SELECT 
  cscart_ult_product_descriptions.product_id, 
  cscart_ult_product_descriptions.short_description, 
  IF(
    cscart_ult_product_descriptions.short_description = "", 
    cscart_ult_product_descriptions.full_description, 
    ""
  ) AS full_description, 
  cscart_ult_product_descriptions.meta_keywords, 
  cscart_ult_product_descriptions.meta_description, 
  cscart_ult_product_descriptions.search_words, 
  cscart_ult_product_descriptions.promo_text 
FROM 
  cscart_ult_product_descriptions 
WHERE 
  cscart_ult_product_descriptions.product_id IN (
    49, 90, 91, 92, 93, 94, 95, 96, 154, 155, 
    156, 157, 158, 159, 160, 175, 176, 177, 
    178, 179, 180, 181, 257, 258
  ) 
  AND cscart_ult_product_descriptions.company_id = 1 
  AND cscart_ult_product_descriptions.lang_code = 'en'

Query time 0.00064

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "18.94"
    },
    "table": {
      "table_name": "cscart_ult_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id",
        "company_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code",
        "company_id"
      ],
      "key_length": "13",
      "rows_examined_per_scan": 24,
      "rows_produced_per_join": 24,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_ult_product_descriptions`.`company_id` = 1) and (`gaseus`.`cscart_ult_product_descriptions`.`product_id` in (49,90,91,92,93,94,95,96,154,155,156,157,158,159,160,175,176,177,178,179,180,181,257,258)) and (`gaseus`.`cscart_ult_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "16.54",
        "eval_cost": "2.40",
        "prefix_cost": "18.94",
        "data_read_per_join": "91K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "company_id",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text
49 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
90 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
91 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
92 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
93 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
94 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
95 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
96 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
154 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
155 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
156 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
157 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
158 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
159 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
160 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
175 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
176 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
177 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
178 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
179 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
180 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
181 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
257 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
258 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm