Result
| product_id |
short_description |
full_description |
meta_keywords |
meta_description |
search_words |
promo_text |
unit_name |
| 1789 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1790 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1791 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1792 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1793 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1794 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1795 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1796 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1797 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1798 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1799 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1800 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1801 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1802 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1803 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1804 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1805 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1806 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1807 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1808 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1809 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1810 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1811 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1812 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1813 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1814 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1815 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1816 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1817 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1818 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 1819 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 3744 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 3745 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 3746 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 3747 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 5461 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 5462 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 5463 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 5464 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 5465 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 5466 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 5467 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 5468 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 5469 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 5470 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 5471 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 5472 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|
| 5473 |
|
Main finned pressure reducer Vulkan HR40/300 EFFECT inert gas DIN 477-5, 15-40 bar according to ISO 7291, single-stage design, burn-out tested according to ISO 7291, with pre-pressure compensation for constant outlet pressure under all operating conditions, with safety gauges according to ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 15 – 40 bar adjustable. Maximum output: 290 Nm³/h compressed air at 40 bar outlet pressure. Inlet: W 30x2 RH U-nut according to DIN 477-5, No. 54. Outlet: G1/2 RHak according to EN 560. Inlet gauge: 0 – 400/300 bar. Outlet gauge: 0 – 60/40 bar. Width x Height x Depth: 240 x 280 x 85 mm. Important note for 300 bar. Pressure reducers - Please check your cylinder connection! Cylinder pressure reducers for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure reducers. This main ribbed pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard diaphragm Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel diaphragm SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 306546 for technical gases up to 4.5, with standard diaphragm G1/2RHak according to EN 560 306546-800 for technical gases up to 4.5, with standard diaphragm external thread G1/4" RHk according to EN560 306546-870 for technical gases up to 4.5, with standard diaphragm external thread G3/8" RHk according to EN 560 306546-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 306546-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 306546-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 306546-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 306546-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 306546-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 306546-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 306546-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 306546-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 306546-MM-6M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 306546-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 306546-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 306546-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 306546-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 306546-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm |
|
|
|
|
|