SELECT 
  cscart_product_descriptions.product_id, 
  cscart_product_descriptions.short_description, 
  IF(
    cscart_product_descriptions.short_description = '' 
    OR cscart_product_descriptions.short_description IS NULL, 
    cscart_product_descriptions.full_description, 
    ''
  ) AS full_description, 
  cscart_product_descriptions.meta_keywords, 
  cscart_product_descriptions.meta_description, 
  cscart_product_descriptions.search_words, 
  cscart_product_descriptions.promo_text, 
  cscart_product_descriptions.unit_name 
FROM 
  cscart_product_descriptions 
WHERE 
  cscart_product_descriptions.product_id IN (
    5449, 5450, 5451, 5452, 5453, 5454, 5455, 
    5456, 5457, 5458, 5459, 5460, 6727, 
    1672, 1673, 1674, 1675, 1676, 1677, 
    1678, 1679, 1680, 1681, 1682, 1683, 
    1684, 1685, 1686, 1687, 1688, 1689, 
    1690, 1691, 1692, 1693, 1694, 1695, 
    1696, 1697, 1698, 1699, 1700, 1701, 
    1702, 1703, 1704, 1705, 1706
  ) 
  AND cscart_product_descriptions.lang_code = 'en'

Query time 0.00090

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "57.81"
    },
    "table": {
      "table_name": "cscart_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code"
      ],
      "key_length": "9",
      "rows_examined_per_scan": 48,
      "rows_produced_per_join": 48,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_product_descriptions`.`product_id` in (5449,5450,5451,5452,5453,5454,5455,5456,5457,5458,5459,5460,6727,1672,1673,1674,1675,1676,1677,1678,1679,1680,1681,1682,1683,1684,1685,1686,1687,1688,1689,1690,1691,1692,1693,1694,1695,1696,1697,1698,1699,1700,1701,1702,1703,1704,1705,1706)) and (`gaseus`.`cscart_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "53.01",
        "eval_cost": "4.80",
        "prefix_cost": "57.81",
        "data_read_per_join": "219K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text",
        "unit_name"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text unit_name
1672 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1673 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1674 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1675 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1676 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1677 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1678 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1679 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1680 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1681 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1682 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1683 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1684 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1685 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1686 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1687 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1688 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1689 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1690 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1691 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1692 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1693 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1694 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1695 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1696 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1697 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1698 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1699 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1700 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1701 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1702 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1703 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1704 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1705 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1706 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5449 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5450 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5451 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5452 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5453 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5454 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5455 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5456 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5457 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5458 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5459 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5460 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6727 Tapping Points: Pressure Reducer Vulkan E10F Flowmeter LabLine Forming Gas 34 Nl/min. Completely chrome-plated with metal diaphragms for gas purity 5.0, based on ISO 2503<br />Standards & Design:<br /><br />Class 20<br />single-stage design, with flowmeter for monitoring the exact flow rate in Nl/min<br />according to DIN EN 560<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 20 bar<br />• Output pressure: 4<br />• Inlet: G 3/8 LHk U-nut according to DIN EN 560<br />• Outlet: 6mm double clamp ring, stainless steel<br /><br />Dimensions:<br /><br />Width x Height x Depth: 120 x 210 x 65 mm