SELECT 
  cscart_ult_product_descriptions.product_id, 
  cscart_ult_product_descriptions.short_description, 
  IF(
    cscart_ult_product_descriptions.short_description = "", 
    cscart_ult_product_descriptions.full_description, 
    ""
  ) AS full_description, 
  cscart_ult_product_descriptions.meta_keywords, 
  cscart_ult_product_descriptions.meta_description, 
  cscart_ult_product_descriptions.search_words, 
  cscart_ult_product_descriptions.promo_text 
FROM 
  cscart_ult_product_descriptions 
WHERE 
  cscart_ult_product_descriptions.product_id IN (
    5592, 5593, 5594, 5595, 5596, 5597, 5598, 
    5599, 5600, 5601, 5602, 5603, 5604, 
    5605, 5606, 5607, 5608, 5609, 5610, 
    5611, 5612, 1423, 1424, 1425, 1426, 
    1427, 5136, 5137, 5138, 5139, 5140, 
    5141, 6711, 1455, 5164, 1445, 5154, 
    1456, 5165, 1446, 5155, 1458, 5167, 
    1448, 5157, 1459, 5168, 5158, 1820, 
    1821, 1822, 1823, 1824, 1825, 1826, 
    1827, 1828, 1829, 1830, 1831, 1832, 
    1833, 1834, 1835, 1836, 1837, 1838, 
    1839, 1840, 1841, 1842, 1843, 1844, 
    1845, 1846, 1847, 1848, 1849, 1850, 
    1851, 1852, 1853, 1854, 1855, 1856, 
    1857, 1858, 1859, 1860, 1861, 1862, 
    1863, 1864, 1865, 1866, 1867
  ) 
  AND cscart_ult_product_descriptions.company_id = 1 
  AND cscart_ult_product_descriptions.lang_code = 'en'

Query time 0.00192

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "75.71"
    },
    "table": {
      "table_name": "cscart_ult_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id",
        "company_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code",
        "company_id"
      ],
      "key_length": "13",
      "rows_examined_per_scan": 96,
      "rows_produced_per_join": 96,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_ult_product_descriptions`.`company_id` = 1) and (`gaseus`.`cscart_ult_product_descriptions`.`product_id` in (5592,5593,5594,5595,5596,5597,5598,5599,5600,5601,5602,5603,5604,5605,5606,5607,5608,5609,5610,5611,5612,1423,1424,1425,1426,1427,5136,5137,5138,5139,5140,5141,6711,1455,5164,1445,5154,1456,5165,1446,5155,1458,5167,1448,5157,1459,5168,5158,1820,1821,1822,1823,1824,1825,1826,1827,1828,1829,1830,1831,1832,1833,1834,1835,1836,1837,1838,1839,1840,1841,1842,1843,1844,1845,1846,1847,1848,1849,1850,1851,1852,1853,1854,1855,1856,1857,1858,1859,1860,1861,1862,1863,1864,1865,1866,1867)) and (`gaseus`.`cscart_ult_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "66.11",
        "eval_cost": "9.60",
        "prefix_cost": "75.71",
        "data_read_per_join": "366K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "company_id",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text
1423 Main fin pressure reducer Vulkan HR20/300 EFFECT oxygen, for EB/BS 80/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, maximum inlet pressure: 300 bar, outlet pressure: 0 - 20 bar adjustable, maximum output: 170 Nm³/h air at 20 bar outlet pressure. Inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 240 x 240 x 85 mm. *****NOTE***** Replacement pressure reducer for stationary single-bundle systems EB80 and BS80 base stations. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
1424 Main fin pressure reducer Vulkan HR20/300 EFFECT oxygen, for EB/BS 80/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, maximum inlet pressure: 300 bar, outlet pressure: 0 - 20 bar adjustable, maximum output: 170 Nm³/h air at 20 bar outlet pressure. Inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 240 x 240 x 85 mm. *****NOTE***** Replacement pressure reducer for stationary single-bundle systems EB80 and BS80 base stations. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
1425 Main fin pressure reducer Vulkan HR20/300 EFFECT oxygen, for EB/BS 80/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, maximum inlet pressure: 300 bar, outlet pressure: 0 - 20 bar adjustable, maximum output: 170 Nm³/h air at 20 bar outlet pressure. Inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 240 x 240 x 85 mm. *****NOTE***** Replacement pressure reducer for stationary single-bundle systems EB80 and BS80 base stations. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
1426 Main fin pressure reducer Vulkan HR20/300 EFFECT oxygen, for EB/BS 80/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, maximum inlet pressure: 300 bar, outlet pressure: 0 - 20 bar adjustable, maximum output: 170 Nm³/h air at 20 bar outlet pressure. Inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 240 x 240 x 85 mm. *****NOTE***** Replacement pressure reducer for stationary single-bundle systems EB80 and BS80 base stations. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
1427 Main fin pressure reducer Vulkan HR20/300 EFFECT oxygen, for EB/BS 80/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, maximum inlet pressure: 300 bar, outlet pressure: 0 - 20 bar adjustable, maximum output: 170 Nm³/h air at 20 bar outlet pressure. Inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 240 x 240 x 85 mm. *****NOTE***** Replacement pressure reducer for stationary single-bundle systems EB80 and BS80 base stations. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
1445 Main ribbed pressure reducer Vulkan HR40/200 Effect compressed air, AM55/200, right side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
1446 Main ribbed pressure reducer Vulkan HR40/200 Effect fuel gas, AM55/200, right side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
1448 Main ribbed pressure reducer Vulkan HR40/200 Effect Helium, AM55/200, right side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
1455 Main ribbed pressure reducer Vulkan HR40/200 Effect compressed air, AM55/200, left side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
