SELECT 
  cscart_ult_product_descriptions.product_id, 
  cscart_ult_product_descriptions.short_description, 
  IF(
    cscart_ult_product_descriptions.short_description = "", 
    cscart_ult_product_descriptions.full_description, 
    ""
  ) AS full_description, 
  cscart_ult_product_descriptions.meta_keywords, 
  cscart_ult_product_descriptions.meta_description, 
  cscart_ult_product_descriptions.search_words, 
  cscart_ult_product_descriptions.promo_text 
FROM 
  cscart_ult_product_descriptions 
WHERE 
  cscart_ult_product_descriptions.product_id IN (
    3113, 6687, 6699, 36, 37, 38, 39, 40, 41, 
    42, 83, 84, 85, 86, 87, 88, 89, 147, 148, 
    149, 150, 151, 152, 153
  ) 
  AND cscart_ult_product_descriptions.company_id = 1 
  AND cscart_ult_product_descriptions.lang_code = 'en'

Query time 0.00065

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "18.94"
    },
    "table": {
      "table_name": "cscart_ult_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id",
        "company_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code",
        "company_id"
      ],
      "key_length": "13",
      "rows_examined_per_scan": 24,
      "rows_produced_per_join": 24,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_ult_product_descriptions`.`company_id` = 1) and (`gaseus`.`cscart_ult_product_descriptions`.`product_id` in (3113,6687,6699,36,37,38,39,40,41,42,83,84,85,86,87,88,89,147,148,149,150,151,152,153)) and (`gaseus`.`cscart_ult_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "16.54",
        "eval_cost": "2.40",
        "prefix_cost": "18.94",
        "data_read_per_join": "91K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "company_id",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text
36 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
37 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
38 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
39 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
40 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
41 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
42 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
83 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
84 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
85 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
86 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
87 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
88 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
89 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
147 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
148 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
149 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
150 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
151 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
152 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
153 Vulkan LH40 line pressure reducer for nitrogen G1/2 RHi both sides 0.2-10 bar with safety pressure gauge according to DIN EN ISO 5171. Inlet pressure: max. 40 bar. Outlet pressure: 0.5-10 bar adjustable. Maximum output: 105 Nm³/h air at 2 bar outlet pressure. Inlet: internal thread G1/2 RHi. Outlet: internal thread G1/2 RHi. Working pressure gauge: 0-6/4 bar axial. Width x Height x Depth: 90 x 180 x 90 mm. This line pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541). Special outlet fittings: Standard: - Internal thread G1/2" RHi on both sides Options (surcharge): Order number Gas purity/Membrane Inlet/outlet screw connection 10353010 for technical gases up to 4.5, with standard membrane. Internal thread G1/2" RHi on both sides 10353010-6M-6M for technical gases up to 4.5, with standard membrane. Compression fitting VA 6mm on both sides 10353010-8M-8M for technical gases up to 4.5, with standard membrane. Compression fitting VA 8mm on both sides 10353010-10M-10M for technical gases up to 4.5, with standard membrane. Compression fitting VA 10mm on both sides 10353010-12M-12M for technical gases up to 4.5, with standard membrane. Compression fitting VA 12mm on both sides 10353010-15M-15M for technical gases up to 4.5, with standard membrane on both sides. 15mm stainless steel compression fitting. 10353010-18M-18M for technical gases up to 4.5, with standard membrane on both sides. 18mm stainless steel compression fitting. 10353010-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. G1/2" RHi internal thread. 10353010-MM-6M-6M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. 6mm stainless steel compression fitting. 10353010-MM-8M-8M for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) on both sides. VA 8mm 10353010-MM-10M-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 10mm 10353010-MM-12M-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 12mm 10353010-MM-15M-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 15mm 10353010-MM-18M-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) on both sides. Compression fitting VA 18mm
3113 Vulkan LH40 line pressure reducer nitrogen G1/2RHi both sides 0.5 - 16 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171, Inlet pressure: max<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 150 Nm³/h air at 16 bar outlet pressure<br />• Inlet: internal thread G1/2 RHi, Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br />• Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 180 x 90 mm
6687 Vulkan LH40 line pressure reducer nitrogen G1/2RHi both sides 0.5 - 16 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171, Inlet pressure: max<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 150 Nm³/h air at 16 bar outlet pressure<br />• Inlet: internal thread G1/2 RHi, Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br />• Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 180 x 90 mm
6699 Vulkan LH40 line pressure reducer nitrogen G1/2RHi both sides 0.5 - 16 bar with safety pressure gauge<br />Standards & Design:<br /><br />according to DIN EN ISO 5171, Inlet pressure: max<br /><br />Technical data:<br /><br />• Outlet pressure: 0<br />• output: 150 Nm³/h air at 16 bar outlet pressure<br />• Inlet: internal thread G1/2 RHi, Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br />• Outlet: internal thread G1/2 RHi, Working pressure gauge: 0 - 16/10 bar axial, Width x Height x Depth: 90 x 180 x 90 mm<br /><br />Dimensions:<br /><br />Width x Height x Depth: 90 x 180 x 90 mm