Result
| product_id |
short_description |
full_description |
meta_keywords |
meta_description |
search_words |
promo_text |
unit_name |
| 196 |
|
<p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 197 |
|
<p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 198 |
|
<p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 199 |
|
<p>Vulkan L40 line pressure reducer for compressed air G1/2RH both sides, 0 - 40 bar, based on DIN EN ISO 7291, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 100 bar. Output pressure: 0 - 40 bar, adjustable. Maximum output: 90 Nm³/h at 40 bar outlet pressure. Inlet connection: G1/2RHak according to DIN EN 560. Outlet connection: G1/2RHak according to DIN EN 560. Inlet pressure gauge: 0 - 160 / 100 bar. Outlet pressure gauge: 0 - 60 / 40 bar. Width x Height x Depth: 165 x 210 x 75 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with Standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 107523 for technical gases up to 4.5, with standard membrane, external thread G1/2" RHk on both sides according to EN 560 107523-6M-6M for technical gases up to 4.5, with standard membrane, compression fitting VA 6mm on both sides 107523-8M-8M for technical gases up to 4.5, with standard membrane, compression fitting VA 8mm on both sides 107523-10M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 107523-12M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 107523-15M-15M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 15mm 107523-18M-18M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 18mm 107523-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. External thread G1/2" RHk according to EN 560 107523-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 6mm 107523-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 8mm 107523-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 107523-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 107523-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 107523-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 3920 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 3921 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 3968 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 3969 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 3970 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 3971 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 3972 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 3973 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 3974 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4020 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4021 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4022 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4023 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4024 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4025 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4026 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4094 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4095 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4096 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4097 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4098 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4099 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4100 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4101 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4102 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4103 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4104 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4105 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4106 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4107 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4163 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4164 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4165 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4166 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4167 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4168 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4169 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4216 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4217 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4218 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4219 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4220 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4221 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|
| 4222 |
|
<p>Vulkan L20 nitrogen line pressure reducer G1/2RH external on both sides. Single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 40 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 70 Nm³/h compressed air at 20 bar outlet pressure. Inlet: external thread G1/2RHak, Outlet: external thread G1/2RHak. Inlet pressure gauge: 0 - 60/40 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 200 x 75 mm. This line pressure reducer is available in the following versions: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with Stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - Male thread G1/2" RHk on both sides according to EN 56 Options (surcharge): Order number Gas type/Membrane Inlet/outlet screw connection 103520 for technical gases up to 4.5, with standard diaphragm on both sides. Male thread G1/2" RHk according to EN 560 103520-6M-6M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 6mm 103520-8M-8M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 8mm 103520-10M-15M for technical gases up to 4.5, with standard diaphragm on both sides. Compression fitting VA 10mm 103520-12M-15M for technical gases up to 4.5, with standard membrane on both sides. 12mm stainless steel compression fitting. 103520-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 103520-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 103520-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. G1/2" male thread RHk according to EN 560. 103520-MM-6M-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 103520-MM-8M-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 8mm stainless steel compression fitting 103520-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 10mm stainless steel compression fitting 103520-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 12mm stainless steel compression fitting 103520-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. 15mm stainless steel compression fitting 103520-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18 mm</p> |
|
|
|
|
|