1456 Main ribbed pressure reducer Vulkan HR40/200 Effect fuel gas, AM55/200, left side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
1458 Main ribbed pressure reducer Vulkan HR40/200 Effect Helium, AM55/200, left side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
1459 Main ribbed pressure reducer Vulkan HR40/200 Effect Inert Gas, AM55/200, left side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
1820 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1821 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1822 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1823 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1824 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1825 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1826 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1827 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1828 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1829 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1830 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1831 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1832 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1833 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1834 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1835 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1836 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1837 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1838 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1839 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1840 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1841 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1842 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1843 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1844 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1845 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1846 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1847 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1848 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1849 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1850 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1851 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1852 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1853 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1854 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1855 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1856 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1857 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1858 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1859 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1860 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1861 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1862 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1863 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1864 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1865 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1866 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1867 Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5136 Main fin pressure reducer Vulkan HR20/300 EFFECT oxygen, for EB/BS 80/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, maximum inlet pressure: 300 bar, outlet pressure: 0 - 20 bar adjustable, maximum output: 170 Nm³/h air at 20 bar outlet pressure. Inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 240 x 240 x 85 mm. *****NOTE***** Replacement pressure reducer for stationary single-bundle systems EB80 and BS80 base stations. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5137 Main fin pressure reducer Vulkan HR20/300 EFFECT oxygen, for EB/BS 80/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, maximum inlet pressure: 300 bar, outlet pressure: 0 - 20 bar adjustable, maximum output: 170 Nm³/h air at 20 bar outlet pressure. Inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 240 x 240 x 85 mm. *****NOTE***** Replacement pressure reducer for stationary single-bundle systems EB80 and BS80 base stations. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5138 Main fin pressure reducer Vulkan HR20/300 EFFECT oxygen, for EB/BS 80/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, maximum inlet pressure: 300 bar, outlet pressure: 0 - 20 bar adjustable, maximum output: 170 Nm³/h air at 20 bar outlet pressure. Inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 240 x 240 x 85 mm. *****NOTE***** Replacement pressure reducer for stationary single-bundle systems EB80 and BS80 base stations. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5139 Main fin pressure reducer Vulkan HR20/300 EFFECT oxygen, for EB/BS 80/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, maximum inlet pressure: 300 bar, outlet pressure: 0 - 20 bar adjustable, maximum output: 170 Nm³/h air at 20 bar outlet pressure. Inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 240 x 240 x 85 mm. *****NOTE***** Replacement pressure reducer for stationary single-bundle systems EB80 and BS80 base stations. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5140 Main fin pressure reducer Vulkan HR20/300 EFFECT oxygen, for EB/BS 80/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, maximum inlet pressure: 300 bar, outlet pressure: 0 - 20 bar adjustable, maximum output: 170 Nm³/h air at 20 bar outlet pressure. Inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 240 x 240 x 85 mm. *****NOTE***** Replacement pressure reducer for stationary single-bundle systems EB80 and BS80 base stations. