SELECT 
  cscart_ult_product_descriptions.product_id, 
  cscart_ult_product_descriptions.short_description, 
  IF(
    cscart_ult_product_descriptions.short_description = "", 
    cscart_ult_product_descriptions.full_description, 
    ""
  ) AS full_description, 
  cscart_ult_product_descriptions.meta_keywords, 
  cscart_ult_product_descriptions.meta_description, 
  cscart_ult_product_descriptions.search_words, 
  cscart_ult_product_descriptions.promo_text 
FROM 
  cscart_ult_product_descriptions 
WHERE 
  cscart_ult_product_descriptions.product_id IN (
    6024, 6025, 6026, 6027, 6028, 6029, 6030, 
    6031, 6032, 6033, 6034, 6035
  ) 
  AND cscart_ult_product_descriptions.company_id = 1 
  AND cscart_ult_product_descriptions.lang_code = 'en'

Query time 0.00062

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "9.47"
    },
    "table": {
      "table_name": "cscart_ult_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id",
        "company_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code",
        "company_id"
      ],
      "key_length": "13",
      "rows_examined_per_scan": 12,
      "rows_produced_per_join": 12,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_ult_product_descriptions`.`company_id` = 1) and (`gaseus`.`cscart_ult_product_descriptions`.`product_id` in (6024,6025,6026,6027,6028,6029,6030,6031,6032,6033,6034,6035)) and (`gaseus`.`cscart_ult_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "8.27",
        "eval_cost": "1.20",
        "prefix_cost": "9.47",
        "data_read_per_join": "45K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "company_id",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text
6024 Main pressure reducer Vulkan H40/300 Effect nitrogen DIN 477-5, 0 - 40 bar, 120 Nm?/h according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 40 bar adjustable. Maximum output: 120 Nm?/h at 40 bar back pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x height x depth: 200 x 210 x 75 mm. Important note for 300 bar pressure reducers - please check your bottle connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 303540 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 303540-800 for technical gases up to 4.5, with standard membrane external thread G1/4" RHk according to EN560 303540-870 for technical gases up to 4.5, with standard membrane external thread G3/8" RHk according to EN 560 303540-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 303540-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 303540-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 303540-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 303540-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 303540-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 303540-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 303540-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 303540-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 303540-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 303540-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 303540-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 303540-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 303540-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 303540-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6025 Main pressure reducer Vulkan H40/300 Effect nitrogen DIN 477-5, 0 - 40 bar, 120 Nm?/h according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 40 bar adjustable. Maximum output: 120 Nm?/h at 40 bar back pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x height x depth: 200 x 210 x 75 mm. Important note for 300 bar pressure reducers - please check your bottle connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 303540 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 303540-800 for technical gases up to 4.5, with standard membrane external thread G1/4" RHk according to EN560 303540-870 for technical gases up to 4.5, with standard membrane external thread G3/8" RHk according to EN 560 303540-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 303540-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 303540-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 303540-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 303540-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 303540-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 303540-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 303540-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 303540-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 303540-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 303540-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 303540-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 303540-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 303540-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 303540-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6026 Main pressure reducer Vulkan H40/300 Effect nitrogen DIN 477-5, 0 - 40 bar, 120 Nm?/h according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 40 bar adjustable. Maximum output: 120 Nm?/h at 40 bar back pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x height x depth: 200 x 210 x 75 mm. Important note for 300 bar pressure reducers - please check your bottle connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 303540 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 303540-800 for technical gases up to 4.5, with standard membrane external thread G1/4" RHk according to EN560 303540-870 for technical gases up to 4.5, with standard membrane external thread G3/8" RHk according to EN 560 303540-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 303540-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 303540-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 303540-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 303540-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 303540-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 303540-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 303540-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 303540-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 303540-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 303540-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 303540-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 303540-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 303540-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 303540-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6027 Main pressure reducer Vulkan H40/300 Effect nitrogen DIN 477-5, 0 - 40 bar, 120 Nm?/h according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 40 bar adjustable. Maximum output: 120 Nm?