SELECT 
  cscart_product_descriptions.product_id, 
  cscart_product_descriptions.short_description, 
  IF(
    cscart_product_descriptions.short_description = '' 
    OR cscart_product_descriptions.short_description IS NULL, 
    cscart_product_descriptions.full_description, 
    ''
  ) AS full_description, 
  cscart_product_descriptions.meta_keywords, 
  cscart_product_descriptions.meta_description, 
  cscart_product_descriptions.search_words, 
  cscart_product_descriptions.promo_text, 
  cscart_product_descriptions.unit_name 
FROM 
  cscart_product_descriptions 
WHERE 
  cscart_product_descriptions.product_id IN (
    1397, 1398, 1399, 1400, 1401, 1402, 1403, 
    1404, 1405, 1406, 1407, 1408, 1409, 
    1410, 1411, 1412, 1413, 1414, 1415, 
    1416, 5107, 5108, 5109, 5110
  ) 
  AND cscart_product_descriptions.lang_code = 'en'

Query time 0.00069

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "28.91"
    },
    "table": {
      "table_name": "cscart_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code"
      ],
      "key_length": "9",
      "rows_examined_per_scan": 24,
      "rows_produced_per_join": 24,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_product_descriptions`.`product_id` in (1397,1398,1399,1400,1401,1402,1403,1404,1405,1406,1407,1408,1409,1410,1411,1412,1413,1414,1415,1416,5107,5108,5109,5110)) and (`gaseus`.`cscart_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "26.51",
        "eval_cost": "2.40",
        "prefix_cost": "28.91",
        "data_read_per_join": "109K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text",
        "unit_name"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text unit_name
1397 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1398 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1399 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1400 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1401 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1402 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1403 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1404 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1405 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1406 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1407 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1408 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1409 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1410 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1411 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1412 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1413 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1414 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1415 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
1416 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5107 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5108 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5109 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>
5110 <p>In-line ribbed pressure reducer Vulkan LR20 Effect oxygen, 0 - 20 bar based on ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to ISO 5171, max. inlet pressure: 40 bar, outlet pressure: 0 - 20 bar adjustable, max. output: 160 Nm³/h air at 20 bar back pressure. Inlet: external thread G3/4RHak - EN560, outlet: external thread G3/4RHak - EN560, inlet pressure gauge: 0 - 60/40 bar, outlet pressure gauge: 0 - 40/20 bar, width x height x depth: 220 x 240 x 85 mm. This in-line ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - external thread G3/4" RHak on both sides according to EN 560 Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 108627 for technical gases up to 4.5, with standard membrane on both sides. external thread G3/4" RHak according to EN 560 108627-12M-12M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 12mm 108627-15M-15M for technical gases up to 4.5, with standard membrane on both sides. compression fitting VA 15mm 108627-18M-18M for technical gases up to 4.5, with standard diaphragm on both sides. 18 mm stainless steel compression fitting. 108627-MM for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. G3/4" male thread RHak according to EN 560. 108627-MM-12M-12M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 12 mm stainless steel compression fitting. 108627-MM-15M-15M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. 15 mm stainless steel compression fitting. 108627-MM-18M-18M for pure gases up to 5.0, with metal diaphragm made of SS321 (1.4541) on both sides. SS321 (1.4541) both sides compression fitting VA 18 mm</p>