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5141 Main fin pressure reducer Vulkan HR20/300 EFFECT oxygen, for EB/BS 80/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, maximum inlet pressure: 300 bar, outlet pressure: 0 - 20 bar adjustable, maximum output: 170 Nm³/h air at 20 bar outlet pressure. Inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 240 x 240 x 85 mm. *****NOTE***** Replacement pressure reducer for stationary single-bundle systems EB80 and BS80 base stations. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5154 Main ribbed pressure reducer Vulkan HR40/200 Effect compressed air, AM55/200, right side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5155 Main ribbed pressure reducer Vulkan HR40/200 Effect fuel gas, AM55/200, right side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5157 Main ribbed pressure reducer Vulkan HR40/200 Effect Helium, AM55/200, right side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5158 Main ribbed pressure reducer Vulkan HR40/200 Effect Inert Gas, AM55/200, right side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5164 Main ribbed pressure reducer Vulkan HR40/200 Effect compressed air, AM55/200, left side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5165 Main ribbed pressure reducer Vulkan HR40/200 Effect fuel gas, AM55/200, left side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5167 Main ribbed pressure reducer Vulkan HR40/200 Effect Helium, AM55/200, left side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5168 Main ribbed pressure reducer Vulkan HR40/200 Effect Inert Gas, AM55/200, left side according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 28 bar fixed. Maximum output: 250 Nm³/h air at 28 bar outlet pressure. Inlet: M24x1.5 RHak - 16 S Vareo. Outlet: G 1/2 RHk U-nut according to DIN EN 560. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. *****NOTE***** Replacement pressure reducer for automatic changeover groups AM55, 55K and 55KM. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard diaphragm. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel diaphragm made of SS321 (1.4541).
5592 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5593 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5594 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5595 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5596 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5597 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5598 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5599 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5600 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5601 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5602 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5603 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5604 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5605 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5606 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5607 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5608 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5609 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5610 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5611 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5612 Main ribbed pressure reducer Vulkan HR20/300 EFFECT oxygen DIN 477-5, 0 - 20 bar according to ISO 7291, burn-out tested according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 170 Nm³/h compressed air at 20 bar back pressure. Inlet: W 30 x 2 RH U-nut according to DIN 477-5, No. 59. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 - 400/300 bar. Outlet gauge: 0 - 40/20 bar. Width x Height x Depth: 240 x 240 x 85 mm. Important note for 300 bar pressure reducers. - Please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 308527 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 308527-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 308527-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 308527-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 308527-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 308527-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 308527-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 308527-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 308527-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 308527-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 308527-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 308527-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 308527-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 308527-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 308527-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 308527-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 308527-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 308527-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6711 Vulkan L15 line pressure reducer for fuel gases G1/2RH, 0 - 1.5 bar<br />Standards & Design:<br /><br />single-stage design, with safety pressure gauges according to DIN ISO 5171, maximum inlet pressure: 20 bar, output pressure: 0 to 1<br />according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br /><br />Technical data:<br /><br />• maximum inlet pressure: 20 bar, output pressure: 0 to 1<br />• outlet pressure, input: external thread G1/2RH according to EN 560, output: external thread G1/2RH according to EN 560, input pressure gauge: 0 to 40/20 bar, output pressure gauge: 0 to 2<br />• output pressure: 0 to 1<br /><br />Dimensions:<br /><br />width x height x depth: 200 x 200 x 75 mm