Result
| product_id |
short_description |
full_description |
meta_keywords |
meta_description |
search_words |
promo_text |
| 1517 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1518 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1519 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1520 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1521 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1522 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1523 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1524 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1525 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1537 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1538 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1539 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1540 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1541 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1542 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1543 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1544 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 1545 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 2217 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 2218 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 2219 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 2735 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 2863 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 2864 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 3729 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 3732 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5220 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5221 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5222 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5223 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5224 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5225 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5226 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5227 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5237 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5238 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5239 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5240 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5241 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5242 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5243 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5244 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5817 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5818 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 5819 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 6322 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 6448 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 6449 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 7494 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 7495 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 7498 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 7499 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 7504 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 7505 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 7526 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
| 7527 |
|
Main pressure reducer Vulkan H20/200 Effect fuel gases 75 Nm³/h, 0 - 20 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 200 bar. Output pressure: 0 - 20 bar adjustable. Maximum output: 75 Nm³/h at 20 bar back pressure. Inlet: W21.8x1/14 LHf U-nut according to DIN 477-1. Outlet: G1/2RHak according to EN 560. Connection for relief valves G1/4RHak. Inlet pressure gauge: 0 - 315/200 bar. Outlet pressure gauge: 0 - 40/20 bar. Width x Height x Depth: 200 x 190 x 75 mm. This main pressure reducer is available in, among others: following versions: Gas purity/membrane: Standard:- for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge):- for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 204520 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 204520-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 204520-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 204520-6M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 6mm 204520-8M for technical gases up to 4.5, with standard diaphragm compression fitting VA 8mm 204520-10M for technical gases up to 4.5, with standard diaphragm compression fitting VA 10mm 204520-12M for technical gases up to 4.5, with standard diaphragm compression fitting VA 12mm 204520-15M for technical gases up to 4.5, with standard diaphragm compression fitting VA 15mm 204520-18M for technical gases up to 4.5, with standard diaphragm compression fitting VA 18mm 204520-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) G1/2RHak according to EN 560 204520-MM-800 for Pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 204520-MM-870 For pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 204520-MM-6M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 204520-MM-8M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 204520-MM-10M For pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 204520-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 204520-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 204520-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|