/h at 40 bar back pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x height x depth: 200 x 210 x 75 mm. Important note for 300 bar pressure reducers - please check your bottle connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 303540 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 303540-800 for technical gases up to 4.5, with standard membrane external thread G1/4" RHk according to EN560 303540-870 for technical gases up to 4.5, with standard membrane external thread G3/8" RHk according to EN 560 303540-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 303540-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 303540-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 303540-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 303540-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 303540-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 303540-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 303540-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 303540-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 303540-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 303540-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 303540-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 303540-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 303540-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 303540-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6028 Main pressure reducer Vulkan H40/300 Effect nitrogen DIN 477-5, 0 - 40 bar, 120 Nm?/h according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 40 bar adjustable. Maximum output: 120 Nm?/h at 40 bar back pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x height x depth: 200 x 210 x 75 mm. Important note for 300 bar pressure reducers - please check your bottle connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 303540 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 303540-800 for technical gases up to 4.5, with standard membrane external thread G1/4" RHk according to EN560 303540-870 for technical gases up to 4.5, with standard membrane external thread G3/8" RHk according to EN 560 303540-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 303540-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 303540-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 303540-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 303540-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 303540-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 303540-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 303540-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 303540-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 303540-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 303540-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 303540-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 303540-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 303540-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 303540-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6029 Main pressure reducer Vulkan H40/300 Effect nitrogen DIN 477-5, 0 - 40 bar, 120 Nm?/h according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 40 bar adjustable. Maximum output: 120 Nm?/h at 40 bar back pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x height x depth: 200 x 210 x 75 mm. Important note for 300 bar pressure reducers - please check your bottle connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 303540 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 303540-800 for technical gases up to 4.5, with standard membrane external thread G1/4" RHk according to EN560 303540-870 for technical gases up to 4.5, with standard membrane external thread G3/8" RHk according to EN 560 303540-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 303540-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 303540-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 303540-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 303540-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 303540-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 303540-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 303540-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 303540-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 303540-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 303540-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 303540-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 303540-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 303540-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 303540-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6030 Main pressure reducer Vulkan H40/300 Effect nitrogen DIN 477-5, 0 - 40 bar, 120 Nm?/h according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 40 bar adjustable. Maximum output: 120 Nm?/h at 40 bar back pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x height x depth: 200 x 210 x 75 mm. Important note for 300 bar pressure reducers - please check your bottle connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 303540 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 303540-800 for technical gases up to 4.5, with standard membrane external thread G1/4" RHk according to EN560 303540-870 for technical gases up to 4.5, with standard membrane external thread G3/8" RHk according to EN 560 303540-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 303540-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 303540-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 303540-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 303540-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 303540-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 303540-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 303540-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 303540-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 303540-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 303540-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 303540-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 303540-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 303540-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 303540-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6031 Main pressure reducer Vulkan H40/300 Effect nitrogen DIN 477-5, 0 - 40 bar, 120 Nm?/h according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 40 bar adjustable. Maximum output: 120 Nm?/h at 40 bar back pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x height x depth: 200 x 210 x 75 mm. Important note for 300 bar pressure reducers - please check your bottle connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 303540 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 303540-800 for technical gases up to 4.5, with standard membrane external thread G1/4" RHk according to EN560 303540-870 for technical gases up to 4.5, with standard membrane external thread G3/8" RHk according to EN 560 303540-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 303540-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 303540-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 303540-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 303540-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 303540-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 303540-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 303540-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 303540-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 303540-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 303540-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 303540-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 303540-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 303540-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 303540-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6032 Main pressure reducer Vulkan H40/300 Effect nitrogen DIN 477-5, 0 - 40 bar, 120 Nm?