Result
| product_id |
short_description |
full_description |
meta_keywords |
meta_description |
search_words |
promo_text |
| 1820 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1821 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1822 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1823 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1824 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1825 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1826 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1827 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1828 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1829 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1830 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1831 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1832 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1833 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1834 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1835 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1836 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1837 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1838 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1839 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1840 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1841 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1842 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1843 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1844 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1845 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1846 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1847 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1848 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1849 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1850 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1851 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1852 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1853 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1854 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1855 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1856 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1857 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1858 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1859 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1860 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1861 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1862 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1863 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1864 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1865 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1866 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1867 |
|
Main finned pressure reducer Vulkan HR40/200 EFFECT inert gas, DIN 477-1, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all working conditions, with safety pressure gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 - 40 bar, adjustable, max. output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 - 315/200 bar, outlet pressure gauge: 0 - 60/40 bar, width x height x depth: 240 x 280 x 85 mm. Main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 206546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 206546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 206546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 206546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 206546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 206546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 206546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 206546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 206546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 206546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 206546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|