SELECT 
  cscart_product_descriptions.product_id, 
  cscart_product_descriptions.short_description, 
  IF(
    cscart_product_descriptions.short_description = '' 
    OR cscart_product_descriptions.short_description IS NULL, 
    cscart_product_descriptions.full_description, 
    ''
  ) AS full_description, 
  cscart_product_descriptions.meta_keywords, 
  cscart_product_descriptions.meta_description, 
  cscart_product_descriptions.search_words, 
  cscart_product_descriptions.promo_text, 
  cscart_product_descriptions.unit_name 
FROM 
  cscart_product_descriptions 
WHERE 
  cscart_product_descriptions.product_id IN (
    1735, 1736, 1737, 1738, 1739, 1740, 1741, 
    1742, 1743, 1744, 1745, 1746, 1747, 
    1748, 1749, 1750, 1751, 1752, 1753, 
    1754, 1755, 1756, 1757, 1758
  ) 
  AND cscart_product_descriptions.lang_code = 'en'

Query time 0.00056

JSON explain

{
  "query_block": {
    "select_id": 1,
    "cost_info": {
      "query_cost": "28.91"
    },
    "table": {
      "table_name": "cscart_product_descriptions",
      "access_type": "range",
      "possible_keys": [
        "PRIMARY",
        "product_id"
      ],
      "key": "PRIMARY",
      "used_key_parts": [
        "product_id",
        "lang_code"
      ],
      "key_length": "9",
      "rows_examined_per_scan": 24,
      "rows_produced_per_join": 24,
      "filtered": "100.00",
      "index_condition": "((`gaseus`.`cscart_product_descriptions`.`product_id` in (1735,1736,1737,1738,1739,1740,1741,1742,1743,1744,1745,1746,1747,1748,1749,1750,1751,1752,1753,1754,1755,1756,1757,1758)) and (`gaseus`.`cscart_product_descriptions`.`lang_code` = 'en'))",
      "cost_info": {
        "read_cost": "26.51",
        "eval_cost": "2.40",
        "prefix_cost": "28.91",
        "data_read_per_join": "109K"
      },
      "used_columns": [
        "product_id",
        "lang_code",
        "short_description",
        "full_description",
        "meta_keywords",
        "meta_description",
        "search_words",
        "promo_text",
        "unit_name"
      ]
    }
  }
}

Result

product_id short_description full_description meta_keywords meta_description search_words promo_text unit_name
1735 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1736 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1737 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1738 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1739 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1740 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1741 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1742 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1743 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1744 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1745 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1746 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1747 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1748 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1749 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1750 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1751 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1752 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1753 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1754 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1755 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1756 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1757 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm
1758 Main ribbed pressure reducer Vulkan HR60/200 EFFECT inert gas, DIN 477-1, 15-60 bar according to ISO 7291, single-stage design, with pre-pressure compensation for constant back pressure under all operating conditions, with safety gauges according to ISO 5171, max. inlet pressure: 200 bar, outlet pressure: 15 – 60 bar adjustable, max. output: 450 Nm³/h compressed air at 60 bar back pressure. Inlet: W21.8x1/14 RHf U-nut according to DIN 477-1, No. 6, Outlet: G1/2 RHak according to EN 560, inlet pressure gauge: 0 – 315/200 bar, outlet pressure gauge: 0 – 100/60 bar, width x height x depth: 240 x 280 x 85 mm. This main pressure reducer is available in the following, among others: Versions: Gas purity/membrane: Standard: - for technical gases up to a gas purity of 4.5 with standard membrane Optional (surcharge): - for pure gases up to a gas purity of 5.0 with stainless steel membrane SS321 (1.4541) Special outlet screw connection: Standard: - G1/2RHak according to EN 560 Options (surcharge): Item numberGas purityOutlet connection 206568 for technical gases up to 4.5, with standard membrane G1/2RHak according to EN 560 206568-800 for technical gases up to 4.5, with standard membrane External thread G1/4" RHk according to EN560 206568-870 for technical gases up to 4.5, with standard membrane External thread G3/8" RHk according to EN 560 206568-6M for technical gases up to 4.5, with standard membrane Compression fitting VA 6mm 206568-8M for technical gases up to 4.5, with standard membrane Compression fitting VA 8mm 206568-10M for technical gases up to 4.5, with standard membrane Compression fitting VA 10mm 206568-12M for technical gases up to 4.5, with standard membrane Compression fitting VA 12mm 206568-15M for technical gases up to 4.5, with standard membrane Compression fitting VA 15mm 206568-18M for technical gases up to 4.5, with standard membrane Compression fitting VA 18mm 206568-MM for pure gases up to 5.0, with metal membrane SS321 (1.4541) G1/2RHak according to EN 560 206568-MM-800 for pure Gases up to 5.0, with metal membrane SS321 (1.4541) external thread G1/4" RHk according to EN560 206568-MM-870 for pure gases up to 5.0, with metal membrane SS321 (1.4541) external thread G3/8" RHk according to EN 560 206568-MM-6M ​​for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 6mm 206568-MM-8M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 8mm 206568-MM-10M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 10mm 206568-MM-12M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 12mm 206568-MM-15M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 15mm 206568-MM-18M for pure gases up to 5.0, with metal membrane SS321 (1.4541) compression fitting VA 18mm