SELECT 
  cscart_ult_product_descriptions.product_id, 
  cscart_ult_product_descriptions.short_description, 
  IF(
    cscart_ult_product_descriptions.short_description = "", 
    cscart_ult_product_descriptions.full_description, 
    ""
  ) AS full_description, 
  cscart_ult_product_descriptions.meta_keywords, 
  cscart_ult_product_descriptions.meta_description, 
  cscart_ult_product_descriptions.search_words, 
  cscart_ult_product_descriptions.promo_text 
FROM 
  cscart_ult_product_descriptions 
WHERE 
  cscart_ult_product_descriptions.product_id IN (
    1615, 1616, 1617, 1618, 1619, 1620, 1621, 
    1622, 1623, 1624, 1625, 5299, 5300, 
    5301, 5302, 5303, 5304, 5305, 5306, 
    5307, 5308, 5309, 5310, 5311, 5312, 
    5313, 5314, 5315, 5316, 5317, 5318, 
    5319, 5320, 5321, 5322, 5323, 5324, 
    5325, 1627, 1628, 1629, 1630, 1631, 
    1632, 1633, 1634, 1635, 1636
  ) 
  AND cscart_ult_product_descriptions.company_id = 1 
  AND cscart_ult_product_descriptions.lang_code = 'en'

Query time 0.00086

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "37.86"
    },
    "table": {
      "table_name": "cscart_ult_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id",
        "company_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code",
        "company_id"
      ],
      "key_length": "13",
      "rows_examined_per_scan": 48,
      "rows_produced_per_join": 48,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_ult_product_descriptions`.`company_id` = 1) and (`gaseus`.`cscart_ult_product_descriptions`.`product_id` in (1615,1616,1617,1618,1619,1620,1621,1622,1623,1624,1625,5299,5300,5301,5302,5303,5304,5305,5306,5307,5308,5309,5310,5311,5312,5313,5314,5315,5316,5317,5318,5319,5320,5321,5322,5323,5324,5325,1627,1628,1629,1630,1631,1632,1633,1634,1635,1636)) and (`gaseus`.`cscart_ult_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "33.06",
        "eval_cost": "4.80",
        "prefix_cost": "37.86",
        "data_read_per_join": "183K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "company_id",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text
1615 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1616 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1617 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1618 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1619 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1620 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1621 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1622 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1623 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1624 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1625 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
1627 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
1628 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
1629 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
1630 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
1631 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
1632 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
1633 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
1634 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
1635 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
1636 Main and line pressure reducer Vulkan LHR 200/200 DIN oxygen DIN 477-1, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, max. inlet pressure: 200 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 200 bar pre-pressure, inlet: G 3/4 RHf U-nut according to DIN 477-1, outlet: G 3/4 RHaf according to DIN 477-1, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. This main and line pressure reducer is available in the following, among others: Versions: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 208775 G1/2RHak according to EN 560 208775-800 External thread G1/4" RHk according to EN560 208775-870 External thread G3/8" RHk according to EN 560 208775-6M Compression fitting VA 6mm 208775-8M Compression fitting VA 8mm 208775-10M Compression fitting VA 10mm 208775-12M Compression fitting VA 12mm 208775-15M Compression fitting VA 15mm 208775-18M Compression fitting VA 18mm
5299 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5300 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5301 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5302 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5303 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5304 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5305 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5306 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5307 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5308 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5309 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5310 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5311 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5312 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5313 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5314 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5315 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5316 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5317 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5318 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5319 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5320 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5321 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5322 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5323 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5324 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm
5325 Vulkan LHR 300/200 DIN oxygen cylinder pressure reducer according to DIN 477-5, 10 - 200 bar according to ISO 2503, single-stage design, with safety pressure gauges according to DIN EN ISO 5171, maximum inlet pressure: 300 bar, adjustable outlet pressure: 10 - 200 bar, output: 380 Nm³/h (compressed air) at 50 bar outlet pressure and 300 bar pre-pressure, inlet: W 30 x 2 RH U-nut according to DIN 477 Part 5, outlet: G 3/4 RHaf according to DIN 477 Part 1, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 315/200 bar, width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 308775 G1/2RHak according to EN 560 308775-800 External thread G1/4" RHk according to EN560 308775-870 External thread G3/8" RHk according to EN 560 308775-6M Compression fitting VA 6mm 308775-8M Compression fitting VA 8mm 308775-10M Compression fitting VA 10mm 308775-12M Compression fitting VA 12mm 308775-15M Compression fitting VA 15mm 308775-18M compression fitting VA 18mm