SELECT 
  cscart_ult_product_descriptions.product_id, 
  cscart_ult_product_descriptions.short_description, 
  IF(
    cscart_ult_product_descriptions.short_description = "", 
    cscart_ult_product_descriptions.full_description, 
    ""
  ) AS full_description, 
  cscart_ult_product_descriptions.meta_keywords, 
  cscart_ult_product_descriptions.meta_description, 
  cscart_ult_product_descriptions.search_words, 
  cscart_ult_product_descriptions.promo_text 
FROM 
  cscart_ult_product_descriptions 
WHERE 
  cscart_ult_product_descriptions.product_id IN (
    2512, 2513, 3837, 3838, 3839, 6109, 6110, 
    2277, 2278, 2279, 2280, 2327, 2328, 
    2329, 2330, 2394, 2395, 2396, 2397, 
    2398, 2399, 2400, 2401, 2402, 2505, 
    2506, 2507, 2508, 5876, 5877, 5878, 
    5879, 5880, 5926, 5927, 5928, 5929, 
    5930, 5994, 5995, 5996, 5997, 5998, 
    5999, 6000, 6001, 6002, 6105
  ) 
  AND cscart_ult_product_descriptions.company_id = 1 
  AND cscart_ult_product_descriptions.lang_code = 'en'

Query time 0.00095

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "37.86"
    },
    "table": {
      "table_name": "cscart_ult_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id",
        "company_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code",
        "company_id"
      ],
      "key_length": "13",
      "rows_examined_per_scan": 48,
      "rows_produced_per_join": 48,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_ult_product_descriptions`.`company_id` = 1) and (`gaseus`.`cscart_ult_product_descriptions`.`product_id` in (2512,2513,3837,3838,3839,6109,6110,2277,2278,2279,2280,2327,2328,2329,2330,2394,2395,2396,2397,2398,2399,2400,2401,2402,2505,2506,2507,2508,5876,5877,5878,5879,5880,5926,5927,5928,5929,5930,5994,5995,5996,5997,5998,5999,6000,6001,6002,6105)) and (`gaseus`.`cscart_ult_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "33.06",
        "eval_cost": "4.80",
        "prefix_cost": "37.86",
        "data_read_per_join": "183K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "company_id",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text
2277 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2278 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2279 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2280 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2327 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2328 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2329 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2330 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2394 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2395 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2396 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2397 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2398 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2399 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2400 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2401 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2402 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2505 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2506 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2507 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2508 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
2512 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
2513 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
3837 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
3838 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
3839 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
5876 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5877 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5878 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5879 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5880 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5926 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5927 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5928 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5929 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5930 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5994 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5995 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5996 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5997 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5998 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
5999 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
6000 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
6001 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
6002 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
6105 Vulkan LHR 300/200 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 200 bar, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 200 bar, adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 315 / 200 bar. Width x height x depth: 150 x 210 x 120 mm. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304770 G1/2RHak according to EN 560 304770-800 External thread G1/4" RHk according to EN560 304770-870 External thread G3/8" RHk according to EN 560 304770-6M Compression fitting VA 6mm 304770-8M Compression fitting VA 8mm 304770-10M Compression fitting VA 10mm 304770-12M Compression fitting VA 12mm 304770-15M Compression fitting VA 15mm 304770-18M compression fitting VA 18mm
6109 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm
6110 Vulkan LHR 300/100 BSP cylinder pressure reducer for fuel gases DIN 477-5, 10 - 100 bar according to DIN EN ISO 2503, Class 3, single-stage design, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 10 - 100 bar adjustable. Maximum output: 380 Nm?/h at 50 bar outlet pressure. Inlet connection: W30x2LH U-nut according to DIN 477. Outlet connection: G1/2RHak. Inlet pressure gauge: 0 - 400 / 300 bar. Outlet pressure gauge: 0 - 100 / 160 bar. Width x Height x Depth: 150 x 210 x 120 mm. Weight: approx. 1.2 kg. Important note for 300 bar pressure reducers - please check your cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main and line pressure reducer is available in the following versions, among others: Special outlet screw connection: Standard:- G1/2RHak according to EN 560 Options (surcharge): Item numberOutlet connection 304760 G1/2RHak according to EN 560 304760-800 External thread G1/4" RHk according to EN560 304760-870 External thread G3/8" RHk according to EN 560 304760-6M Compression fitting VA 6mm 304760-8M Compression fitting VA 8mm 304760-10M Compression fitting VA 10mm 304760-12M Compression fitting VA 12mm 304760-15M Compression fitting VA 15mm 304760-18M compression fitting VA 18mm