/h according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 40 bar adjustable. Maximum output: 120 Nm?/h at 40 bar back pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x height x depth: 200 x 210 x 75 mm. Important note for 300 bar pressure reducers - please check your bottle connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 303540 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 303540-800 for technical gases up to 4.5, with standard membrane external thread G1/4" RHk according to EN560 303540-870 for technical gases up to 4.5, with standard membrane external thread G3/8" RHk according to EN 560 303540-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 303540-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 303540-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 303540-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 303540-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 303540-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 303540-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 303540-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 303540-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 303540-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 303540-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 303540-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 303540-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 303540-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 303540-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6033 Main pressure reducer Vulkan H40/300 Effect nitrogen DIN 477-5, 0 - 40 bar, 120 Nm?/h according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 40 bar adjustable. Maximum output: 120 Nm?/h at 40 bar back pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x height x depth: 200 x 210 x 75 mm. Important note for 300 bar pressure reducers - please check your bottle connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 303540 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 303540-800 for technical gases up to 4.5, with standard membrane external thread G1/4" RHk according to EN560 303540-870 for technical gases up to 4.5, with standard membrane external thread G3/8" RHk according to EN 560 303540-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 303540-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 303540-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 303540-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 303540-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 303540-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 303540-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 303540-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 303540-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 303540-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 303540-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 303540-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 303540-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 303540-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 303540-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6034 Main pressure reducer Vulkan H40/300 Effect nitrogen DIN 477-5, 0 - 40 bar, 120 Nm?/h according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 40 bar adjustable. Maximum output: 120 Nm?/h at 40 bar back pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x height x depth: 200 x 210 x 75 mm. Important note for 300 bar pressure reducers - please check your bottle connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 303540 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 303540-800 for technical gases up to 4.5, with standard membrane external thread G1/4" RHk according to EN560 303540-870 for technical gases up to 4.5, with standard membrane external thread G3/8" RHk according to EN 560 303540-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 303540-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 303540-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 303540-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 303540-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 303540-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 303540-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 303540-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 303540-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 303540-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 303540-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 303540-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 303540-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 303540-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 303540-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
6035 Main pressure reducer Vulkan H40/300 Effect nitrogen DIN 477-5, 0 - 40 bar, 120 Nm?/h according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure with falling pre-pressure, with safety pressure gauges according to DIN EN ISO 5171. Maximum inlet pressure: 300 bar. Output pressure: 0 - 40 bar adjustable. Maximum output: 120 Nm?/h at 40 bar back pressure. Inlet: W30x2RH U-nut according to DIN 477-5. Outlet connection: G1/2RHak according to EN 560. Inlet pressure gauge: 0 - 400/300 bar. Outlet pressure gauge: 0 - 60/40 bar. Width x height x depth: 200 x 210 x 75 mm. Important note for 300 bar pressure reducers - please check your bottle connection! Cylinder pressure regulators for 300 bar have a manual connection according to DIN 477 Part 5 and are NOT backward compatible. This means they do NOT fit cylinders with a maximum filling pressure of 200 bar! If necessary, see our following tutorial, 3: Difference between 200 bar and 300 bar pressure regulators. This main pressure reducer is available in the following versions, among others: Gas purity/diaphragm: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item number Gas purity Outlet connection 303540 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 303540-800 for technical gases up to 4.5, with standard membrane external thread G1/4" RHk according to EN560 303540-870 for technical gases up to 4.5, with standard membrane external thread G3/8" RHk according to EN 560 303540-6M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 6mm 303540-8M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 8mm 303540-10M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 10mm 303540-12M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 12mm 303540-15M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 15mm 303540-18M for technical gases up to 4.5, with standard membrane, compression fitting made of stainless steel 18mm 303540-MM for pure gases up to 5.0, with metal membrane made of SS321 (1.4541) G1/2RHak according to EN 560 303540-MM-800 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 303540-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 303540-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 303540-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 303540-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 303540-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 303540-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 303540-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm