SELECT 
  cscart_product_descriptions.product_id, 
  cscart_product_descriptions.short_description, 
  IF(
    cscart_product_descriptions.short_description = '' 
    OR cscart_product_descriptions.short_description IS NULL, 
    cscart_product_descriptions.full_description, 
    ''
  ) AS full_description, 
  cscart_product_descriptions.meta_keywords, 
  cscart_product_descriptions.meta_description, 
  cscart_product_descriptions.search_words, 
  cscart_product_descriptions.promo_text, 
  cscart_product_descriptions.unit_name 
FROM 
  cscart_product_descriptions 
WHERE 
  cscart_product_descriptions.product_id IN (
    5390, 5391, 5392, 5393, 5394, 5395, 5396, 
    5397, 5398, 5399, 5400, 5401, 5402, 
    5403, 5404, 5405, 5406, 5407, 5408, 
    5409, 5410, 5411, 5412, 5413, 5414, 
    6728, 515, 3156, 3676, 5131, 3834, 3833, 
    2130, 2131, 2132, 2133, 2134, 2135, 
    2136, 2137, 2138, 2139, 2140, 2141, 
    2142, 2143, 2144, 2145, 2146, 2147, 
    2148, 2149, 2150, 2151, 2152, 2153, 
    2154, 2155, 2156, 2157, 2158, 2159, 
    2160, 2161, 2162, 2163, 2164, 2165, 
    2166, 2167, 2168, 2169, 2170, 2171, 
    2172, 2173, 2174, 2175, 2176, 2177, 
    2178, 2179, 2180, 2181, 2182, 2183, 
    2184, 3779, 3780, 3781, 3782, 3783, 
    3784, 3785, 3786, 3787
  ) 
  AND cscart_product_descriptions.lang_code = 'en'

Query time 0.00199

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "115.60"
    },
    "table": {
      "table_name": "cscart_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code"
      ],
      "key_length": "9",
      "rows_examined_per_scan": 96,
      "rows_produced_per_join": 96,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_product_descriptions`.`product_id` in (5390,5391,5392,5393,5394,5395,5396,5397,5398,5399,5400,5401,5402,5403,5404,5405,5406,5407,5408,5409,5410,5411,5412,5413,5414,6728,515,3156,3676,5131,3834,3833,2130,2131,2132,2133,2134,2135,2136,2137,2138,2139,2140,2141,2142,2143,2144,2145,2146,2147,2148,2149,2150,2151,2152,2153,2154,2155,2156,2157,2158,2159,2160,2161,2162,2163,2164,2165,2166,2167,2168,2169,2170,2171,2172,2173,2174,2175,2176,2177,2178,2179,2180,2181,2182,2183,2184,3779,3780,3781,3782,3783,3784,3785,3786,3787)) and (`gaseus`.`cscart_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "106.01",
        "eval_cost": "9.60",
        "prefix_cost": "115.61",
        "data_read_per_join": "438K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text",
        "unit_name"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text unit_name
515 Main ribbed pressure reducer Vulkan HR60/300 EFFECT oxygen, for EB/BS 120/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, max. inlet pressure: 300 bar, outlet pressure: 15 - 60 bar adjustable, max. output: 450 Nm³/h air at 60 bar outlet pressure, inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 100/60 bar, width x height x depth: 240 x 280 x 85 mm *****NOTE***** Replacement pressure reducer for stationary Single bundle systems EB120 and base stations BS120. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel membrane SS321 (1.4541).
