SELECT 
  cscart_product_descriptions.product_id, 
  cscart_product_descriptions.short_description, 
  IF(
    cscart_product_descriptions.short_description = '' 
    OR cscart_product_descriptions.short_description IS NULL, 
    cscart_product_descriptions.full_description, 
    ''
  ) AS full_description, 
  cscart_product_descriptions.meta_keywords, 
  cscart_product_descriptions.meta_description, 
  cscart_product_descriptions.search_words, 
  cscart_product_descriptions.promo_text, 
  cscart_product_descriptions.unit_name 
FROM 
  cscart_product_descriptions 
WHERE 
  cscart_product_descriptions.product_id IN (
    259, 260, 261, 262, 263, 311, 312, 313, 
    314, 315, 316, 3539, 3540, 3541, 3542, 
    3543, 3544, 3545, 3954, 3955, 3956, 
    3957, 3958, 3959
  ) 
  AND cscart_product_descriptions.lang_code = 'en'

Query time 0.00054

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "28.91"
    },
    "table": {
      "table_name": "cscart_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code"
      ],
      "key_length": "9",
      "rows_examined_per_scan": 24,
      "rows_produced_per_join": 24,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_product_descriptions`.`product_id` in (259,260,261,262,263,311,312,313,314,315,316,3539,3540,3541,3542,3543,3544,3545,3954,3955,3956,3957,3958,3959)) and (`gaseus`.`cscart_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "26.51",
        "eval_cost": "2.40",
        "prefix_cost": "28.91",
        "data_read_per_join": "109K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text",
        "unit_name"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text unit_name
259 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
260 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
261 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
262 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
263 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
311 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
312 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
313 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
314 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
315 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
316 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3539 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3540 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3541 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3542 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3543 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3544 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3545 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3954 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3955 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3956 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3957 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3958 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3959 Vulkan LH40 nitrogen line pressure reducer G1/2RHi both sides 0.2-4 bar with safety pressure gauge according to DIN EN ISO 5171, Inlet pressure: max. 40 bar Outlet pressure: 0.2-4 bar adjustable Maximum output: 30 Nm³/h air at 2 bar back pressure Inlet: internal thread G1/2 RHi Outlet: internal thread G1/2 RHi Working pressure gauge: 0 - 6/4 bar axial Width x Height x Depth: 90 x 180 x 90 mm This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (extra charge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - both sides. Internal thread G1/2" RHi Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353004 for technical gases up to 4.5, with standard membrane on both sides. Internal thread G1/2" RHi 10353004-6M-6M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 6mm 10353004-8M-8M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 8mm 10353004-10M-10M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 10mm 10353004-12M-12M for technical gases up to 4.5, with standard membrane on both sides. Compression fitting VA 12mm 10353004-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353004-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353004-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353004-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353004-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353004-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353004-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353004-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353004-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm