulkan L15 line pressure reducer for fuel gases G1/2RH, 0 - 1.5 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 20 bar, output pressure: 0 to 1<br />according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br /><br />Technical data:<br /><br />• maximum inlet pressure: 20 bar, output pressure: 0 to 1<br />• outlet pressure, input: external thread G1/2RH according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br />• output pressure: 0 to 1<br /><br />Dimensions:<br /><br />width x height x depth: 200 x 200 x 75 mm |
|
|
|
|
|