2130 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2131 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2132 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2133 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2134 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2135 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2136 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2137 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2138 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2139 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2140 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2141 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2142 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2143 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2144 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2145 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2146 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2147 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2148 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2149 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2150 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2151 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2152 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2153 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2154 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2155 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2156 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2157 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2158 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2159 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2160 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2161 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2162 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2163 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2164 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2165 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2166 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2167 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2168 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2169 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2170 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2171 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2172 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2173 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2174 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2175 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2176 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2177 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2178 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2179 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2180 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2181 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2182 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2183 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
2184 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3156 Main ribbed pressure reducer Vulkan HR60/300 EFFECT oxygen, for EB/BS 120/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, max. inlet pressure: 300 bar, outlet pressure: 15 - 60 bar adjustable, max. output: 450 Nm³/h air at 60 bar outlet pressure, inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 100/60 bar, width x height x depth: 240 x 280 x 85 mm *****NOTE***** Replacement pressure reducer for stationary Single bundle systems EB120 and base stations BS120. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel membrane SS321 (1.4541).
3676 Main ribbed pressure reducer Vulkan HR60/300 EFFECT oxygen, for EB/BS 120/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, max. inlet pressure: 300 bar, outlet pressure: 15 - 60 bar adjustable, max. output: 450 Nm³/h air at 60 bar outlet pressure, inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 100/60 bar, width x height x depth: 240 x 280 x 85 mm *****NOTE***** Replacement pressure reducer for stationary Single bundle systems EB120 and base stations BS120. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel membrane SS321 (1.4541).
3779 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3780 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3781 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3782 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3783 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3784 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3785 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3786 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3787 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3833 Tapping point pressure reducer EH40-20 oxygen 0.5 - 20 bar with safety pressure gauge according to ISO 5171, inlet pressure: max. 40 bar. Outlet pressure: 0.5 - 20 bar adjustable. Maximum output: 170 Nm³/h air at 10 bar back pressure. Inlet: G1/2 RHk U-nut according to EN 560. Outlet: G1/2 RHak according to EN 560. Working pressure gauge: 0 - 40/20 bar, mounted at a 90° angle. Width x Height x Depth: 90 x 180 x 90 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with a stainless steel membrane SS321. (1.4541) Special outlet screw connection: Standard:- G1/2 RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 1085302005 for technical gases up to 4.5, with standard membrane G1/2 RHak according to EN 560 1085302005-812 for technical gases up to 4.5, with standard membrane Hose nozzle G3/8" RHk x 9mm 1085302005-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 1085302005-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 1085302005-838 for technical gases up to 4.5, with standard membrane External thread G1/2" RHk according to EN 560 1085302005-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 1085302005-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 1085302005-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 1085302005-12M for technical gases up to 4.5, with standard membrane compression fitting VA 12mm 1085302005-2 for technical gases up to 4.5, with standard membrane compression fitting VA 1/8" 1085302005-4 for technical gases up to 4.5, with standard membrane compression fitting VA 1/4" 1085302005-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2 RHak according to EN 560 1085302005-MM-812 for pure gases up to 5.0, with metal membrane SS321 (1.4541) hose nozzle G3/8" RHk x 9mm 1085302005-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 1085302005-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 1085302005-MM-838 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" RHk according to EN 560 1085302005-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 1085302005-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 1085302005-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 1085302005-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 1085302005-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 1085302005-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
3834 Tapping point pressure reducer Vulkan E10 F Flowmeter Hydrogen 3-34 Nl/min based on ISO 2503, Class 10, single-stage design, with flowmeter to control the exact flow rate in Nl/min for perfect gas shielded welding, max. inlet pressure: 20 bar, outlet pressure: 4.5 bar, fixed output: max. 3-34 Nl/min. Hydrogen adjustable. Inlet: G 3/8 LH U-nut according to DIN EN 560. Outlet: G 3/8 LH x 9mm nozzle according to DIN EN 560. Width x Height x Depth: 120 x 210 x 65 mm. This tapping point pressure reducer is available in the following versions, among others: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane. Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541). Special outlet fitting: Standard: - hose nozzle G 3/8" LHk x 9mm. Options (surcharge): Order number: Gas purity/membrane. Outlet fitting 104906 for technical gases up to 4.5, with standard membrane. Hose nozzle G 3/8" LHk x 9mm. 104906-815 for technical gases up to 4.5, with standard membrane hose nozzle G3/8" LHk x 6mm 104906-814 for technical gases up to 4.5, with standard membrane external thread G3/8" LHk according to EN 560 104906-830 for technical gases up to 4.5, with standard membrane external thread G1/2" LHk according to EN 560 104906-6M for technical gases up to 4.5, with standard membrane compression fitting VA 6mm 104906-8M for technical gases up to 4.5, with standard membrane compression fitting VA 8mm 104906-10M for technical gases up to 4.5, with standard membrane compression fitting VA 10mm 104906-12M for technical gases up to 4.5, with Standard diaphragm compression fitting VA 12mm 104906-2 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/8" 104906-4 for technical gases up to 4.5, with standard diaphragm compression fitting VA 1/4" 104906-MM-815 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 6mm 104906-MM for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) hose nozzle G3/8" LHk x 9mm 104906-MM-814 for pure gases up to 5.0, with metal diaphragm SS321 (1.4541) external thread G3/8" LHk according to EN 560 104906-MM-830 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/2" LHk according to EN 560 104906-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 104906-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 104906-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 104906-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 104906-MM-2 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/8" 104906-MM-4 for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 1/4"
5131 Main ribbed pressure reducer Vulkan HR60/300 EFFECT oxygen, for EB/BS 120/300 according to ISO 7291, single-stage design, with pre-pressure compensation for constant outlet pressure with falling pre-pressure, burnout safety tested according to ISO 7291, with safety gauges according to ISO 5171, max. inlet pressure: 300 bar, outlet pressure: 15 - 60 bar adjustable, max. output: 450 Nm³/h air at 60 bar outlet pressure, inlet: M24x1.5 RHf U-nut, outlet: G1/2 RHk U-nut according to DIN EN 560, inlet pressure gauge: 0 - 400/300 bar, outlet pressure gauge: 0 - 100/60 bar, width x height x depth: 240 x 280 x 85 mm *****NOTE***** Replacement pressure reducer for stationary Single bundle systems EB120 and base stations BS120. This pressure reducer does NOT fit directly onto a cylinder bundle on the connection side! Please specify the system number when ordering! This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a purity of 4.5 with a standard membrane. Optional (surcharge): - for pure gases up to a purity of 5.0 with a stainless steel membrane SS321 (1.4541).
5390 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5391 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5392 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5393 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5394 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5395 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5396 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5397 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5398 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5399 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5400 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5401 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5402 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5403 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5404 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5405 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5406 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5407 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5408 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5409 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5410 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5411 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5412 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5413 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
5414 Main ribbed pressure reducer Vulkan HR60/300 EFFECT inert gas, DIN 477-5, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety gauges according to ISO 5171. Inlet pressure max: 300 bar. Outlet pressure: 15 – 60 bar adjustable. Output max: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G 1/2 RHak according to DIN EN 560. Inlet pressure gauge: 0 – 400/300 bar. Outlet pressure gauge: 0 – 100/60 bar. Width x Height x Depth: 240 x 330 x 85 mm. Important note for 300 bar pressure reducers - please check your Cylinder connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306568 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306568-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306568-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306568-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306568-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306568-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306568-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306568-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306568-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306568-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306568-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6728 Tapping Points: Pressure Reducer Vulkan E10F Flowmeter LabLine Forming Gas 34 Nl/min. Completely chrome-plated with metal diaphragms for gas purity 5.0, based on ISO 2503<br />Standards & Design:<br /><br />Class 20<br />single-stage design, with flowmeter for monitoring the exact flow rate in Nl/min<br />according to DIN EN 560<br /><br />Technical data:<br /><br />• Maximum inlet pressure: 20 bar<br />• Output pressure: 4<br />• Inlet: G 3/8 LHk U-nut according to DIN EN 560<br />• Outlet: 6mm double clamp ring, stainless steel<br /><br />Dimensions:<br /><br />Width x Height x Depth: 120 x 210 x 65 mm